* gen-engine.c (print_engine_issue_prefix_hook): Don't add the
global prefix to ENGINE_ISSUE_PREFIX_HOOK.
(print_engine_issue_postfix_hook): Likewise ENGINE_ISSUE_POSTFIX_HOOK.
This patch fixes the gcc.dg/nest.c failures for sh-elf.
Fri Oct 11 16:22:28 2002 J"orn Rennecke <joern.rennecke@superh.com>
* interp.c (trap): Return int. Take extra parameter for address
of the trap instruction. Changed all callers.
Add case 33 for profiling.
* gencode.c (trapa): Handle trap 33 using the trap function.
Add read of vector for generic traps.
bank window to some virtual address to read from extended memory.
(m68hc11cpu_io_write_buffer): Likewise for writing.
(attach_m68hc11_regs): When use_bank property is defined, attached
to the 68HC12 16K memory bank window.
* interp.c (sim_hw_configure): Create memory region for banked
memory.
* sim-main.h (M6812_CALL_INDIRECT): Add to enum.
(m6811_regs): Add page register.
(cpu_set_page, cpu_get_page): New macros.
(phys_to_virt): New function.
(cpu_get_indexed_operand_addr, cpu_return): Declare.
* gencode.c: Identify indirect addressing mode for call and fix daa.
(gen_function_entry): New param to tell if src8/dst8 locals are
necessary.
(gen_interpreter): Use it to avoid generation of unused variables.
* interp.c (sim_fetch_register): Allow to read page register; page
register, A, B and CCR are only 1 byte wide.
(sim_store_register): Likewise for writing.
* mips.igen (do_load_double, do_store_double): New functions.
(LDC1, SDC1): Rename to...
(LDC1b, SDC1b): respectively.
(LDC1a, SDC1a): New instructions for MIPS II and MIPS32 support.
* sim-sh.h: Add enum constants for sh[1-4], sh3e, sh3?-dsp,
renumbering the sh-dsp registers to use distinct numbers.
sim/sh:
* Makefile.in (interp.o): Depend on $(srcroot)/include/gdb/sim-sh.h.
* interp.c: Include "gdb/sim-sh.h".
(sim_store_register, sim_fetch_register): Use constants defined there.
gdb:
* sh-tdep.c (sh_dsp_register_sim_regno): New function.
(sh_gdbarch_init): Use it for sh-dsp.
* mdmx.c (SD_): Delete.
(Unpredictable): Re-define, for now, to directly invoke
unpredictable_action().
(mdmx_acc_op): Fix error in .ob immediate handling.
Ed Satterthwaite <ehs@broadcom.com>
* mips3d.igen: New file which contains MIPS-3D ASE instructions.
* Makefile.in (IGEN_INCLUDE): Add mips3d.igen.
* mips.igen: Include mips3d.igen.
(mips3d): New model name for MIPS-3D ASE instructions.
(CVT.W.fmt): Don't use this instruction for word (source) format
instructions.
* cp1.c (fp_binary_r, fp_add_r, fp_mul_r, fpu_inv1, fpu_inv1_32)
(fpu_inv1_64, fp_recip1, fp_recip2, fpu_inv_sqrt1, fpu_inv_sqrt1_32)
(fpu_inv_sqrt1_64, fp_rsqrt1, fp_rsqrt2): New functions.
(NR_FRAC_GUARD, IMPLICIT_1): New macros.
* sim-main.h (fmt_pw, CompareAbs, AddR, MultiplyR, Recip1, Recip2)
(RSquareRoot1, RSquareRoot2): New macros.
(fp_add_r, fp_mul_r, fp_recip1, fp_recip2, fp_rsqrt1)
(fp_rsqrt2): New functions.
* configure.in: Add MIPS-3D support to mipsisa64 simulator.
* configure: Regenerate.
* cp1.c (FP_PS_upper, FP_PS_lower, FP_PS_cat, FPQNaN_PS): New macros.
(value_fpr, store_fpr, fp_cmp, fp_unary, fp_binary, fp_mac)
(fp_inv_sqrt, fpu_format_name): Add paired-single support.
(convert): Note that this function is not used for paired-single
format conversions.
(ps_lower, ps_upper, pack_ps, convert_ps): New functions.
* mips.igen (FMT, MOVtf.fmt): Add paired-single support.
(check_fmt_p): Enable paired-single support.
(ALNV.PS, CVT.PS.S, CVT.S.PL, CVT.S.PU, PLL.PS, PLU.PS, PUL.PS)
(PUU.PS): New instructions.
(CVT.S.fmt): Don't use this instruction for paired-single format
destinations.
* sim-main.h (FP_formats): New value 'fmt_ps.'
(ps_lower, ps_upper, pack_ps, convert_ps): New prototypes.
(PSLower, PSUpper, PackPS, ConvertPS): New macros.
* mips.igen (MOVN, MOVZ): Trace result.
(TNEI): Print "tnei" as the opcode name in traces.
(CEIL.W): Add disassembly string for traces.
(RSQRT.fmt): Make location of disassembly string consistent
with other instructions.
Ed Satterthwaite <ehs@broadcom.com>
* cp1.c: Fix more comment spelling and formatting.
(value_fcr, store_fcr): Use fenr_FS rather than hard-coding value.
(denorm_mode): New function.
(fpu_unary, fpu_binary): Round results after operation, collect
status from rounding operations, and update the FCSR.
(convert): Collect status from integer conversions and rounding
operations, and update the FCSR. Adjust NaN values that result
from conversions. Convert to use sim_io_eprintf rather than
fprintf, and remove some debugging code.
* cp1.h (fenr_FS): New define.
(z8k_inv_list): Delete global.
(DIRTY_HACK): Delete macro.
(makelist): Delete global.
(main): Delete code making a list. Delete dirty hack code. Use
lookup_inst instead of z8k_inv_list.
* list.c: Delete file.
* Makefile.in (writecode): Do not link in list.o.
(list.o): Delete target.
* sim-main.h (FGRIDX): Remove, replace all uses with...
(FGR_BASE): New macro.
(FP0_REGNUM, FCRCS_REGNUM, FCRIR_REGNUM): New macros.
(_sim_cpu): Move 'fgr' member to be right before 'fpr_state' member.
(NR_FGR, FGR): Likewise.
* interp.c: Replace all uses of FGRIDX with FGR_BASE.
* mips.igen: Likewise.
* sim-main.h (Nan, Infinity, Less, Equal, AbsoluteValue, Negate)
(Add, Sub, Multiply, Divide, Recip, SquareRoot): Move lower in
file, remove PARAMS from prototypes.
(value_fpr, store_fpr, convert): Likewise. Use SIM_STATE to provide
simulator state arguments.
(ValueFPR, StoreFPR, Convert): Move lower in file. Use SIM_ARGS to
pass simulator state arguments.
* cp1.c (SD): Redefine as CPU_STATE(cpu).
(store_fpr, convert): Remove 'sd' argument.
(value_fpr): Likewise. Convert to use 'SD' instead.
Ed Satterthwaite <ehs@broadcom.com>
* configure.in (mipsisa64sb1*-*-*): New target for supporting
Broadcom SiByte SB-1 processor configurations.
* configure: Regenerate.
* sb1.igen: New file.
* mips.igen: Include sb1.igen.
(sb1): New model.
* Makefile.in (IGEN_INCLUDE): Add sb1.igen.
* mdmx.igen: Add "sb1" model to all appropriate functions and
instructions.
* mdmx.c (AbsDiffOB, AvgOB, AccAbsDiffOB): New functions.
(ob_func, ob_acc): Reference the above.
(qh_acc): Adjust to keep the same size as ob_acc.
* sim-main.h (status_SBX, MX_VECT_ABSD, MX_VECT_AVG, MX_AbsDiff)
(MX_Avg, MX_VECT_ABSDA, MX_AbsDiffC): New macros.
* interp.c (sim_create_inferior): Add comment.
From Alan Matsuoka <alanm@redhat.com>:
From 2001-04-27 Jason Eckhardt <jle@cygnus.com>:
* simops.c (OP_4400): Output "mvf0f" instead of "mf0f".
(OP_4401): Output "mvf0t" instead of "mf0t".
(OP_460B): Do not output a flag register.
(OP_4609): Do not output a flag register.
* sim-d10v.h: New file. Moved from include/sim-d10v.h.
* Makefile.in (INCLUDE): Add "gdb/sim-d10v.h".
* interp.c: Include "gdb/sim-d10v.h" instead of "sim-d10v.h".
* d10v-tdep.c: Include "gdb/sim-d10v.h" instead of "sim-d10v.h".
* Makefile.in (sim_d10v_h): Update definition.
include:
* dis-asm.h (print_insn_shl, print_insn_sh64l): Remove prototype.
gdb:
* sh-tdep.c (gdb_print_insn_sh64): Delete.
(gdb_print_insn_sh): Just set info->endian and use print_insn_sh.
(sh_gdbarch_init): Always use gdb_print_insn_sh.
opcodes:
* disassemble.c (disassembler): Just use print_insn_sh for bfd_arch_sh.
* sh-dis.c (LITTLE_BIT): Delete.
(print_insn_sh, print_insn_shl): Deleted.
(print_insn_shx): Renamed to
(print_insn_sh). No longer static. Handle SHmedia instructions.
Use info->endian to determine endianness.
* sh64-dis.c (print_insn_sh64, print_insn_sh64l): Delete.
(print_insn_sh64x): No longer static. Renamed to
(print_insn_sh64). Removed pfun_compact and endian arguments.
If we got an uneven address to indicate SHmedia, adjust it.
Return -2 for SHcompact instructions.
sim/sh64:
* sim-if.c (sh64_disassemble_insn): Use print_insn_sh instead of
print_insn_shl.
2002-05-01 Chris Demetriou <cgd@broadcom.com>
* callback.c: Use 'deprecated' rather than 'depreciated.'
[ igen/ChangeLog ]
2002-05-01 Chris Demetriou <cgd@broadcom.com>
* igen.c: Use 'deprecated' rather than 'depreciated.'
[ mips/ChangeLog ]
2002-05-01 Chris Demetriou <cgd@broadcom.com>
* interp.c: Use 'deprecated' rather than 'depreciated.'
* sim-main.h: Likewise.
* cp1.c (store_fpr): Remove #ifdef'd out call to UndefinedResult
which wouldn't compile anyway.
* sim-main.h (unpredictable_action): New function prototype.
(Unpredictable): Define to call igen function unpredictable().
(NotWordValue): New macro to call igen function not_word_value().
(UndefinedResult): Remove.
* interp.c (undefined_result): Remove.
(unpredictable_action): New function.
* mips.igen (not_word_value, unpredictable): New functions.
(ADD, ADDI, do_addiu, do_addu, BGEZAL, BGEZALL, BLTZAL, BLTZALL)
(CLO, CLZ, MADD, MADDU, MSUB, MSUBU, MUL, do_mult, do_multu)
(do_sra, do_srav, do_srl, do_srlv, SUB, do_subu): Invoke
NotWordValue() to check for unpredictable inputs, then
Unpredictable() to handle them.
* ppc-instructions (lswx): Do the register control with the
register count. Initialize the right register in the loop.
(mtfsfi) : Correct prefix for the instruction.
* cp1.c (fpu_format_name): New function to replace...
(DOFMT): This. Delete, and update all callers.
(fpu_rounding_mode_name): New function to replace...
(RMMODE): This. Delete, and update all callers.
* interp.c: Move FPU support routines from here to...
* cp1.c: Here. New file.
* Makefile.in (SIM_OBJS): Add cp1.o to object list.
(cp1.o): New target.
* configure.in (mipsisa32*-*-*, mipsisa64*-*-*): New targets.
* mips.igen (mips32, mips64): New models, add to all instructions
and functions as appropriate.
(loadstore_ea, check_u64): New variant for model mips64.
(check_fmt_p): New variant for models mipsV and mips64, remove
mipsV model marking fro other variant.
(SLL) Rename to...
(SLLa) this.
(CLO, CLZ, MADD, MADDU, MSUB, MSUBU, MUL, SLLb): New instructions
for mips32 and mips64.
(DCLO, DCLZ): New instructions for mips64.
* mips.igen (BREAK, LUI, ORI, SYSCALL, XORI): Print
immediate or code as a hex value with the "%#lx" format.
(ANDI): Likewise, and fix printed instruction name.
cpu struct.
(sim_hw_configure): Connect the capture input/output events.
* sim-main.h (_sim_cpu): New member hw_cpu.
(m68hc11cpu_set_oscillator): Declare.
(m68hc11cpu_clear_oscillator): Declare.
(m68hc11cpu_set_port): Declare.
* dv-m68hc11.c (m68hc11_options): New for oscillator commands.
(m68hc11cpu_ports): New input ports and output ports to reflect
the HC11 IOs.
(m68hc11_delete): Cleanup any running oscillator.
(attach_m68hc11_regs): Create the input oscillators.
(make_oscillator): New function.
(find_oscillator): New function.
(oscillator_handler): New function.
(reset_oscillators): New function.
(m68hc11cpu_port_event): Handle the new input ports.
(m68hc11cpu_set_oscillator): New function.
(m68hc11cpu_clear_oscillator): New function.
(get_frequency): New function.
(m68hc11_option_handler): New function.
(m68hc11cpu_set_port): New function.
(m68hc11cpu_io_write): Post the port output events.
* dv-m68hc11spi.c (set_bit_port): Use m68hc11cpu_set_port to set
the output port value.
* dv-m68hc11tim.c (m68hc11tim_port_event): Handle CAPTURE event
by latching the TCNT value in the register.
vector address according to cpu mode.
(interrupts_initialize): Move reset portion to the above.
(interrupt_names): New table to give a name to interrupts.
(idefs): Handle pulse accumulator interrupts.
(interrupts_info): Print the interrupt history.
(interrupt_option_handler): New function.
(interrupt_options): New table of options.
(interrupts_update_pending): Keep track of when interrupts are
raised and implement breakpoint-on-raise-interrupt.
(interrupts_process): Keep track of when interrupts are taken
and implement breakpoint-on-interrupt.
* interrupts.h (struct interrupt_history): Define.
(struct interrupt): Keep track of the interrupt history.
(interrupts_reset): Declare.
(interrupts_initialize): Update prototype.
* m68hc11_sim.c (cpu_reset): Reset interrupts.
(cpu_initialize): Cleanup.
* sim-main.h (status_UX, status_SX, status_KX, status_TS)
(status_PX, status_MX, status_CU0, status_CU1, status_CU2)
(status_CU3): New definitions.
* sim-main.h (ExceptionCause): Add new values for MIPS32
and MIPS64: MDMX, MCheck, CacheErr. Update comments
for DebugBreakPoint and NMIReset to note their status in
MIPS32 and MIPS64.
(SignalExceptionMDMX, SignalExceptionWatch, SignalExceptionMCheck)
(SignalExceptionCacheErr): New exception macros.
* mips.igen (check_fpu): Enable check for coprocessor 1 usability.
* sim-main.h (COP_Usable): Define, but for now coprocessor 1
is always enabled.
(SignalExceptionCoProcessorUnusable): Take as argument the
unusable coprocessor number.
* mips.igen (check_fmt, check_fmt_p): New functions to check
whether specific floating point formats are usable.
(ABS.fmt, ADD.fmt, CEIL.L.fmt, CEIL.W, DIV.fmt, FLOOR.L.fmt)
(FLOOR.W.fmt, MOV.fmt, MUL.fmt, NEG.fmt, RECIP.fmt, ROUND.L.fmt)
(ROUND.W.fmt, RSQRT.fmt, SQRT.fmt, SUB.fmt, TRUNC.L.fmt, TRUNC.W):
Use the new functions.
(do_c_cond_fmt): Remove format checks...
(C.cond.fmta, C.cond.fmtb): And move them into all callers.
* mips.igen (loadstore_ea): New function to do effective
address calculations.
(do_load, do_load_left, do_load_right, LL, LDD, PREF, do_store,
do_store_left, do_store_right, SC, SCD, PREFX, SWC1, SWXC1,
CACHE): Use loadstore_ea to do effective address computations.
* mips.igen (PREFX): Tweak instruction opcode fields (i.e.,
add a comma) so that it more closely match the MIPS ISA
documentation opcode partitioning.
(PREF): Put useful names on opcode fields, and include
instruction-printing string.
* mips.igen (check_u64): New function which in the future will
check whether 64-bit instructions are usable and signal an
exception if not. Currently a no-op.
(DADD, DADDI, DADDIU, DADDU, DDIV, DDIVU, DMULT, DMULTU, DSLL,
DSLL32, DSLLV, DSRA, DSRA32, DSRAV, DSRL, DSRL32, DSRLV, DSUB,
DSUBU, LD, LDL, LDR, LLD, LWU, SCD, SD, SDL, SDR, DMxC1, LDXC1,
LWXC1, SDXC1, SWXC1, DMFC0, DMTC0): Use check_u64.
* mips.igen (check_fpu): New function which in the future will
check whether FPU instructions are usable and signal an exception
if not. Currently a no-op.
(ABS.fmt, ADD.fmt, BC1a, BC1b, C.cond.fmta, C.cond.fmtb,
CEIL.L.fmt, CEIL.W, CxC1, CVT.D.fmt, CVT.L.fmt, CVT.S.fmt,
CVT.W.fmt, DIV.fmt, DMxC1, DMxC1, FLOOR.L.fmt, FLOOR.W.fmt, LDC1,
LDXC1, LWC1, LWXC1, MADD.D, MADD.S, MxC1, MOV.fmt, MOVtf,
MOVtf.fmt, MOVN.fmt, MOVZ.fmt, MSUB.D, MSUB.S, MUL.fmt, NEG.fmt,
NMADD.D, NMADD.S, NMSUB.D, NMSUB.S, RECIP.fmt, ROUND.L.fmt,
ROUND.W.fmt, RSQRT.fmt, SDC1, SDXC1, SQRT.fmt, SUB.fmt, SWC1,
SWXC1, TRUNC.L.fmt, TRUNC.W): Use check_fpu.
* mips.igen (do_load_left, do_load_right): Move to be immediately
following do_load.
(do_store_left, do_store_right): Move to be immediately following
do_store.
* mips.igen: Add some additional comments about supported
models, and about which instructions go where.
(BC1b, MFC0, MTC0, RFE): Sort supported models in the same
order as is used in the rest of the file.
* mips.igen (ADD, ADDI, DADDI, DSUB, SUB): Add comment
indicating that ALU32_END or ALU64_END are there to check
for overflow.
(DADD): Likewise, but also remove previous comment about
overflow checking.
* mips.igen (ADDI): Print immediate value.
(BREAK): Print code.
(DADDIU, DSRAV, DSRLV): Print correct instruction name.
(SLL): Print "nop" specially, and don't run the code
that does the shift for the "nop" case.
* igen.c (main): Change -I to add include paths for :include:
files.
Implement -G as per sim/igen, with just gen-icache=N support.
Call load_insn_table() with the built include path.
* ld-insn.c (parse_include_entry): New. Load an :include: file.
(load_insn_table): New `includes' argument. Look for :include:
entries and call parse_include_entry() for them.
(main): Adjust load_insn_table() call.
* ld-insn.h (model_include_fields): New enum.
(load_insn_table): Update prototype.
* table.c (struct _open_table, struct _table): Rework
structures to handle included files.
(table_push): Move the guts of table_open() here.
* table.c (struct _open table, struct table): Make table object an
indirect ptr to the current table file.
(current_line, new_table_entry, next_line): Make file arg type
open_table.
(table_open): Use table_push.
(table_entry_read): Point variable file at current table, at eof, pop
last open table.
* misc.h (NZALLOC): New macro. From sim/igen.
* table.h, table.c (table_push): New function.
(tmp-gencode, gencode.o, gencode): Delete targets.
(simops.h): New file.
($(BUILT_SRC_FROM_IGEN)): Do not depend on simops.h.
* gencode.c: Delete file.
* hw_htab.c (htab_map_binary): Don't try to map the text section
when it is empty.
* emul_chirp.c (map_over_chirp_note): Default load-base to -1 not
CHIRP_LOAD_BASE.
(emul_chirp_create): Map in the interrupt table.
* lib/sim-defs.exp (run_sim_test): Include a description such as
"assembling" or "linking" that identifies the phase a test fails
in, for easier analysis of failures.
* interp.c (sim_resume): New function from sim-resume.c, install
the stepping event after having processed the pending ticks.
(has_stepped): Likewise.
(sim_info): Produce an output only if verbose or STATE_VERBOSE_P.
pending interrupts.
* interrupts.c (interrupts_process): Keep track of the last number
of masked insn cycles.
(interrupts_initialize): Clear last number of masked insn cycles.
(interrupts_info): Report them.
(interrupts_update_pending): Compute clear and set masks of
interrupts and clear the interrupt bits before setting them
(due to SCI interrupt sharing).
* interrupts.h (struct interrupts): New members last_mask_cycles
and xirq_last_mask_cycles.
2001-04-18 matthew green <mrg@redhat.com>
* armcopro.c (write_cp15_reg): Set CHANGEMODE if endianness changes.
(read_cp15_reg): Make non-static.
(XScale_cp15_LDC): Update for write_cp15_reg() change.
(XScale_cp15_MCR): Likewise.
(XScale_cp15_write_reg): Likewise.
(XScale_check_memacc): New function. Check for breakpoints being
activated by memory accesses. Does not support the Branch Target
Buffer.
(XScale_set_fsr_far): New function. Set FSR and FAR for XScale.
(XScale_debug_moe): New function. Set the debug Method Of Entry,
if configured.
(write_cp14_reg): Reset count counter if requested.
* armdefs.h (struct ARMul_State): New members `LastTime' and
`CP14R0_CCD' used for the timer/counters.
(ARMul_CP13_R0_FIQ, ARMul_CP13_R0_IRQ, ARMul_CP13_R8_PMUS,
ARMul_CP14_R0_ENABLE, ARMul_CP14_R0_CLKRST, ARMul_CP14_R0_CCD,
ARMul_CP14_R0_INTEN0, ARMul_CP14_R0_INTEN1, ARMul_CP14_R0_INTEN2,
ARMul_CP14_R0_FLAG0, ARMul_CP14_R0_FLAG1, ARMul_CP14_R0_FLAG2,
ARMul_CP14_R10_MOE_IB, ARMul_CP14_R10_MOE_DB, ARMul_CP14_R10_MOE_BT,
ARMul_CP15_R1_ENDIAN, ARMul_CP15_R1_ALIGN, ARMul_CP15_R5_X,
ARMul_CP15_R5_ST_ALIGN, ARMul_CP15_R5_IMPRE, ARMul_CP15_R5_MMU_EXCPT,
ARMul_CP15_DBCON_M, ARMul_CP15_DBCON_E1, ARMul_CP15_DBCON_E0): New
defines for XScale registers.
(XScale_check_memacc, XScale_set_fsr_far, XScale_debug_moe): Prototype.
(ARMul_Emulate32, ARMul_Emulate26): Clean up function definition.
(ARMul_Emulate32): Handle the clock counter and hardware instruction
breakpoints. Call XScale_set_fsr_far() for software breakpoints and
software interrupts.
(LoadMult): Call XScale_set_fsr_far() for data aborts.
(LoadSMult): Likewise.
(StoreMult): Likewise.
(StoreSMult): Likewise.
* armemu.h (write_cp15_reg): Update prototype.
* arminit.c (ARMul_NewState): Initialise CP14R0_CCD and LastTime.
(ARMul_Abort): If XScale, check for FIQ and IRQ being enabled in CP13
register 0.
* armvirt.c (GetWord): Call XScale_check_memacc().
(PutWord): Likewise.
PENDING_FILL. Use PENDING_SCHED directly to handle the pending
set of the FCSR.
* sim-main.h (COCIDX): Remove definition; this isn't supported by
PENDING_FILL, and you can get the intended effect gracefully by
calling PENDING_SCHED directly.
2001-03-16 Frank Ch. Eigler <fche@redhat.com>
Add support for mmap-based memory regions.
* sim-memopt.c (mmap_next_fd): New global.
(sim_memory_init): Reinitialize it.
(OPTION_MEMORY_MAPFILE, memory_option_handler): Support new
"--memory-mapfile FILE" option. Check for some errors.
(do_memopt_add): Conditionally do mmap instead of malloc for
backing store of simulated memory. Check for more errors.
(do_simopt_delete, sim_memory_uninstall): Corresponding cleanup.
* sim-memopt.h (munmap_length): New member of _sim_memopt.
* configure.in: Look for mmap/fstat related functions and headers.
* config.in, configure: Regenerated.
2001-02-09 Ben Elliston <bje@redhat.com>
* (profile_print_pc): Write header out in target byte order.
2001-02-09 Ben Elliston <bje@redhat.com>
* sim-profile.c (profile_pc_init): Correct bug in loop logic when
adjusting the pc shift value.
later inspection by the trap handler.
(count_argc): New function.
(prog_argv): Declare static.
(sim_write): Declare.
(trap): Implement argc, argnlen and argn system calls. Do not
abort on unknown system calls--simply return -1.
* syscall.h (SYS_argc, SYS_argnlen, SYS_argn): Define.
[common/ChangeLog]
2001-01-12 Chris Demetriou <cgd@sibyte.com>
* aclocal.m4 (SIM_AC_OPTION_SCACHE): Properly
handle the case where a numeric value is supplied.
[eg. m32r/ChangeLog]
2001-01-12 Frank Ch. Eigler <fche@redhat.com>
* configure: Regenerated with sim_scache fix.
* sim-fpu.h (sim_fpu_printn_fpu): Declare.
* sim-fpu.c (print_bits): Add digits parameter. Print only as many
trailing digits as specified (-1 to print all digits).
(sim_fpu_print_fpu): New wrapper around sim_fpu_printn_fpu.
(sim_fpu_printn_fpu): Rename from sim_fpu_print_fpu; update calls
to print_bits ().
* sim-endian.h: Don't have parameters on macro definitions which
are simply renaming functions, to permit use of XCONCAT2 in both
the macro name and the arguments in a use of such a definition.
In sim/ppc:
* sim-endian.h: Don't have parameters on macro definitions which
are simply renaming functions, to permit use of XCONCAT2 in both
the macro name and the arguments in a use of such a definition.
* lib/sim-defs.exp (run_sm_test): Correct comment. "output" and
"xerror" options do not use a list of machines. Clear options from
previous test case. Use "$cpu_option" to identify the machine to the
assembler, if specified.
* cgen.sh: Handle an isa argument between cpu and mach. Default to
`all'. Pass `-i' options to cgen applications.
* Make-common.in (cgen-arch, cgen-cpu, cgen-decode, cgen-cpu-decode,
cgen-desc): Pass $(isa) to cgen.sh.
2000-10-19 Frank Ch. Eigler <fche@redhat.com>
On advice from Chris G. Demetriou <cgd@sibyte.com>:
* sim-main.h (GPR_CLEAR): Remove unused alternative macro.
* dv-m68hc11tim.c (cycle_to_string): New function to translate
the cpu cycle into some formatted time string.
(m68hc11tim_print_timer): Use it.
* dv-m68hc11sio.c (m68hc11sio_info): Use cycle_to_string.
* dv-m68hc11spi.c (m68hc11spi_info): Likewise.
* interrupts.c (interrupts_info): Likewise.
* m68hc11_sim.c (cpu_info): Likewise.
* sim-profile.h (PROFILE_DATA): Add cpu_freq.
(PROFILE_CPU_FREQ): New macro.
* sim-profile.c (OPTION_PROFILE_CPU_FREQUENCY): New enumerator.
(profile-options): Add profile-cpu-frequency.
(parse_frequency): New function.
(profile_option_handler): Handle OPTION_PROFILE_CPU_FREQUENCY.
(profile_print_speed): Print cpu frequency and simulated execution time.
Re-indent other items to match.
(movm): Initialize PC and mask.
(mov, movbu, movhu): Set srcreg2 from RI0.
(bsch): Initialize c.
(sat16_cmp): Actually do the comparison.
(mov_llt): Do not overwrite dstreg with uninitialized variable.
* sim-events.c (sim_events_remain_time): New function returning
the time that remains before the event is raised.
* hw-events.c (hw_event_remain_time): Likewise.
* sim-events.h (sim_events_remain_time): Declare.
* hw-events.h (hw_event_remain_time): Declare.
* sim-hw.c: Use <errno.h> instead of <sys/errno.h>
(OPTION_HW_LIST): New option --hw-list to list the devices.
(hw_option_handler): List the device tree with 'sim_hw_print'.
* sim-bits.h (_MSB_16, _LSB_16): Define for 16-bit targets.
(MASK, LSBIT, MSBIT): Likewise and use _MSB_16 and _LSB_16.
(EXTENDED): Define for 16-bit word size.
* sim-bits.c (LSEXTRACTED, MSEXTRACTED, LSINSERTED,
MSINSERTED, LSSEXT, MSSEXT): Implement for 16-bit word size.
* sim-types.h: Added support for 16-bit targets.
(ARM_Strong_Prop, STRONGARM): Define.
* arminit.c (ARMul_NewState): Reset is_StrongARM.
(ARMul_SelectProcessor): Set is_StrongARM.
* wrapper.c (sim_create_inferior): Use bfd machine type to
determine processor type to emulate.
* armemu.h (BUSUSEDINCPCS, BUSUSEDINCPCN): Don't increment PC
when emulating StrongARM.
(SET_ABORT): Save CPSR in SPSR and set LR.
* armemu.c (ARMul_Emulate, isize): Set to INSN_SIZE.
(WriteR15, WriteSR15): Do not discard bit 1 in Thumb mode.
* arminit.c (ARMul_Abort): Use new SETABORT and INSN_SIZE.
* armemu.c (ARMul_Emulate26, bl): Use WriteR15Branch() to
modify PC. Moved the existing logic...
(WriteR15Branch): ... here. New function.
(WriteR15, WriteSR15): Drop the two least significant bits.
(LoadSMult): Use WriteR15Branch() to modify PC.
(LoadMult): Use WRITEDESTB() instead of WRITEDEST().
* armsupp.c (ARMul_CPSRAltered): Zero out bits as they're
extracted from state->Cpsr, but preserve the unused bits.
(ARMul_GetCPSR): Get bits preserved in state->Cpsr.
(ARMul_GetSPSR, ARMul_FixCPSR): Use ARMul_GetCPSR() to
get the full CPSR word.
(SETPSR_F, SETPSR_S, SETPSR_X, SETPSR_C): New macros.
(SETPSR, SET_INTMODE, SETCC): Removed.
* armsupp.c (ARMul_FixCPSR, ARMul_FixSPSR): Do not test bit
mask. Use SETPSR_* to modify PSR.
(ARMul_SetCPSR): Load all bits from value.
* armemu.c (ARMul_Emulate, msr): Do not test bit mask.
2000-06-20 Frank Ch. Eigler <fche@redhat.com>
* compile.c: Don't include "wait.h".
(sim_resume): Use local SIM_WIFEXITED and SIM_WIFSIGNALED macros
instead of WIF* from host.
* Makefile.in (interp.o): Depends on ppi.c .
(ppi.c): New rule.
* gencode.c (printonmatch, think, genopc): Deleted.
(MAX_NR_STUFF): Now 42.
(tab): Add SH-DSP CPU instructions.
Amalgamate ldc / stc / lds / sts instructions with similar
bit patterns. Fix opcodes of stc Rm_BANK,@-<REG_N>.
Fix semantics of lds.l @<REG_N>+,MACH (no sign extend).
(movsxy_tab): New array.
For movs, change MMMM field to GGGG, and mmmm field to MMMM.
Added entries for movx, movy and parallel processing insns.
(ppi_tab): New array.
(qfunc): Stabilize sort.
(expand_opcode): Handle [01][01]NN, [01][01]xx and [01][01]yy.
Handle 'M', 'G' 's' 'X', 'a', 'Y' and 'A'.
(dumptable): Now takes three arguments. Changed all callers.
Emit just one contigous jump table.
(filltable): Now takes an argument. Changed all callers.
Make index static.
(ppi_moves, expand_ppi_code, ppi_filltable, ppi_gensim): New functions.
(gensim_caselist): New function, broken out of gensim.
Handle opcode fields 'x', 'y', 's', 'M', 'G', 'X', 'a', and 'Y'.
Handle ref '9'.
(gensim): Handle 'N' in code field and '8' in refs field.
Call gensim_caselist - twice.
(ppi_index): New static variable.
(main): Unsupport default action.
Add dsp support for -x / -s option. Add -p option.
* interp.c (sh_jump_table, sh_dsp_table, ppi_table): Declare.
(saved_state_type): Rearrange to allow amalgamated ldc / stc /
lds / sts to work efficiently.
(target_dsp): New static variable.
(GBR, VBR, SSR, SPC, MACH, MACL): Reflect saved_state_type change.
(FPUL, Rn_BANK, SET_Rn_BANK, M, Q, S, T, SR_BL, SR_RB): Likewise.
(SR_MD, SR_RC, SET_SR_BIT, GET_SR, SET_RC, GET_FPSCR): Likewise.
(RS, RE, MOD, MOD_ME, DSP_R): Likewise.
(set_fpscr1): Likewise. Use target_dsp to check for dsp.
(MOD_MSi, SIG_BUS_FETCH): Deleted.
(CREG, SREG, PR, SR_MASK_DMY, SR_MASK_DMX, SR_DMY): New macros.
(SR_DMX, DSR, MOD_DELTA, GET_DSP_GRD): Likewise.
(SET_MOD): Reflect saved_state_type change. Set MOD_DELTA instead
of MOD_MS, and encode SR_DMY / SR_DMX into high word of MOD_ME.
(set_sr): Reflect saved_state_type change. Fix SR_RB handling.
Use SET_MOD.
(MA, L, TL, TB): Now controlled by ACE_FAST.
(SEXT32): Just cast to int.
(SIGN32): Fixed to only shift by 31.
(CHECK_INSN_PTR): SIGBUS at insn fetch now represented by insn_end 0.
(ppi_insn): Declare.
(ppi.c): Include.
(init_dsp): Set target_dsp. When it changes, switch end of
sh_jump_table with sh_dsp_table.
(sim_resume) Don't declare sh_jump_table0. Use sh_jump_table instead.
Don't Declare PR if it's #defined.
Fix single-stepping (Was broken in Mar 6 16:59:10 patch).
(sim_store_register, sim_read_register): Translate accesses to
reflect saved_state_type change.
* interp.c (set_sr): Set sr.
(SET_RC, MOD, MOD_MS, MOD_ME, SET_MOD, MOD_MS, MOD_ME): New macros.
(set_fpscr1): Don't bank-switch fpu registers when simulating sh-dsp.
(DSP_R): Fix definition.
(sim_resume): Remove outdated SET_SR use.
* interp.c (saved_state): New members for struct member asregs:
rs, re, insn_end, xram_start, yram_start.
(struct loop_bounds): New struct.
(SKIP_INSN): New macro.
(get_loop_bounds): New function.
(endianw): Renamed to global_endianw.
(maskw): negated bits.
(PC): Now insn_ptr.
(SR_MASK_RC, SR_RC_INCREMENT, SR_RC, RAISE_EXCEPTION): New macros.
(RS, RE, DSP_R, DSP_GRD, A1, A0, X0, X1, Y0, Y1, M0, A1G): Likewise.
(M1, A0G, RIAT, PT2H, PH2T, SET_NIP, CHECK_INSN_PTR): Likewise.
(SIG_BUS_FETCH): Likewise
(raise_exception, riat_fast): New functions.
(raise_buserror, sim_stop): Use raise_exception.
(PROCESS_SPECIAL_ADDRESS): Use xram_start / yram_start.
(BUSERROR, WRITE_BUSERROR, READ_BUSERROR):
Reverse sense of mask argument.
(FP_OP, set_dr): Use RAISE_EXCEPTION.
(wlat_fast, wwat_fast, wbat_fast, rlat_fast, rwat_fast, rbat_fast):
Declare. Remove redundant masking.
(wwat_fast, rwat_fast): Add argument endianw. Changed callers.
(MA): Updated for change pc -> PC.
(Delay_Slot): Use RIAT.
(empty): Deleted.
(trap): Remove argument little_endian. Add argument endianw.
Changed all callers. Use raise_exception.
(macw): Add argument endainw. Changed all callers.
(init_dsp): New function, extended after broken out of init_pointers.
(sim_resume): Replace pc with insn_ptr. Replace little_endian with
endianw. Replace nia with nip. Reverse sense of maskb / maskw /
maskl. Implement logic for zero-overhead loops. Don't try to
interpret garbage when getting a SIGBUS at insn fetch.
(sim_open): Call init_dsp.
* gencode.c (tab): Use SET_NIP instead of nia = . Use PH2T / PT2H /
RAISE_EXCEPTION where appropriate.
Add extra cycles for brai, braf , bsr, bsrf, jmp, jsr.
* interp.c (sim_store_register, sim_fetch_register):
Do proper endianness switch.
* interp.c (saved_state_type): New members for struct member asregs:
xymem_select, xmem, ymem, xmem_offset, ymem_offset.
(special_address): Delete.
(BUSERROR): Now a two-argument predicate.
(PROCESS_SPECIAL_ADDRESS, WRITE_BUSERROR, READ_BUSERROR): New macros.
(wlat_little, wwat_little, wbat_any, wlat_big, wwat_big): Delete.
(process_wlat_addr, process_wwat_addr): New functions.
(process_wbat_addr, process_rlat_addr, process_rwat_addr): Likewise.
(process_rbat_addr): Likewise.
(wlat_fast, wwat_fast, wbat_fast): Use WRITE_BUSERROR.
(rlat_little, rwat_little, rbat_any, rlat_big, rwat_big): Delete.
(rlat_fast, rwat_fast, rbat_fast): Use READ_BUSERROR.
(RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Delete SLOW versions.
(do_rdat, trap): Delete SLOW code.
(SEXT32, SIGN32): New macros.
(swap, swap16): Now integer in - integer out. Changed all callers.
(strswaplen, strnswap): Delete SLOW versions.
(init_pointers): Initialize dsp memory selection (preliminary).
(sim_store_register, sim_fetch_register): Use swap instead of
big / little endian read / write functions.
* interp.c (maskl): Deleted.
(endianw, endianb): New variables.
(special_address): Now inline.
(bp_holder): Put raising of buserror there, rename to:
(raise_buserror).
(BUSERROR): Now yields a value. Changed all users.
(wbat_big): Delete.
(wlat_fast, wwat_fast, wbat_fast): New functions.
(rlat_fast, rwat_fast, rbat_fast): Likewise.
(RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Use new functions.
(do_rdat, do_wdat): Likewise. Take maskl argument instead of
little_endian one. Changed caller macros.
(swap, swap16): Use w[rw]lat_big / w[rw]lat_little directly.
(strswaplen, strnswap): New functions.
(trap): Use them to fix up endian mismatches;
disable SYS_execve and SYS_execv; fix double address translation for
SYS_pipe and SYS_stat.
(sym_write, sym_read): Add endianness translation.
(sym_store_register, sym_fetch_register): Add maskl local variable.
(sim_open): Set endianw and endianb.
genericXor, genericBtst): Use `unsigned32'.
* op_utils.c: Likewise.
* mn10300.igen, am33.igen: Use `unsigned32', `signed32',
`unsigned64' or `signed64' where type width is relevant.
sim:
* Makefile.in (interp.o): Depends on ppi.c .
(ppi.c): New rule.
* gencode.c (printonmatch, think, genopc): Deleted.
(MAX_NR_STUFF): Now 42.
(tab): Add SH-DSP CPU instructions.
Amalgamate ldc / stc / lds / sts instructions with similar
bit patterns. Fix opcodes of stc Rm_BANK,@-<REG_N>.
Fix semantics of lds.l @<REG_N>+,MACH (no sign extend).
(movsxy_tab): New array.
For movs, change MMMM field to GGGG, and mmmm field to MMMM.
Added entries for movx, movy and parallel processing insns.
(ppi_tab): New array.
(qfunc): Stabilize sort.
(expand_opcode): Handle [01][01]NN, [01][01]xx and [01][01]yy.
Handle 'M', 'G' 's' 'X', 'a', 'Y' and 'A'.
(dumptable): Now takes three arguments. Changed all callers.
Emit just one contigous jump table.
(filltable): Now takes an argument. Changed all callers.
Make index static.
(ppi_moves, expand_ppi_code, ppi_filltable, ppi_gensim): New functions.
(gensim_caselist): New function, broken out of gensim.
Handle opcode fields 'x', 'y', 's', 'M', 'G', 'X', 'a', and 'Y'.
Handle ref '9'.
(gensim): Handle 'N' in code field and '8' in refs field.
Call gensim_caselist - twice.
(ppi_index): New static variable.
(main): Unsupport default action.
Add dsp support for -x / -s option. Add -p option.
* interp.c (sh_jump_table, sh_dsp_table, ppi_table): Declare.
(saved_state_type): Rearrange to allow amalgamated ldc / stc /
lds / sts to work efficiently.
(target_dsp): New static variable.
(GBR, VBR, SSR, SPC, MACH, MACL): Reflect saved_state_type change.
(FPUL, Rn_BANK, SET_Rn_BANK, M, Q, S, T, SR_BL, SR_RB): Likewise.
(SR_MD, SR_RC, SET_SR_BIT, GET_SR, SET_RC, GET_FPSCR): Likewise.
(RS, RE, MOD, MOD_ME, DSP_R): Likewise.
(set_fpscr1): Likewise. Use target_dsp to check for dsp.
(MOD_MSi, SIG_BUS_FETCH): Deleted.
(CREG, SREG, PR, SR_MASK_DMY, SR_MASK_DMX, SR_DMY): New macros.
(SR_DMX, DSR, MOD_DELTA, GET_DSP_GRD): Likewise.
(SET_MOD): Reflect saved_state_type change. Set MOD_DELTA instead
of MOD_MS, and encode SR_DMY / SR_DMX into high word of MOD_ME.
(set_sr): Reflect saved_state_type change. Fix SR_RB handling.
Use SET_MOD.
(MA, L, TL, TB): Now controlled by ACE_FAST.
(SEXT32): Just cast to int.
(SIGN32): Fixed to only shift by 31.
(CHECK_INSN_PTR): SIGBUS at insn fetch now represented by insn_end 0.
(ppi_insn): Declare.
(ppi.c): Include.
(init_dsp): Set target_dsp. When it changes, switch end of
sh_jump_table with sh_dsp_table.
(sim_resume) Don't declare sh_jump_table0. Use sh_jump_table instead.
Don't Declare PR if it's #defined.
Fix single-stepping (Was broken in Mar 6 16:59:10 patch).
(sim_store_register, sim_read_register): Translate accesses to
reflect saved_state_type change.
* interp.c (set_sr): Set sr.
(SET_RC, MOD, MOD_MS, MOD_ME, SET_MOD, MOD_MS, MOD_ME): New macros.
(set_fpscr1): Don't bank-switch fpu registers when simulating sh-dsp.
(DSP_R): Fix definition.
(sim_resume): Remove outdated SET_SR use.
* interp.c (saved_state): New members for struct member asregs:
rs, re, insn_end, xram_start, yram_start.
(struct loop_bounds): New struct.
(SKIP_INSN): New macro.
(get_loop_bounds): New function.
(endianw): Renamed to global_endianw.
(maskw): negated bits.
(PC): Now insn_ptr.
(SR_MASK_RC, SR_RC_INCREMENT, SR_RC, RAISE_EXCEPTION): New macros.
(RS, RE, DSP_R, DSP_GRD, A1, A0, X0, X1, Y0, Y1, M0, A1G): Likewise.
(M1, A0G, RIAT, PT2H, PH2T, SET_NIP, CHECK_INSN_PTR): Likewise.
(SIG_BUS_FETCH): Likewise
(raise_exception, riat_fast): New functions.
(raise_buserror, sim_stop): Use raise_exception.
(PROCESS_SPECIAL_ADDRESS): Use xram_start / yram_start.
(BUSERROR, WRITE_BUSERROR, READ_BUSERROR):
Reverse sense of mask argument.
(FP_OP, set_dr): Use RAISE_EXCEPTION.
(wlat_fast, wwat_fast, wbat_fast, rlat_fast, rwat_fast, rbat_fast):
Declare. Remove redundant masking.
(wwat_fast, rwat_fast): Add argument endianw. Changed callers.
(MA): Updated for change pc -> PC.
(Delay_Slot): Use RIAT.
(empty): Deleted.
(trap): Remove argument little_endian. Add argument endianw.
Changed all callers. Use raise_exception.
(macw): Add argument endainw. Changed all callers.
(init_dsp): New function, extended after broken out of init_pointers.
(sim_resume): Replace pc with insn_ptr. Replace little_endian with
endianw. Replace nia with nip. Reverse sense of maskb / maskw /
maskl. Implement logic for zero-overhead loops. Don't try to
interpret garbage when getting a SIGBUS at insn fetch.
(sim_open): Call init_dsp.
* gencode.c (tab): Use SET_NIP instead of nia = . Use PH2T / PT2H /
RAISE_EXCEPTION where appropriate.
Add extra cycles for brai, braf , bsr, bsrf, jmp, jsr.
* interp.c (sim_store_register, sim_fetch_register):
Do proper endianness switch.
* interp.c (saved_state_type): New members for struct member asregs:
xymem_select, xmem, ymem, xmem_offset, ymem_offset.
(special_address): Delete.
(BUSERROR): Now a two-argument predicate.
(PROCESS_SPECIAL_ADDRESS, WRITE_BUSERROR, READ_BUSERROR): New macros.
(wlat_little, wwat_little, wbat_any, wlat_big, wwat_big): Delete.
(process_wlat_addr, process_wwat_addr): New functions.
(process_wbat_addr, process_rlat_addr, process_rwat_addr): Likewise.
(process_rbat_addr): Likewise.
(wlat_fast, wwat_fast, wbat_fast): Use WRITE_BUSERROR.
(rlat_little, rwat_little, rbat_any, rlat_big, rwat_big): Delete.
(rlat_fast, rwat_fast, rbat_fast): Use READ_BUSERROR.
(RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Delete SLOW versions.
(do_rdat, trap): Delete SLOW code.
(SEXT32, SIGN32): New macros.
(swap, swap16): Now integer in - integer out. Changed all callers.
(strswaplen, strnswap): Delete SLOW versions.
(init_pointers): Initialize dsp memory selection (preliminary).
(sim_store_register, sim_fetch_register): Use swap instead of
big / little endian read / write functions.
* interp.c (maskl): Deleted.
(endianw, endianb): New variables.
(special_address): Now inline.
(bp_holder): Put raising of buserror there, rename to:
(raise_buserror).
(BUSERROR): Now yields a value. Changed all users.
(wbat_big): Delete.
(wlat_fast, wwat_fast, wbat_fast): New functions.
(rlat_fast, rwat_fast, rbat_fast): Likewise.
(RWAT, RLAT, RBAT, WWAT, WLAT, WBAT): Use new functions.
(do_rdat, do_wdat): Likewise. Take maskl argument instead of
little_endian one. Changed caller macros.
(swap, swap16): Use w[rw]lat_big / w[rw]lat_little directly.
(strswaplen, strnswap): New functions.
(trap): Use them to fix up endian mismatches;
disable SYS_execve and SYS_execv; fix double address translation for
SYS_pipe and SYS_stat.
(sym_write, sym_read): Add endianness translation.
(sym_store_register, sym_fetch_register): Add maskl local variable.
(sim_open): Set endianw and endianb.
gdb:
* sh-tdep.c (sh_dsp_reg_names, sh3_dsp_reg_names): New arrays.
(sh_processor_type_table): Add entries for bfd_mach_sh_dsp and
bfd_mach_sh3_dsp.
(sh_show_regs): Floating point registers are called fr0-fr15.
For sh4, display fpul, fpscr and fr0-fr15 / dr0-dr14 as appropriate.
Handle sh-dsp and sh3-dsp.
config/sh/tm-sh.h (REGISTER_VIRTUAL_TYPE): sh-dsp / sh3-dsp
don't have floating point registers.
(DSR_REGNUM, A0G_REGNUM, A0_REGNUM, A1G_REGNUM, A1_REGNUM): Define.
(M0_REGNUM, M1_REGNUM, X0_REGNUM, X1_REGNUM, Y0_REGNUM): Likewise.
(Y1_REGNUM, MOD_REGNUM, RS_REGNUM, RE_REGNUM, R0B_REGNUM): Likewise.
2000-04-14 Gary Thomas <gthomas@redhat.com>
* v850.igen: Define 'br *' as illegal since this is the only
way to provide a breakpoint on some v850 family processors.
2000-03-11 Philip Blundell <philb@gnu.org>
* armemu.c (LoadSMult, LoadMult): Correct handling of aborts.
Patch from Allan Skillman <Allan.Skillman@arm.com>.
* cgen-fpu.h: Rename extsfdf to fextsfdf. Rename truncdfsf to
ftruncdfsf.
* cgen-accfp.c (fextsfdf): New function.
(ftruncdfsf): New function.
(cgen_init_accurate_fpu): Initialize fextsfdf and ftruncdfsf.
2000-03-08 Dave Brolley <brolley@redhat.com>
* cgen-par.h (cgen_write_queue_kind): Add CGEN_FN_SF_WRITE.
(CGEN_WRITE_QUEUE_ELEMENT): Add fn_sf_write.
(sim_queue_fn_si_write): Last argument is has type USI.
(sim_queue_fn_sf_write): New function.
* cgen-par.c (sim_queue_fn_si_write): Declare 'value' as USI.
(sim_queue_fn_sf_write): New function.
(cgen_write_queue_element_execute): Handle CGEN_FN_SF_WRITE.
* merge from internal repo -> sourceware
2000-03-02 Frank Ch. Eigler <fche@redhat.com>
* configure: Regenerated.
Tue Feb 8 18:35:01 2000 Donald Lindsay <dlindsay@hound.cygnus.com>
* interp.c, mips.igen: all 5 DEADC0DE situations now have sim_io_eprintf
calls, conditional on the simulator being in verbose mode.
instead of sim_trace() to run the program; include support for ``-o''
option (operating environment); when a signal occurs, only continue
execution when operating environment mode.
Update d10v.
* sparc-desc.h: New file.
* sparc-opc.h: New file.
* decode64.c: New file.
* decode64.h: New file.
* sem64.c: New file.
* cpu64.c: New file.
* cpu64.h: New file.
* model64.h: New file.
* mloop64.in: New file.
* regs64.h: New file.
* trap64.c: New file.
* cpu32.h,decode32.c,decode32.h,model32.c,sem32.c: Rebuild.
1999-02-05 Frank Ch. Eigler <fche@cygnus.com>
* dv-tx3904sio.c (tx3904sio_tickle): After a polled I/O from the
CPU, start periodic background I/O polls.
(tx3904sio_poll): New function: periodic I/O poller.
(PROFILE_USEFUL_MASK): New macro.
* sim-profile.c (profile_options): Make like trace_options, allow
optional on|off arg where applicable.
(set_profile_option_mask): New function.
(sim_profile_set_option): New function.
(profile_option_handler): Simplify.
Have -p only enable selected things, not everything.
Add missing break to OPTION_PROFILE_PC_RANGE.
* cgen-scache.c (scache_options): Allow optional on|off arg to
--profile-scache.
(scache_option_handler): Use sim_profile_set_option.
for internal PR 18869 and 18870.
1999-01-26 Frank Ch. Eigler <fche@cygnus.com>
* sim-memopt.c (memory_options): Add MEMORY_FILL option.
(memory_option_handler): Implement MEMORY_FILL option. Make
MEMORY_CLEAR an alias for MEMORY_FILL=0.
(parse_ulong_value): New function.
(do_memopt_add): Allocate all buffers. Optionally fill them.
(CGEN_MAIN_SCM): Add rtx-funcs.scm.
(cgen-arch): Pass $(mach) to cgen.sh.
* cgen-engine.h (SEM_BRANCH_FINI): New arg pcvar, all uses updated.
(SEM_BRANCH_INIT_EXTRACT): New macro.
(SEM_BRANCH_INIT): Add taken_p.
(TARGET_SEM_BRANCH_FINI): Provide default definition.
(SEM_BRANCH_FINI): Use it.
(SEM_INSN): Update.
* cgen-run.c (sim_resume): Handle tracing of last insn.
* cgen-scache.h (WITH_SCACHE): Define as 0 if not defined.
* cgen-trace.c (current_abuf): New static global.
(trace_insn_init): Initialize it.
(trace_insn_fini): Use it.
(trace_insn): Set it.
* cgen.sh (arch case): Pass -m ${mach} to cgen.
* genmloop.sh (@cpu@_emit_before): Only define if WITH_SCACHE_PBB.
(@cpu@_emit_after): Ditto.
(simple @cpu@_engine_run_full): New local `pc'. Initialize semantic
labels if WITH_SEM_SWITCH_FULL.
* sim-model.c: Include bfd.h.
(sim_model_init): New function.
(sim_model_install): Record init fn.
* sim-model.h (MACH): New member bfd_name.
* sim-module.c (modules): Initialize model before scache.
[ChangeLog]
1998-12-30 Frank Ch. Eigler <fche@cygnus.com>
* mips.igen (BREAK): Call signal_exception instead of sim_engine_halt.
start-sanitize-sky
* interp.c (signal_exception): Call SIM_CPU_EXCEPTION_TRIGGER hook.
Call sim_engine_halt on BreakPoint.
end-sanitize-sky
[ChangeLog.sky]
1998-12-30 Frank Ch. Eigler <fche@cygnus.com>
* sky-gdb.c (sky_sim_engine_halt): Do not set CIA here.
1998-12-29 Frank Ch. Eigler <fche@cygnus.com>
* interp.c (sim_open): Allocate jm3904 memory in smaller chunks.
(load_word): Call SIM_CORE_SIGNAL hook on error.
(signal_exception): Call SIM_CPU_EXCEPTION_TRIGGER hook before
starting. For exception dispatching, pass PC instead of NULL_CIA.
(decode_coproc): Use COP0_BADVADDR to store faulting address.
* sim-main.h (COP0_BADVADDR): Define.
(SIM_CORE_SIGNAL): Define hook to call mips_core_signal.
(SIM_CPU_EXCEPTION*): Define hooks to call mips_cpu_exception*().
(_sim_cpu): Add exc_* fields to store register value snapshots.
* mips.igen (*): Replace memory-related SignalException* calls
with references to SIM_CORE_SIGNAL hook.
* dv-tx3904irc.c (tx3904irc_port_event): printf format warning
fix.
* sim-main.c (*): Minor warning cleanups.
1998-12-29 Frank Ch. Eigler <fche@cygnus.com>
* Makefile.in (WITH_COMMON_OBJS): Build also dv-sockser.o.
* interp.c (sim_open): Add stub mn103002 cache control memory regions.
Set OPERATING_ENVIRONMENT on "stdeval1" board.
(mn10300_core_signal): New function to intercept memory errors.
(program_interrupt): New function to dispatch to exception vector
(mn10300_exception_*): New functions to snapshot pre/post exception
state.
* sim-main.h (SIM_CORE_SIGNAL): Define hook - call mn10300_core_signal.
(SIM_ENGINE_HALT_HOOK): Do nothing.
(SIM_CPU_EXCEPTION*): Define hooks to call mn10300_cpu_exception*().
(_sim_cpu): Add exc_* fields to store register value snapshots.
* dv-mn103ser.c (*): Support dv-sockser backend for UART I/O.
Various endianness and warning fixes.
* mn10300.igen (illegal): Call program_interrupt on error.
(break): Call program_interrupt on breakpoint
Several changes from <janczyn@cygnus.com> and <cagney@cygnus.com>
merged in:
* dv-mn103int.c (mn103int_ioctl): New function for NMI
generation. (mn103int_finish): Install it as ioctl handler.
* dv-mn103tim.c: Support timer 6 specially. Endianness fixes.
1998-12-24 Frank Ch. Eigler <fche@cygnus.com>
* dv-sockser.c (DEFAULT_TIMEOUT): Increase to 1 ms.
* nrun.c (main): Remain in simulation loop for traps and
exceptions when in operating environment mode.
(ui_loop_hook): New stub hook for standalone use.
* sim-events.c (sim_events_process): Call ui_loop_hook
periodically on CYGWIN host.
* sim-reason.c (sim_stop_reason): Return host signal numbers
to gdb on sim_stopped and sim_signalled cases.
* sim-engine.c (sim_engine_halt): Call SIM_CPU_EXCEPTION_SUSPEND
hook just before longjmp.
* sim-resume.c (sim_resume): Call SIM_CPU_EXCEPTION_RESUME
hook just before sim_engine_run.
* sim-n-core.h (sim_core_trace_M): Allay const warning.
* sim-trace.h (trace_generic): Ditto.
* sim-trace.c (trace_generic): Ditto.
* sim/fr30/ldres.cgs: New testcase.
* sim/fr30/stres.cgs: New testcase.
* sim/fr30/copop.cgs: New testcase.
* sim/fr30/copld.cgs: New testcase.
* sim/fr30/copst.cgs: New testcase.
* sim/fr30/copsv.cgs: New testcase.
* sim/fr30/nop.cgs: New testcase.
* sim/fr30/andccr.cgs: New testcase.
* sim/fr30/orccr.cgs: New testcase.
* sim/fr30/addsp.cgs: New testcase.
* sim/fr30/stilm.cgs: New testcase.
* sim/fr30/extsb.cgs: New testcase.
* sim/fr30/extub.cgs: New testcase.
* sim/fr30/extsh.cgs: New testcase.
* sim/fr30/extuh.cgs: New testcase.
* sim/fr30/enter.cgs: New testcase.
* sim/fr30/leave.cgs: New testcase.
* sim/fr30/xchb.cgs: New testcase.
* sim/fr30/dmovb.cgs: New testcase.
* sim/fr30/dmov.cgs: New testcase.
* sim/fr30/dmovh.cgs: New testcase.
* sim/fr30/testutils.inc (take_branch{_d},no_branch{_d}): New macros.
* sim/fr30/ret.cgs: Add tests fir ret:d.
* sim/fr30/inte.cgs: New testcase.
* sim/fr30/reti.cgs: New testcase.
* sim/fr30/bra.cgs: New testcase.
* sim/fr30/bno.cgs: New testcase.
* sim/fr30/beq.cgs: New testcase.
* sim/fr30/bne.cgs: New testcase.
* sim/fr30/bc.cgs: New testcase.
* sim/fr30/bnc.cgs: New testcase.
* sim/fr30/bn.cgs: New testcase.
* sim/fr30/bp.cgs: New testcase.
* sim/fr30/bv.cgs: New testcase.
* sim/fr30/bnv.cgs: New testcase.
* sim/fr30/blt.cgs: New testcase.
* sim/fr30/bge.cgs: New testcase.
* sim/fr30/ble.cgs: New testcase.
* sim/fr30/bgt.cgs: New testcase.
* sim/fr30/bls.cgs: New testcase.
* sim/fr30/bhi.cgs: New testcase.
* sim/fr30/call.cgs: Test ret here as well.
* sim/fr30/ld.cgs: Remove bogus comment.
* sim/fr30/testutils.inc (save_rp,restore_rp): New macros.
* sim/fr30/div.ms: New testcase.
* sim/fr30/st.cgs: New testcase.
* sim/fr30/sth.cgs: New testcase.
* sim/fr30/stb.cgs: New testcase.
* sim/fr30/mov.cgs: New testcase.
* sim/fr30/jmp.cgs: New testcase.
* sim/fr30/ret.cgs: New testcase.
* sim/fr30/int.cgs: New testcase.
Set mips_fpu, and mips_fpu_bitsize.
Set sim_gen, and sim_igen_machine.
* configure: Rebuild.
* mips.igen (BC1): Renamed to BC1a and BC1b to avoid conflicts.
* sim-main.h (SizeFGR): Handle TARGET_ENABLE_FR.
* sim/fr30/div0s.cgs: New testcase.
* sim/fr30/div0u.cgs: New testcase.
* sim/fr30/div1.cgs: New testcase.
* sim/fr30/div2.cgs: New testcase.
* sim/fr30/div3.cgs: New testcase.
* sim/fr30/div4s.cgs: New testcase.
* sim/fr30/testutils.inc (mvi_h_dr,set_dbits,test_dbits): New Macros.
1998-12-10 Frank Ch. Eigler <fche@cygnus.com>
* dv-tx3904sio.c (tx3904sio_io_read_buffer): Endianness fixes.
(tx3904sio_tickle): fflush after a stdout character output.
* sim/fr30/testutils.inc (set_s_user): Correct Mask.
(set_s_system): Correct Mask.
* sim/fr30/ld.cgs (ld): Move previously failing test back
into place.
* sim/fr30/ldm0.cgs: New testcase.
* sim/fr30/ldm1.cgs: New testcase.
* sim/fr30/stm0.cgs: New testcase.
* sim/fr30/stm1.cgs: New testcase.
* configure: Regenerate.
* sim-main.h: Protect against multiple inclusion.
Don't include cgen-scache.h,cgen-cpu.h,cgen-trace.h,cpuall.h.
Done by cgen-sim.h now.
* tconfig.in (SIM_HAVE_MODEL): Delete, moved to cgen-types.h.
* cpuall.h: Regenerate.
* cpu.h,decode.c,sem-switch.c,sem.c: Regenerate.
* mloop.in (extract16): Make static inline again.
Simplify with call to @cpu@_fill_argbuf,@cpu@_fill_argbuf_tp.
(extract32): Ditto.
Simplify with call to @cpu@_fill_argbuf,@cpu@_fill_argbuf_tp.
(execute): Test ARGBUF_PROFILE_P before profiling.
Update calls to TRACE_INSN_INIT,TRACE_INSN_FINI.
* cpux.h,decodex.c,modelx.c,semx-switch.c: Regenerate.
* mloopx.in: Rewrite.
* cgen-sim.h: Simple header that includes others.
* sim-arange.c: New file.
* sim-arange.h: New file.
* sim-basics.h: Include it.
* Make-common.in (SIM_NEW_COMMON_OBJS): Add sim-arange.o.
(sim-arange.o): Add rule for.
* sim-cpu.h (sim_cpu_msg_prefix): Add prototype.
(sim_io_eprintf_cpu): Add prototype.
* sim-inline.h (HAVE_INLINE): Define if GNUC.
(INLINE2): New macro.
(EXTERN_INLINE): New macro.
* sim-module.c (sim_post_argv_init): Initialize cpu backlink
before calling module init fns.
* sim-profile.h (OPTION_PROFILE_*): Move into enum.
(profile_init): New function.
(profile_options): New option --profile-range.
(profile_option_handler): Handle --profile-range.
(profile_print_insn): Qualify address range specific section titles.
(profile_print_addr_ranges): New function.
(profile_info): Print address ranges if specified.
(profile_install): Set profile_init init fn.
* sim-profile.h (PROFILE_DATA): New member `range'.
* sim-trace.c (trace_init): New function.
(trace_options): New option --trace-range.
(trace_option_handler): Handle --trace-range.
(trace_install): Set trace_init init fn.
* sim-trace.h (TRACE_DATA): New member `range'.
* sim-utils.c (sim_cpu_msg_prefix): New function.
(sim_io_eprintf_cpu): New function.
* cgen-engine.h (PC_IN_TRACE_RANGE_P): New macro.
(PC_IN_PROFILE_RANGE_P): New macro.
* cgen-trace.c (trace_insn_init): Set current_insn to NULL.
(trace_insn_fini): New arg abuf. All callers updated.
Exit early if trace_insn not called. Check ARGBUF_PROFILE_P before
printing cycle counts.
* cgen-trace.h (trace_insn_fini): Update prototype.
(TRACE_RESULT_P): New macro.
(TRACE_INSN_INIT,TRACE_INSN_FINI): New arg abuf. All callers updated.
(TRACE_INSN): Check ARGBUF_TRACE_P.
(TRACE_EXTRACT,TRACE_RESULT): New arg abuf. All callers updated.
* cgen-types.h (SIM_INLINE): Delete.
(SIM_HAVE_MODEL,SIM_HAVE_ADDR_RANGE): Define.
* cgen-utils.c: Don't include cgen-engine.h
* genmloop.sh (@cpu@_fill_argbuf): New function.
(@cpu@_fill_argbuf_tp): New function.
(@cpu@_emit_before,@cpu@_emit_after): New functions.
(@cpu@_pbb_begin): Prefix cti_sc,insn_count with '_'.
(SET_CTI_VPC,SET_INSN_COUNT): Update.
(@cpu@_pbb_before): Check ARGBUF_PROFILE_P before calling
doing profiling. Update call to TRACE_INSN_INIT,TRACE_INSN_FINI.
(@cpu@_pbb_after): Check ARGBUF_PROFILE_P before calling
doing profiling. Update call to TRACE_INSN_FINI.
* sim/fr30/ld.cgs: Implement more loads.
* sim/fr30/call.cgs: New testcase.
* sim/fr30/testutils.inc (testr_h_dr): New macro.
(set_s_user,set_s_system): New macros.
[common/ChangeLog]
1998-12-01 Frank Ch. Eigler <fche@elastic.org>
* sim-gx-run.c (sim_engine_run): Use new tgx_info struct to
collect run-time arguments to gx block.
* sim-gx.h (sim_gx_function): Corresponding signature change.
* sim-gx.c (sim_gx_compiled_block_f): Remove nonfunctional code to
again compile a gx block source file.
(sim_gx_compiled_block_dispose): Uninstall obsoleted gx block
shared libraries.
(sim_gx_block_translate): Always emit new "gx_label_NNNN" labels,
for basic block entry points, even if !__GNUC__.
[m32r-gx/ChangeLog]
1998-12-01 Frank Ch. Eigler <fche@elastic.org>
* Makefile.in (SIM_OBJS): Don't build sim-core.o.
* configure.in: Added --enable-sim-inline support.
Look for "getenv()" function.
* configure: Rebuilt.
* config.in: Rebuilt.
* gx-translate.c: Include "sim-inline.c" for sim-core inlining.
(m32r_gx_{load,store}*): Update signature.
(tgx_emit_pre_function): Emit new "tgx_info" struct, update
callback function signatures.
(m32r_emit_*_insn): Use new callback signatures. For all short
branches in optimized mode, emit direct "goto gx_label_NNNN".
(tgx_optimize_test): If the GX_OPTIMIZE environment variable is
set, allow its integer value to override the optimization heuristic.
* m32r-sim.h: New empty placeholder file.
* sim-main.c: New empty placeholder file.
* sim-if.c (sim_create_inferior): Use NULL instead of &abort
for unimplemented register fondling functions.
* sim-main.h: Add multiple inclusion guard. Update callback
function signatures.
(tgx_info): New struct for collecting gx block invocation
arguments.
v850/simops.c, d10v/simops.c, v850/Makefile.in, d10v/Makefile.in:
Include targ-vals.h instead of syscall.h. Replace SYS_* with
TARGET_SYS_*. Add dependency.
z8k/support.c: Include <errno.h>
v850/simops.c: Replace long with portable signed32.
mips/interp.c: Make sim_monitor global - needed by sky.
(CGEN_ARCH_SCM): New variable.
* cgen-engine.h (EXTRACT_[ML]SB0_{INT,UINT}): New macros.
(EXTRACT_INT,EXTRACT_UINT): New macros.
(SEM_SEM_ARG): New macro.
(SEM_NEXT_VPC): New arg `pc'.
* cgen-sim.h (EXTRACT_SIGNED,EXTRACT_UNSIGNED): Delete.
(sim_disassemble_insn): Update prototype.
* cgen-trace.c (current_insn,insn_fields): New static locals.
(trace_insn): Set them.
* cgen-utils.scm: #include cgen-engine.h.
(sim_disassemble_insn): New arg insn_fields.
Handle variable length insns.
* genmloop.sh: Only emit pbb decls if -pbb.
(${cpu}_scache_lookup): New arg `vpc'.
(scache support): Fetch pc before entering loop.
[d30v/ChangeLog]
1998-11-06 Frank Ch. Eigler <fche@cygnus.com>
* d30v-insns (do_mvfacc): Use loop to limit shift count to 63 .. 0.
[testsuite/d30v-elf/ChangeLog]
1998-11-06 Frank Ch. Eigler <fche@cygnus.com>
* do-shifts.S: Add test for large mvfacc shifts.
HAVE_PARALLEL_INSNS, define as 0 or 1. Emit decls of fns in mloop.cin.
* cgen-engine.h: Typedefs of IADDR,CIA,SEM_ARG,SEM_PC moved ...
* cgen-sim.h: ... to here.
Thu Oct 29 12:07:06 1998 Frank Ch. Eigler <fche@cygnus.com>
* t-psrlvw.s (test_psrlvw): Add test for sign-extension in insn.
* t-padsbh.s: New test.
* t-mult1.s: New test.
* Makefile.in: Run them.
routine as the number of bytes to process. This apparently is due to
text-mode vs binary-mode. If the mounts are done text-mode, then the
size returnedby fstat() may be different than the number of bytes
"read" in text mode.
(sim-core.o): Delete duplicate dependence on $(SIM_EXTRA_DEPS).
(sim-cpu.o,sim-endian.o,sim-hw.o): Ditto.
(cgen-run.o,cgen-scache.o,cgen-trace.o,cgen-utils.o): Delete
explicit cgen header dependencies, require SIM_EXTRA_DEPS to include
CGEN_INCLUDE_DEPS.
* cgen-cpu.h: New file.
* cgen-engine.h: New file.
* cgen-scache.h: New file.
* cgen-sim.h: Delete portions moved to new files.
* genmloop.sh: Generate two files eng.hin,mloop.cin explicitly,
rather than sending result to stdout.
(cgen-run.o): New rule.
* cgen-ops.h: Delete many BI macros. Change all UBI -> BI.
* cgen-run.c (prime_cpu): New function.
* cgen-scache.c: Add pseudo-basic-block (pbb) scaching support.
(scache_option_handler, case OPTION_PROFILE_SCACHE): Handle explicitly
mentioned cpu.
(scache_flush_cpu,scache_lookup,scache_lookup_or_alloc): New fns.
* cgen-sim.h (CGEN_INSN_VIRTUAL_TYPE): New enum.
(CGEN_INSN_VIRTUAL_P): New macro.
(SEM_PC): New typedef.
(SEMANTIC_FN): Change type of result to SEM_PC.
(SEM_SET_FULL_CODE,SEM_SET_FAST_CODE,SEM_SET_CODE): New macros.
(IDESC_CTI_P,IDESC_SKIP_P): New macros.
(SCACHE_MAP): New typedef.
(CPU_SCACHE): Add pbb support.
(scace_lookup,scache_lookup_or_alloc,scache_flush_cpu): Declare.
(SEM_BRANCH_INIT_EXTRACT,SEM_BRANCH_INIT,SEM_BRANCH_FINI): New macros.
(CGEN_CPU): New members running_p,insn_count,{fast,full}_engine_fn,
max_slice_insns.
(INSN_NAME): Delete.
(cgen_insn_name): Declare.
(sim_engine_invalid_insn): Renamed from sim_engine_illegal_insn.
* cgen-trace.c (trace_buf): Shrink from 1024 to 256 bytes.
(first_insn_p): Make static.
(trace_insn): Handle virtual insns specially.
(cgen_trace_printf): Ensure we haven't overflowed the buffer.
* cgen-types.h (UBI): Delete.
(MODE_TYPE): New enum.
(HOSTINT,HOSTUINT,HOSTPTR): Delete.
* cgen-utils.c (mode_names): Delete UBI. Add INT,UINT,PTR.
(cgen_virtual_opcode_table): New global.
(cgen_insn_name): New function.
(sim_disassemble_insn): Ignore virtual insns.
* genmloop.sh: Delete top level loop generation. Add pbb support.
* sim-cpu.h (CPU_INSN_NAME_FN): New typedef.
(sim_cpu_base): New members max_insns,insn_name,model_data.
(CPU_PC_GET,CPU_PC_SET): New macros.
(sim_pc_get,sim_pc_set): Declare.
* sim-model.c (model_set): Call model init fn.
* sim-model.h (MODEL_FN): New typedef.
(INSN_TIMING): New member model_fn.
(MODEL): New members num,init.
* sim-profile.c (sim_profile_print_bar): Renamed from print_bar.
All callers updated.
(profile_insn_init): New fn.
(profile_print_insn): Update, INSN_NAME -> CPU_INSN_NAME.
Exit early if insn profiling not supported.
(profile_print_memory): Update, MAX_MODES -> MODE_TARGET_MAX.
(profile_install): Record profile_insn_init as init fn.
(profile_uninstall): Free PROFILE_INSN_COUNT if non-null.
* sim-profile.h: Update, MAX_MODES -> MODE_TARGET_MAX.
(PROFILE_DATA): Delete member exec_time.
Change insn_count to pointer to array, rather than the array.
(sim_profile_print_bar): Declare.
Fri Sep 4 10:37:57 1998 Frank Ch. Eigler <fche@cygnus.com>
* r5900.igen (mtsab): Correct typo in input register.
* sim-main.h (TMP_*): New macros for accessing local 128-bit
temporary for multimedia instructions.
* r5900.igen (*): Convert most instructions to use new TMP
macros to store output result during computation.
* interp.c: use NUM_CORE_REGS
* sky-gdb.c (set_fifo_breakpoints): use VIF interrupt bit for break
* sky-pke.c (pke_issue): use interrupt bit for break points
Hack sanitize so that it doesn't sanitize vrXXX when either of
keep-vr5400 or keep-vr4320 are specified.
Move two basic vr4100 instructions from mips.igen to vr.igen.
* op_utils.c (do_syscall): Rewrite to use common/syscall.c.
(syscall_read_mem, syscall_write_mem): New functions for syscall
callbacks.
* mn10300_sim.h: Add prototypes for syscall_read_mem and
syscall_write_mem.
* mn10300.igen: Change C++ style comments to C style comments.
Check for divide by zero in div and divu ops.
Do not sign extend immediate for mov imm,XRn.
More random mul, mac & div fixes.
Remove some unused variables.
Sign extend 24bit displacement in memory addresses.
Whee, more fixes.
Minor fixes in multiply/divide patterns.
start-sanitize-am33
* am33.igen: Fix Z bit for addc Rm,Rn and subc Rm,Rn. Various
fixes to 2 register multiply, divide and mac instructions. Set
Z,N correctly for sat16. Sign extend 24 bit immediate for add,
and sub instructions.
* am33.igen: Add remaining non-DSP instructions.
end-sanitize-am33
(CPU_SCACHE_HASH_MASK): New macro.
(SCACHE_HASH_PC): Rewrite.
* genmloop.sh (engine_resume_{full,fast}): Move some of hash
computation out of main loop.
* dv-mn103tim.c: Include sim-assert.h
* dv-mn103ser.c (do_polling_event): Check for incoming data on
serial line and schedule next polling event.
(read_status_reg): schedule events to check for incoming data on
serial line and issue interrupt if necessary.
* sky-pke.c(read_pke_pcx): return index of current pc
* sky-pke.h: export read_pke_pcx
* interp.c(sim_fetch_registers): read pke pc/pcx
* sky-libvpe.c: track name change from GDB
* sim-main.h: add vif memory based pc
- extend gdb comm area for fifo breakpoints
- define SIM_ENGINE_RESTART_HOOK
* sky-gdb.c: add support for VIF breakpoints
Tue Jun 16 09:03:37 1998 Frank Ch. Eigler <fche@cygnus.com>
* t-cop2.s: Reorder instruction blocks to prevent "Out of bounds"
messages during test execution. Added dummy branch labels for BC2*
instructions.
* t-cop2.brn: Use --sky-debug option instead of env var.
* t-cop2.vuexpect: Updated for with new disassembly format.
* sky_sce_fast.exp: Don't compare GIF outputs for
--float-type=fast.
* sce_test{17,33,49}.dvpasm: Use ".DmaPackVif 1" option to
exercise assembler / PKE.
* rw-vureg.c: Cast memcpy operand to allay warning.
any open file handles before exiting
* sky-gpuif.[c|h]: add disassembly on the fly code, log and log
file option support
* sky-gdb.[c|h] (sky_command_options_close()): new function, added
some body to the log and log file option sections
which is now a list of options controlling the behaviour of sim_run.
* sim/sky/sky-defs.tcl (run_trc_test): Update to new way of
environment variables to sim_run.
* dv-mn103int.c (external_group): Use enumerated types to access
correct group addresses.
* dv-mn103tim.c (do_counter_event): Underflow of cascaded timer
triggers an interrupt on the higher-numbered timer's port.
Wed Jun 10 15:56:10 1998 Frank Ch. Eigler <fche@cygnus.com>
* sim/sky/t-int.c: New file to test sky hardware
interrupts.
* sim/sky/t-int-handler.s: New file for null interrupt
handler.
* sim/sky/t-int.brn: New file to build new test.
Tue Jun 9 12:29:50 1998 Frank Ch. Eigler <fche@cygnus.com>
* dv-tx3904cpu.c (deliver_*_interrupt,*_port_event): Set the CAUSE
register upon non-zero interrupt event level, clear upon zero
event value.
* dv-tx3904irc.c (*_port_event): Handle deactivated interrupt signal
by passing zero event value.
(*_io_{read,write}_buffer): Endianness fixes.
* dv-tx3904tmr.c (*_io_{read,write}_buffer): Endianness fixes.
(deliver_*_tick): Reduce sim event interval to 75% of count interval.
* interp.c (sim_open): Added jmr3904pal board type that adds PAL-based
serial I/O and timer module at base address 0xFFFF0000.
using sim-options.
start-sanitize-am30
* (board): Add --board option for specifying am32.
* (sim_open): Create new timer and serial devices and control
configuration of other am32 devices via board option.
end-sanitize-am30
It is not yet properly tested.
Thu Jun 4 15:37:33 1998 Frank Ch. Eigler <fche@cygnus.com>
* dv-tx3904tmr.c: New file - implements tx3904 timer.
* dv-tx3904{irc,cpu}.c: Mild reformatting.
* configure.in: Include tx3904tmr in hw_device list.
* configure: Rebuilt.
* interp.c (sim_open): Instantiate three timer instances.
Fix address typo of tx3904irc instance.
byte-swapping unnecessary. Add -sparclite-board option for
emulating RAM found on typical SPARClite boards. Print
error message for unrecognized option.
* erc32.c: Change RAM address and size from constants to variables,
to allow emulation of SPARClite board RAM.
(fetch_bytes, store_bytes): New helper functions for revamped
mememory_read and memory_write.
(memory_read, memory_write): Rewrite to store bytes in target
byte order instead of storing words in host byte order; this
greatly simplifies support of little-endian programs.
(get_mem_ptr): Remove unnecessary byte parameter.
(sis_memory_write, sis_memory_read): Store words in target
byte order instead of host byte order.
(byte_swap_words): Remove, no longer needed.
* sis.h ((byte_swap_words): Remove declaration, no longer needed.
(memory_read): Add new sz parameter.
* sis.c (run_sim): Use revamped memory_read, which makes
byte-swapping unnecessary.
* exec.c (dispatch_instruction): Use revamped memory_read, which
makes byte-swapping and double-word fetching unnecessary.
* func.c (sparclite_board): Declare new variable.
(get_regi): Handle little-endian data.
(bfd_load): Recognize little-endian SPARClite as having
little-endian data.
* armos.c (ARMul_OSHandleSWI::SWI_Open): Handle special case
of ":tt" to catch stdin in addition to stdout.
(ARMul_OSHandleSWI::SWI_Seek): Return 0 or 1 to indicate failure
or success of lseek().
From PR 15839, modified a bit by me to appease my sense of style--but
not too much because I am lazy.
Mon Jun 1 18:54:22 1998 Frank Ch. Eigler <fche@cygnus.com>
* lib/sim-defs.exp (sim_run): Add possible environment variable
list to simulator run.
start-sanitize-sky
* sim/sky/sky-defs.tcl: Use it.
* sim/sky/t-pke2.vif1out: Update to match recent word-precise
tracking table change in sim/mips/sky-pke.c.
* sim/sky/t-pke3.trc: Ditto.
* sim/sky/t-pke4.vif0expect: Ditto.
end-sanitize-sky
Mon May 18 10:37:47 1998 Doug Evans <devans@canuck.cygnus.com>
* mloopx.in (extract): Set abuf.addr for proper fill nop counting.
(execute): Count parallel insns.
* sim-if.c (print_m32r_misc_cpu): Print count.
* sim-main.h (M32R_MISC_PROFILE): New member parallel_count.
(trace_insn_init): Set it.
(trace_insn_fini): Use TRACE_PREFIX.
(trace_insn): Rewrite to use trace_prefix.
* sim-trace.c (trace_prefix): Don't print filename arg if NULL.
Adjust width accordingly.
* sim-profile.h (PROFILE_DATA): New member profile_any_p.
(PROFILE_ANY_P,PROFILE_INSN_P,PROFILE_MEMORY): New macros.
(PROFILE_SCACHE_P,PROFILE_PC_P,PROFILE_CORE_P): New macros.
(PROFILE_COUNT_INSN,PROFILE_COUNT_READ,PROFILE_COUNT_WRITE): Simplify.
(PROFILE_COUNT_CORE): Simplify.
* sim-profile.c (profile_option_handler): Compute profile_any_p.
* Followup patch for SCEI PR 15853
* First check-in of TX3904 interrupt controller devices for ECC. [sanitized]
* First implementation of MIPS hardware interrupt emulation.
Mon May 18 18:22:42 1998 Frank Ch. Eigler <fche@cygnus.com>
* configure.in (SIM_AC_OPTION_HARDWARE): Added common hardware
modules. Recognize TX39 target with "mips*tx39" pattern.
* configure: Rebuilt.
* sim-main.h (*): Added many macros defining bits in
TX39 control registers.
(SignalInterrupt): Send actual PC instead of NULL.
(SignalNMIReset): New exception type.
* interp.c (board): New variable for future use to identify
a particular board being simulated.
(mips_option_handler,mips_options): Added "--board" option.
(interrupt_event): Send actual PC.
(sim_open): Make memory layout conditional on board setting.
(signal_exception): Initial implementation of hardware interrupt
handling. Accept another break instruction variant for simulator
exit.
(decode_coproc): Implement RFE instruction for TX39.
(mips.igen): Decode RFE instruction as such.
start-sanitize-tx3904
* configure.in (tx3904cpu,tx3904irc): Added devices for tx3904.
* interp.c: Define "jmr3904" and "jmr3904debug" board types and
bbegin to implement memory map.
* dv-tx3904cpu.c: New file.
* dv-tx3904irc.c: New file.
end-sanitize-tx3904
* sim-engine.h (sim_engine_set_run_state): Declare.
* genmloop.sh (pending_reason,pending_sigrc): New static locals.
(@cpu@_engine_stop): New args reason,sigrc. All callers updated.
(engine_resume): Reorganize. Allow synchronous exit from main loop.
* exec.c (SDIV, SDIVCC, UDIV, UDIVCC): Define new opcodes.
* (mul64): Simplify calculation of negative result.
* (div64): New helper function for 64-bit division.
* (dispatch_instruction): Add emulation of SDIV, SDIVCC, UDIV,
and UDIVCC.
Replace check_op_hilo with check_mult_hilo and check_div_hilo.
Add special r3900 version of do_mult_hilo.
(do_dmultx,do_mult,do_multu): Replace calls to check_op_hilo
with calls to check_mult_hilo.
(do_ddiv,do_ddivu,do_div,do_divu): Replace calls to check_op_hilo
with calls to check_div_hilo.
for VU memory tracking tables.
Thu May 7 12:15:41 1998 Frank Ch. Eigler <fche@cygnus.com>
* sky-pke.c (pke_pcrel_operand_bits): Compute word-resolution
source address for UNPACK into VU MEM.
(pke_code_mpg): Ditto for MPG into VU uMEM.
Instead save them in the sim_hw structure.
*) Route sim-core accesses to hw devices through the sim_hw module.
*) Route hw device requests to abort/halt through the sim_hw module.
*) Add print parameter to hw_tree_print() function.
*) Add sim_engine_vabort () function.
* common/aclocal.m4: call AM_EXEEXT in SIM_AC_COMMON, define
AM_CYGWIN32 and AM_EXEEXT.
* common/Make-common.in: set EXEEXT, add missing EXEEXTs
to run and install-common rules.
* common/configure: regenerate
And update all subdirectory ChangeLogs and configure files.
and variable renaming due to macro insn additions.
* mloop.in: Update to use CGEN_INSN_NUM.
* cpu.x,modelx.c,readx.c,semx.c: Regenerated.
* mloopx.in: Update to use CGEN_INSN_NUM.
and variable renaming due to macro insn additions.
* mloop.in: Update to use CGEN_INSN_NUM.
* cpu.x,modelx.c,readx.c,semx.c: Regenerated.
* mloopx.in: Update to use CGEN_INSN_NUM.
../common' to autoconf and autoheader. Unconditionally run
autoconf in every subdir.
(autoconf-changelog autoheader-changelog): Unconditionally run
commands in every subdir.
(autoconf-install autoheader-install): Likewise.
* config.in: Ditto.
* Makefile.in (top_builddir): New macro.
(INTLLIBS): New macro.
(INTLDEPS): Likewise.
(psim): Depend on INTLDEPS; link against INTLLIBS.
* configure.in: Call CY_GNU_GETTEXT.
* config.in: Ditto.
* acconfig.h: New file.
* Make-common.in (top_builddir): New macro.
(INTL_LIB): Removed.
(INTLLIBS): New macro.
(INTLDEPS): Likewise.
(LIBDEPS): Use INTLDEPS.
(EXTRA_LIBS): Use INTLLIBS.
* aclocal.m4 (SIM_AC_COMMON): Call CY_GNU_GETTEXT.
(CY_WITH_NLS, CY_GNU_GETTEXT, AM_PATH_PROG_WITH_TEST,
AM_LC_MESSAGES): New macros from GNU gettext.
* gen.c (insns_bit_useless): Perform unsigned bit comparisons.
* filter.c (is_filtered_out, filter_parse): Pacify GCC, len is unsigned.
* gen-icache.c (print_icache_extraction): Do not type cast pointers.
