Commit Graph

6 Commits

Author SHA1 Message Date
Alan Modra
27cdfa03b5 m32c padding with nops
m32c_md_end attempted to pad out a code section with nops, but this
was just plain wrong in many ways:
- The padding didn't happen at all if the last section emitted wasn't
  a code section.
- The padding went to the wrong place if subsections were used, and
  the last subseg used wasn't the highest numbered subseg.
- Padding wasn't added to all code sections.
- If the last section was empty, it was padded to 4 bytes.
- The padding didn't go to a 4-byte alignment boundary, instead it
  effectively made the last instruction 4 bytes in size.
- The padding didn't take into account that code sections may have
  contents other than machine instructions.

So, rip it out and handle nop padding properly, also fixing .align
.balign/.p2align in the middle of code.

gas/
	* config/tc-m32c.c (insn_size): Delete static var.
	(md_begin): Don't set it.
	(m32c_md_end): Delete.
	(md_assemble): Add insn_size auto var.
	* config/tc-m32c.h (md_end): Don't define.
	(m32c_md_end): Delete.
	(NOP_OPCODE, HANDLE_ALIGN, MAX_MEM_FOR_RS_ALIGN_CODE): Define.
	* testsuite/gas/all/align.d: Remove m32c from notarget list.
	* testsuite/gas/all/incbin.d: Likewise.
	* testsuite/gas/elf/dwarf2-11.d: Likewise.
	* testsuite/gas/macros/semi.d: Likewise.
	* testsuite/gas/all/gas.exp (do_comment): Similarly.
ld/
	* testsuite/ld-scripts/fill.d: Don't xfail m32c
	* testsuite/ld-scripts/fill16.d: Likewise.
2019-05-04 17:23:18 +09:30
Alan Modra
c7df3df443 Revise "ld testsuite use of notarget"
git commit 624940689a wrongly changed fill.d and fill16.d notarget
entries to xfail, so revert that change and instead replace notarget
with skip.  The two tests are complementary.

This patch also modifies the pr20022 test to use .data, avoiding
xfails on targets that complain about dynamic relocations in .text.
This shows a bug in metag which discards section _foo in pr2022.so.

	* testsuite/ld-elf/hash.d: Comment on mips xfail.
	* testsuite/ld-gc/pr20022b.s: Use .data not .text.
	* testsuite/ld-gc/pr20022.d: Remove xfails.
	* testsuite/ld-scripts/fill.d: Revert most of last patch, but use
	skip rather than notarget.
	* testsuite/ld-scripts/fill16.d: Likewise.
2018-07-11 16:39:04 +09:30
Alan Modra
624940689a ld testsuite use of notarget
Much of the time it is better to use xfail rather than notarget to
hide a testsuite failure no one is planning on fixing.

1) When a target is fixed, an inappropriate xfail results in XPASS
   whereas notarget is silent.  Leaving in an inappropriate notarget
   entry risks the bug reappearing later, silently.
2) Tests might be used as a template for a new test, carrying over
   notarget and/or xfail.  Inappropriate notarget entries are silent.
3) An xfailed test that mysteriously XPASSes might actually indicate a
   bug.

	* testsuite/ld-elf/attributes.d: Use xfail rather than notarget.
	* testsuite/ld-elf/hash.d: Likewise.
	* testsuite/ld-elf/orphan-10.d: Likewise.
	* testsuite/ld-elf/overlay.d: Likewise.
	* testsuite/ld-elf/pr14926.d: Likewise.
	* testsuite/ld-elf/pr17550d.d: Likewise.
	* testsuite/ld-elf/pr19539.d: Likewise.
	* testsuite/ld-elf/pr22319.d: Likewise.
	* testsuite/ld-misc/defsym1.d: Likewise.
	* testsuite/ld-pe/pr19803.d: Likewise.
	* testsuite/ld-scripts/assign-loc.d: Likewise.
	* testsuite/ld-scripts/defined4.d: Likewise.
	* testsuite/ld-scripts/empty-address-1.d: Likewise.
	* testsuite/ld-scripts/empty-address-2a.d: Likewise.
	* testsuite/ld-scripts/empty-address-2b.d: Likewise.
	* testsuite/ld-scripts/fill.d: Likewise.
	* testsuite/ld-scripts/fill16.d: Likewise.
	* testsuite/ld-scripts/pr14962.d: Likewise.
	* testsuite/ld-scripts/pr14962-2.d: Likewise.
	* testsuite/ld-unique/pr21529.d: Likewise.
	* testsuite/ld-elf/compress1a.d: Likewise, and adjust targets.
	* testsuite/ld-elf/compressed1a.d: Likewise.
	* testsuite/ld-elf/compressed1d.d: Likewise.
	* testsuite/ld-elf/compressed1e.d: Likewise.
	* testsuite/ld-elf/eh5.d: Likewise.
	* testsuite/ld-elf/group8a.d: Likewise.
	* testsuite/ld-elf/linkonce2.d: Likewise.
	* testsuite/ld-elf/orphan-9.d: Likewise.
	* testsuite/ld-elf/pr17550a.d: Likewise.
	* testsuite/ld-elf/pr17550b.d: Likewise.
	* testsuite/ld-elf/pr17550c.d: Likewise.
	* testsuite/ld-elf/pr19162.d: Likewise.
	* testsuite/ld-elf/pr21884.d: Likewise.
	* testsuite/ld-gc/pr19167.d: Likewise.
	* testsuite/ld-gc/pr20022.d: Likewise.
	* testsuite/ld-gc/start.d: Likewise.
	* testsuite/ld-elf/orphan-11.d: Delete notarget.
	* testsuite/ld-elf/orphan-12.d: Likewise.
	* testsuite/ld-gc/stop.d: Likewise.
	* testsuite/ld-scripts/empty-address-3a.d: Likewise.
	* testsuite/ld-scripts/empty-address-3b.d: Likewise.
	* testsuite/ld-ifunc/pr17154-x86-64-now.d: Delete duplicate notarget.
	* testsuite/ld-scripts/section-match-1.d: Comment fix.
2018-07-10 23:58:29 +09:30
Alan Modra
ddb000396c Remove arm-epoc-pe support
bfd/
	* Makefile.am: Remove arm-epoc-pe support.
	* coff-arm.c: Likewise.
	* config.bfd: Likewise.
	* configure.ac: Likewise.
	* targets.c: Likewise.
	* epoc-pe-arm.c: Delete.
	* epoc-pei-arm.c: Delete.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* po/SRC-POTFILES.in: Regenerate.
binutils/
	* configure.ac: Remove arm-epoc-pe support.
	* dlltool.c: Likewise.
	* configure: Regenerate.
gas/
	* Makefile.am: Remove arm-epoc-pe support.
	* config/tc-arm.h: Likewise.
	* configure.tgt: Likewise.
	* testsuite/gas/all/gas.exp: Likewise.
	* testsuite/gas/arm/local_label_coff.d: Likewise.
	* testsuite/gas/arm/undefined.d: Likewise.
	* testsuite/gas/arm/undefined_coff.d: Likewise.
	* config/te-epoc-pe.h: Delete.
	* Makefile.in: Regenerate.
	* po/POTFILES.in: Regenerate.
ld/
	* Makefile.am: Remove arm-epoc-pe support.
	* configure.tgt: Likewise.
	* emultempl/pe.em: Likewise.
	* pe-dll.c: Likewise.
	* testsuite/ld-scripts/fill.d: Likewise.
	* testsuite/ld-scripts/fill16.d: Likewise.
	* emulparams/arm_epoc_pe.sh: Delete.
	* scripttempl/epocpe.sc: Delete.
	* Makefile.in: Regenerate.
	* po/BLD-POTFILES.in: Regenerate.
2018-04-16 20:29:05 +09:30
Maciej W. Rozycki
62a5222fda LD/testsuite: Add 2**4 section alignment FILL script statement test
Complement commit ffe54b3798 ("Pad sections according to current
script FILL.") and add a FILL script statement test for targets that
impose the minimum alignment of more than 2**2 for the `.text' section.
These targets include IA-64 targets, MIPS targets other than bare-metal
ELF and VxWorks, TILE-Gx targets, TILEPro targets and X86-64 PE targets.

Use the `notarget' tag for configuration triplets that are incompatible
with the new test, but are supported by the existing FILL test, and
`xfail' for ones that have issues due to section alignment or padding
with both tests.  Make a complementary change to the existing FILL test,
removing the following test issues:

arm-epoc-pe  -FAIL: ld-scripts/fill
mips-elf  -XPASS: ld-scripts/fill
mips-img-elf  -XPASS: ld-scripts/fill
mips-mti-elf  -XPASS: ld-scripts/fill
mips-sde-elf  -XPASS: ld-scripts/fill
mips-vxworks  -XPASS: ld-scripts/fill
mipsel-elf  -XPASS: ld-scripts/fill
mipsel-img-elf  -XPASS: ld-scripts/fill
mipsel-mti-elf  -XPASS: ld-scripts/fill
mipsel-vxworks  -XPASS: ld-scripts/fill
mipsisa32-elf  -XPASS: ld-scripts/fill
mipsisa32el-elf  -XPASS: ld-scripts/fill
mipsisa64-elf  -XPASS: ld-scripts/fill
mipsisa64el-elf  -XPASS: ld-scripts/fill
tilegx-linux  -FAIL: ld-scripts/fill
tilepro-elf  -FAIL: ld-scripts/fill
tx39-elf  -XPASS: ld-scripts/fill

	ld/
	* testsuite/ld-scripts/fill.d: Adjust `xfail' entries.  Add
	`notarget' entries.  Update comments.
	* testsuite/ld-scripts/fill16.d: New test.
	* testsuite/ld-scripts/fill16_0.s: New test source.
	* testsuite/ld-scripts/fill16_1.s: New test source.
	* testsuite/ld-scripts/fill16_2.s: New test source.
	* testsuite/ld-scripts/data.exp: Run the new test.
2017-07-19 13:11:59 +01:00
Alan Modra
ffe54b3798 Pad sections according to current script FILL.
When aligning input sections, we are supposed to take the fill pattern
from a FILL statement, if there is one in the output section statement.

ld/
	* ldlang.c (lang_size_sections_1 <lang_input_section_enum>): Use
	current "fill", not "output_section_statement->fill".
ld/testsuite/
	* ld-scripts/fill.d, * ld-scripts/fill.t, * ld-scripts/fill_0.s,
	* ld-scripts/fill_1.s, * ld-scripts/fill_2.s: New test.
	* ld-scripts/data.exp: Run it.
2014-04-04 19:06:35 +10:30