PPC_INT_FMT is redundant now that bfd.h pulls in inttypes.h if
available. Apparently MacOS Mojave defines int64_t as long long even
though long is also 64 bits, which confuses the logic selecting
PPC_INT_FMT (and BFD_PRI64 too). Hopefully inttypes.h is available on
Mojave.
PR 24028
include/
* opcode/ppc.h (PPC_INT_FMT): Delete.
opcodes/
* ppc-dis.c (print_insn_powerpc): Replace PPC_INT_FMT uses with
PRId64/PRIx64.
Linkers group input note sections with the same name into one output
note section with the same name. One output note section is placed in
one PT_NOTE segment. New linkers merge all input .note.gnu.property
sections into one output .note.gnu.property section with a single
NT_GNU_PROPERTY_TYPE_0 note in a single PT_NOTE segment. Since older
linkers treat input .note.gnu.property section as a generic note section
and just concatenate all input .note.gnu.property sections into one
output .note.gnu.property section without merging them, we may
see one or more NT_GNU_PROPERTY_TYPE_0 notes in PT_NOTE segment, which
are invalid.
GNU_PROPERTY_X86_UINT32_VALID was defined to address this issue such
that linker sets the bit for non-relocatable outputs. But it isn't
sufficient:
1. It doesn't cover generic properties.
2. When -mx86-used-note=yes is passed to x86 assembler, the
GNU_PROPERTY_X86_UINT32_VALID bit is set in GNU_PROPERTY_X86_ISA_1_USED
property in object file and older linkers generate invalid
NT_GNU_PROPERTY_TYPE_0 notes with the GNU_PROPERTY_X86_UINT32_VALID bit
set.
I am proposing the following changes:
1. Add PT_GNU_PROPERTY segment type:
# define PT_GNU_PROPERTY (PT_LOOS + 0x474e553)
which covers .note.gnu.property section.
2. Remove GNU_PROPERTY_X86_UINT32_VALID.
bfd/
PR ld/23900
* elf.c (get_program_header_size): Add a PT_GNU_PROPERTY
segment for NOTE_GNU_PROPERTY_SECTION_NAME.
(_bfd_elf_map_sections_to_segments): Create a PT_GNU_PROPERTY
segment for NOTE_GNU_PROPERTY_SECTION_NAME.
* elfxx-x86.c (_bfd_elf_link_setup_gnu_properties): Don't set
GNU_PROPERTY_X86_UINT32_VALID.
binutils/
PR ld/23900
* readelf.c (get_segment_type): Support PT_GNU_PROPERTY.
(decode_x86_isa): Don't check GNU_PROPERTY_X86_UINT32_VALID.
(decode_x86_feature_1): Likewise.
(decode_x86_feature_2): Likewise.
(print_gnu_property_note): Remove GNU_PROPERTY_X86_UINT32_VALID
check.
* testsuite/binutils-all/i386/empty.d: Updated.
* testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
* testsuite/binutils-all/x86-64/empty.d: Likewise.
* testsuite/binutils-all/i386/pr21231b.s: Change
GNU_PROPERTY_X86_ISA_1_USED bits to 0x7fffffff.
* testsuite/binutils-all/x86-64/pr21231b.s: Likewise.
gas/
PR ld/23900
* config/tc-i386.c (x86_cleanup): Don't set
GNU_PROPERTY_X86_UINT32_VALID.
* testsuite/gas/i386/property-1.s: Change
GNU_PROPERTY_X86_ISA_1_USED bits to 0.
include/
PR ld/23900
* elf/common.h (PT_GNU_PROPERTY): New.
(GNU_PROPERTY_X86_UINT32_VALID): Removed.
ld/
PR ld/23900
* testsuite/ld-elf/elf.exp: Run PR ld/23900 test.
* testsuite/ld-elf/pr23900-1-32.rd: New file.
* testsuite/ld-elf/pr23900-1-64.rd: Likewise.
* testsuite/ld-elf/pr23900-1.d: Likewise.
* testsuite/ld-elf/pr23900-1.s: Likewise.
* testsuite/ld-elf/pr23900-2.s: Likewise.
* testsuite/ld-elf/pr23900-2a.d: Likewise.
* testsuite/ld-elf/pr23900-2b.d: Likewise.
* testsuite/ld-i386/ibt-plt-1.d: Adjusted.
* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
* testsuite/ld-i386/ibt-plt-2d.d: Likewise.
* testsuite/ld-i386/ibt-plt-3d.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
* testsuite/ld-i386/pr23372c.d: Expect <None>
for GNU_PROPERTY_X86_ISA_1_USED.
* testsuite/ld-x86-64/pr23372c-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372c.d: Likewise.
* testsuite/ld-x86-64/pr23372d-x32.d: Likewise.
* testsuite/ld-x86-64/pr23372d.d: Likewise.
* testsuite/ld-x86-64/property-x86-5a.s: Change
GNU_PROPERTY_X86_ISA_1_USED bits to 0.
* testsuite/ld-x86-64/property-x86-5b.s: Likewise.
PR 88409
include * demangle.h (DEMANGLE_RECURSION_LIMIT): Increase to 2048.
binutils* NEWS: Note that recursion limit has increased to 2048.
* doc/binutils.texi: Likewise.
This patch addresses the multitude of bug reports about resource exhaustion
in libiberty's name demangling code. It adds a limit to the amount of
recursion that is allowed, before an error is triggered. It also adds a
new demangling option to disable this limit. (The limit is enabled by
default).
PR 87681
PR 87675
PR 87636
PR 87335
libiberty * cp-demangle.h (struct d_info): Add recursion_limit field.
* cp-demangle.c (d_function_type): If the recursion limit is
enabled and reached, return with a failure result.
(d_demangle_callback): If the recursion limit is enabled, check
for a mangled string that is so long that there is not enough
stack space for the local arrays.
* cplus-dem.c (struct work): Add recursion_level field.
(demangle_nested_args): If the recursion limit is enabled and
reached, return with a failure result.
include * demangle.h (DMGL_RECURSE_LIMIT): Define.
(DEMANGLE_RECURSION_LIMIT): Prototype.
binutuils * addr2line.c (demangle_flags): New static variable.
(long_options): Add --recurse-limit and --no-recurse-limit.
(translate_address): Pass demangle_flags to bfd_demangle.
(main): Handle --recurse-limit and --no-recurse-limit options.
* cxxfilt.c (flags): Add DMGL_RECURSE_LIMIT.
(long_options): Add --recurse-limit and --no-recurse-limit.
(main): Handle new options.
* dlltool.c (gen_def_file): Include DMGL_RECURSE_LIMIT in flags
passed to cplus_demangle.
* nm.c (demangle_flags): New static variable.
(long_options): Add --recurse-limit and --no-recurse-limit.
(main): Handle new options.
* objdump.c (demangle_flags): New static variable.
(usage): Add --recurse-limit and --no-recurse-limit.
(long_options): Likewise.
(objdump_print_symname): Pass demangle_flags to bfd_demangle.
(disassemble_section): Likewise.
(dump_dymbols): Likewise.
(main): Handle new options.
* prdbg.c (demangle_flags): New static variable.
(tg_variable): Pass demangle_flags to demangler.
(tg_start_function): Likewise.
* stabs.c (demangle_flags): New static variable.
(stab_demangle_template): Pass demangle_flags to demangler.
(stab_demangle_v3_argtypes): Likewise.
(stab_demangle_v3_arg): Likewise.
* doc/binutuls.texi: Document new command line options.
* NEWS: Mention the new feature.
* testsuite/config/default.exp (CXXFILT): Define if not already
defined.
(CXXFILTFLAGS): Likewise.
* testsuite/binutils-all/cxxfilt.exp: New file. Runs a few
simple tests of the cxxfilt program.
This patch started off just adding the warnings in tc-ppc.c about
incorrect usage of @l, @h and @ha in instructions that don't have
16-bit D-form fields. That unfortunately showed up three warnings in
ld/testsuite/ld-powerpc/vle-multiseg.s on instructions like
e_li r3, IV_table@l+0x00
which was being assembled to
8: 70 60 00 00 e_li r3,0
a: R_PPC_ADDR16_LO IV_table
The ADDR16_LO reloc is of course completely bogus on e_li, which has
a split 20-bit signed integer field in bits 0x1f7fff, the low 11 bit
in 0x7ff, the next 5 bits in 0x1f0000, and the high 4 bits in 0x7800.
Applying an ADDR16_LO reloc to the instruction potentially changes
the e_li instruction to e_add2i., e_add2is, e_cmp16i, e_mull2i,
e_cmpl16i, e_cmph16i, e_cmphl16i, e_or2i, e_and2i., e_or2is, e_lis,
e_and2is, or some invalid encodings.
Now there is a relocation that suits e_li, R_PPC_VLE_ADDR20, which was
added 2017-09-05 but I can't see code in gas to generate the
relocation. In any case, VLE_ADDR20 probably doesn't have the correct
semantics for @l since ideally you'd want an @l to pair with @h or @ha
to generate a 32-bit constant. Thus @l should only produce a 16-bit
value, I think. So we need some more relocations to handle e_li it
seems, or as I do in this patch, modify the behaviour of existing
relocations when applied to e_li instructions.
include/
* opcode/ppc.h (E_OPCODE_MASK, E_LI_MASK, E_LI_INSN): Define.
bfd/
* elf32-ppc.c (ppc_elf_howto_raw <R_PPC_VLE_ADDR20>): Correct
mask and shift value.
(ppc_elf_vle_split16): Use E_OPCODE_MASK. Handle e_li
specially.
gas/
* config/tc-ppc.c (md_assemble): Adjust relocs for VLE before
TLS tweaks. Handle e_li. Warn on unexpected operand field
for lo16/hi16/ha16 relocs.
The RISC-V assembler generates fake labels with the name '.L0 ' as
part of the debug information (see
gas/config/tc-riscv.h:FAKE_LABEL_NAME).
The problem is that currently, when disassembling an object file, the
output looks like this (this is an example from the GDB testsuite, but
is pretty representative of anything with debug information):
000000000000001e <main>:
1e: 7179 addi sp,sp,-48
20: f406 sd ra,40(sp)
22: f022 sd s0,32(sp)
24: 1800 addi s0,sp,48
0000000000000026 <.L0 >:
26: 87aa mv a5,a0
28: feb43023 sd a1,-32(s0)
2c: fcc43c23 sd a2,-40(s0)
30: fef42623 sw a5,-20(s0)
0000000000000034 <.L0 >:
34: fec42783 lw a5,-20(s0)
38: 0007871b sext.w a4,a5
3c: 678d lui a5,0x3
3e: 03978793 addi a5,a5,57 # 3039 <.LASF30+0x2a9d>
42: 02f71463 bne a4,a5,6a <.L0 >
0000000000000046 <.L0 >:
46: 000007b7 lui a5,0x0
4a: 0007b783 ld a5,0(a5) # 0 <need_malloc>
4e: 6f9c ld a5,24(a5)
0000000000000050 <.L0 >:
50: 86be mv a3,a5
52: 466d li a2,27
54: 4585 li a1,1
56: 000007b7 lui a5,0x0
5a: 00078513 mv a0,a5
5e: 00000097 auipc ra,0x0
62: 000080e7 jalr ra # 5e <.L0 +0xe>
0000000000000066 <.L0 >:
66: 4785 li a5,1
68: a869 j 102 <.L0 >
000000000000006a <.L0 >:
6a: 000007b7 lui a5,0x0
6e: 00078513 mv a0,a5
72: 00000097 auipc ra,0x0
76: 000080e7 jalr ra # 72 <.L0 +0x8>
The frequent repeated '.L0 ' labels are pointless, as they are
non-unique there's no way to match a use of '.L0 ' to its appearence
in the output, so we'd be better off just not printing it at all.
That's what this patch does by defining a 'symbol_is_valid' method for
RISC-V. With this commit, the same disassembly now looks like this:
000000000000001e <main>:
1e: 7179 addi sp,sp,-48
20: f406 sd ra,40(sp)
22: f022 sd s0,32(sp)
24: 1800 addi s0,sp,48
26: 87aa mv a5,a0
28: feb43023 sd a1,-32(s0)
2c: fcc43c23 sd a2,-40(s0)
30: fef42623 sw a5,-20(s0)
34: fec42783 lw a5,-20(s0)
38: 0007871b sext.w a4,a5
3c: 678d lui a5,0x3
3e: 03978793 addi a5,a5,57 # 3039 <.LASF30+0x2a9d>
42: 02f71463 bne a4,a5,6a <.L4>
46: 000007b7 lui a5,0x0
4a: 0007b783 ld a5,0(a5) # 0 <need_malloc>
4e: 6f9c ld a5,24(a5)
50: 86be mv a3,a5
52: 466d li a2,27
54: 4585 li a1,1
56: 000007b7 lui a5,0x0
5a: 00078513 mv a0,a5
5e: 00000097 auipc ra,0x0
62: 000080e7 jalr ra # 5e <main+0x40>
66: 4785 li a5,1
68: a869 j 102 <.L5>
000000000000006a <.L4>:
6a: 000007b7 lui a5,0x0
6e: 00078513 mv a0,a5
72: 00000097 auipc ra,0x0
76: 000080e7 jalr ra # 72 <.L4+0x8>
In order to share the fake label between the assembler and the
libopcodes library, I've added some new defines RISCV_FAKE_LABEL_NAME
and RISCV_FAKE_LABEL_CHAR in include/opcode/riscv.h. I could have
just moved FAKE_LABEL_NAME to the include file, however, I thnk this
would be confusing, someone working on the assembler would likely not
expect to find FAKE_LABEL_NAME defined outside of the assembler source
tree. By introducing the RISCV_FAKE_LABEL_* defines I can leave the
assembler standard FAKE_LABEL_ defines in the assembler source, but
still share the RISCV_FAKE_LABEL_* with libopcodes.
gas/ChangeLog:
* config/tc-riscv.h (FAKE_LABEL_NAME): Define as
RISCV_FAKE_LABEL_NAME.
(FAKE_LABEL_CHAR): Define as RISCV_FAKE_LABEL_CHAR.
include/ChangeLog:
* dis-asm.h (riscv_symbol_is_valid): Declare.
* opcode/riscv.h (RISCV_FAKE_LABEL_NAME): Define.
(RISCV_FAKE_LABEL_CHAR): Define.
opcodes/ChangeLog:
* disassembler.c (disassemble_init_for_target): Add RISC-V
initialisation.
* riscv-dis.c (riscv_symbol_is_valid): New function.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch add support to the Bulk Allocation Tag instructions from
MTE. These are the following instructions added in this patch:
- LDGV <Xt>, [<Xn|SP>]!
- STGV <Xt>, [<Xn|SP>]!
This needed a new kind of operand for the new addressing [<Xn|SP>]!
since this has no offset and only takes a pre-indexed version.
Hence AARCH64_OPND_ADDR_SIMPLE_2 and ldtdgv_indexed are introduced.
(AARCH64_OPND_ADDR_SIMPLE fulfilled the no offset criteria but does
not allow writeback). We also needed new encoding and decoding
functions to be able to do the same.
where
<Xt> : Is the 64-bit destination GPR.
<Xn|SP> : Is the 64-bit first source GPR or Stack pointer.
*** include/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_ADDR_SIMPLE_2.
(aarch64_insn_class): Add ldstgv_indexed.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-asm.c (aarch64_ins_addr_simple_2): New.
* aarch64-asm.h (ins_addr_simple_2): Declare the above.
* aarch64-dis.c (aarch64_ext_addr_simple_2): New.
* aarch64-dis.h (ext_addr_simple_2): Declare the above.
* aarch64-opc.c (operand_general_constraint_met_p): Add case for
AARCH64_OPND_ADDR_SIMPLE_2 and ldstgv_indexed.
(aarch64_print_operand): Add case for AARCH64_OPND_ADDR_SIMPLE_2.
* aarch64-tbl.h (aarch64_opcode_table): Add stgv and ldgv.
(AARCH64_OPERANDS): Define ADDR_SIMPLE_2.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_operands): Add switch case for
AARCH64_OPND_ADDR_SIMPLE_2 and allow [base]! for it.
(warn_unpredictable_ldst): Exempt ldstgv_indexed for ldgv.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for ldgv and stgv.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch add support to the Tag setting instructions from
MTE which consists of the following instructions:
- STG [<Xn|SP>, #<simm>]
- STG [<Xn|SP>, #<simm>]!
- STG [<Xn|SP>], #<simm>
- STZG [<Xn|SP>, #<simm>]
- STZG [<Xn|SP>, #<simm>]!
- STZG [<Xn|SP>], #<simm>
- ST2G [<Xn|SP>, #<simm>]
- ST2G [<Xn|SP>, #<simm>]!
- ST2G [<Xn|SP>], #<simm>
- STZ2G [<Xn|SP>, #<simm>]
- STZ2G [<Xn|SP>, #<simm>]!
- STZ2G [<Xn|SP>], #<simm>
- STGP <Xt>, <Xt2>, [<Xn|SP>, #<imm>]
- STGP <Xt>, <Xt2>, [<Xn|SP>, #<imm>]!
- STGP <Xt>, <Xt2>, [<Xn|SP>], #<imm>
where
<Xn|SP> : Is the 64-bit GPR or Stack pointer.
<simm> : Is the optional signed immediate offset, a multiple of 16
in the range -4096 to 4080, defaulting to 0.
*** include/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_ADDR_SIMM11
and AARCH64_OPND_ADDR_SIMM13.
(aarch64_opnd_qualifier): Add new AARCH64_OPND_QLF_imm_tag.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (aarch64_opnd_qualifiers): Add new data
for AARCH64_OPND_QLF_imm_tag.
(operand_general_constraint_met_p): Add case for
AARCH64_OPND_ADDR_SIMM11 and AARCH64_OPND_ADDR_SIMM13.
(aarch64_print_operand): Likewise.
* aarch64-tbl.h (QL_LDST_AT, QL_STGP): New.
(aarch64_opcode_table): Add stg, stzg, st2g, stz2g and stgp
for both offset and pre/post indexed versions.
(AARCH64_OPERANDS): Define ADDR_SIMM11 and ADDR_SIMM13.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_operands): Add switch case for
AARCH64_OPND_ADDR_SIMM11 and AARCH64_OPND_ADDR_SIMM13.
(fix_insn): Likewise.
(warn_unpredictable_ldst): Exempt STGP.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for stg, st2g,
stzg, stz2g and stgp.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions which is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch add support to the Tag generation instructions from
MTE. These are the following instructions added in this patch:
- IRG <Xd|SP>, <Xn|SP>{, Xm}
- ADDG <Xd|SP>, <Xn|SP>, #<uimm1>. #<uimm2>
- SUBG <Xd|SP>, <Xn|SP>, #<uimm1>. #<uimm2>
- GMI <Xd>, <Xn|SP>, <Xm>
where
<Xd|SP> : Is the 64-bit destination GPR or Stack pointer.
<Xn|SP> : Is the 64-bit source GPR or Stack pointer.
<uimm6> : Is the unsigned immediate, a multiple of 16
in the range 0 to 1008.
<uimm4> : Is the unsigned immediate, in the range 0 to 15.
*** include/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (aarch64_opnd): Add
AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10 as new enums.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.h (aarch64_field_kind): New FLD_imm4_3.
(OPD_F_SHIFT_BY_4, operand_need_shift_by_four): New.
* aarch64-opc.c (fields): Add entry for imm4_3.
(operand_general_constraint_met_p): Add cases for
AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10.
(aarch64_print_operand): Likewise.
* aarch64-tbl.h (QL_ADDG): New.
(aarch64_opcode_table): Add addg, subg, irg and gmi.
(AARCH64_OPERANDS): Define UIMM4_ADDG and UIMM10.
* aarch64-asm.c (aarch64_ins_imm): Add case for
operand_need_shift_by_four.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_operands): Add switch case for
AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: New.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
* testsuite/gas/aarch64/illegal-memtag.d: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
Memory Tagging Extensions. Memory Tagging Extension is an optional extension to
ARMv8.5-A and is enabled using the +memtag command line option.
This patch adds the new command line option and the new feature macros.
*** include/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_MEMTAG): New.
*** opcodes/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_feature_memtag): New.
(MEMTAG, MEMTAG_INSN): New.
*** gas/ChangeLog ***
2018-11-12 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_features): Add "memtag"
as a new option.
* doc/c-aarch64.texi: Document the same.
bfd * mach-o.h: Add new enums for BFD_MACH_O_PLATFORM_MACOS,
BFD_MACH_O_PLATFORM_IOS, BFD_MACH_O_PLATFORM_TVOS,
BFD_MACH_O_PLATFORM_WATCHOS, BFD_MACH_O_PLATFORM_BRIDGEOS,
BFD_MACH_O_TOOL_CLANG, BFD_MACH_O_TOOL_SWIFT, BFD_MACH_O_TOOL_LD.
(struct bfd_mach_o_note_command): New.
(struct bfd_mach_o_build_version_tool): New.
(struct bfd_mach_o_build_version_command): New.
(bfd_mach_o_read_version_min): Don't split version into
a few fields. Rename reserved to sdk.
* mach-o.c (bfd_mach_o_read_version_min): Don't split version into a
few fields. Rename reserved to sdk.
(bfd_mach_o_read_command): Handle LC_VERSION_MIN_TVOS, LC_NOTE,
LC_BUILD_VERSION.
(bfd_mach_o_read_note): New.
(bfd_mach_o_read_build_version): New.
PR 23728
binutils* od-macho.c (printf_version): New.
(dump_load_command): Use it to print version. Print sdk version. Print
version info for watchOS and tvOS. Print LC_NOTE, LC_BUILD_VERSION.
(dump_buld_version): New.
(bfd_mach_o_platform_name): New
(bfd_mach_o_tool_name): New
* mach-o/external.h (mach_o_nversion_min_command_external): Rename
reserved to sdk.
(mach_o_note_command_external): New.
(mach_o_build_version_command_external): New.
* mach-o/loader.h (BFD_MACH_O_LC_VERSION_MIN_TVOS): Define.
(BFD_MACH_O_LC_NOTE): Define.
This patch addresses the following
1) Adding ARMv8.5-A in select_arm_features.
2) Updating the feature macro so that the new ARM_EXT2_* features for
Armv8.5-A are moved to ARM_AEXT2_V8_5A.
*** opcodes/ChangeLog ***
2018-11-06 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (select_arm_features): Update bfd_mach_arm_8
with Armv8.5-A. Remove reduntant ARM_EXT2_FP16_FML.
*** include/ChangeLog ***
2018-11-06 Sudakshina Das <sudi.das@arm.com>
* opcode/arm.h (ARM_ARCH_V8_5A): Move ARM_EXT2_PREDRES and
ARM_EXT2_SB to ...
(ARM_AEXT2_V8_5A): Here.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
The encodings can be found in the System Register XML.
This patch adds support for the mitigation for Spectre Variant 4 by
adding the PSTATE bit SSBS which are accessible using MSR and MRS
instructions. Although this is a mandatory addition to the ARMv8.5-A,
it is permitted to be added to any version of the ARMv8 architecture.
This is enabled using the command line option of +ssbs for older
versions.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_SSBS): New.
(AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_SSBS by default.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (operand_general_constraint_met_p): Add
SSBS in the check for one-bit immediate.
(aarch64_sys_regs): New entry for SSBS.
(aarch64_sys_reg_supported_p): New check for above.
(aarch64_pstatefields): New entry for SSBS.
(aarch64_pstatefield_supported_p): New check for above.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_features): Add new "ssbs".
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/ssbs-illegal1.d: New test.
* testsuite/gas/aarch64/ssbs-illegal1.l: New test.
* testsuite/gas/aarch64/ssbs-illegal2.d: New test.
* testsuite/gas/aarch64/ssbs-illegal2.l: New test.
* testsuite/gas/aarch64/ssbs.s: New test.
* testsuite/gas/aarch64/ssbs1.d: Test with +ssbs
* testsuite/gas/aarch64/ssbs2.d: Test with armv8.5-a.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
The encodings can be found in the System Register XML.
This patch adds the new system registers SCXTNUM_ELx and ID_PFR2_EL1.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_SCXTNUM): New.
(AARCH64_FEATURE_ID_PFR2): New.
(AARCH64_ARCH_V8_5): Add both by default.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (aarch64_sys_regs): New entries for
scxtnum_el[0,1,2,3,12] and id_pfr2_el1.
(aarch64_sys_reg_supported_p): New checks for above.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/sysreg-4.s: Test registers
scxtnum_el[0,1,2,3,12] and id_pfr2_el1.
* testsuite/gas/aarch64/sysreg-4.d: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-4.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order/bti-branch-target-identification)
The Branch Target Identification instructions (BTI) are allocated to
existing HINT space, using HINT numbers 32, 34, 36, 38, such that
bits[7:6] of the instruction identify the compatibility of the BTI
instruction to different branches.
BTI {<targets>}
where <targets> one of the following, specifying which type of
indirection is allowed:
j : Can be a target of any BR Xn isntruction.
c : Can be a target of any BLR Xn and BR {X16|X17}.
jc: Can be a target of any free branch.
A BTI instruction without any <targets> is the strictest of all and
can not be a target of nay free branch.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_BTI): New.
(AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_BTI by default.
(aarch64_opnd): Add AARCH64_OPND_BTI_TARGET.
(HINT_OPD_CSYNC, HINT_OPD_C, HINT_OPD_J): New macros to
define HINT #imm values.
(HINT_OPD_JC, HINT_OPD_NULL): Likewise.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.h (HINT_OPD_NOPRINT, HINT_ENCODE): New.
(HINT_FLAG, HINT_VALUE): New macros to encode NO_PRINT flag
with the hint immediate.
* aarch64-opc.c (aarch64_hint_options): New entries for
c, j, jc and default (with HINT_OPD_F_NOPRINT flag) for BTI.
(aarch64_print_operand): Add case for AARCH64_OPND_BTI_TARGET
while checking for HINT_OPD_F_NOPRINT flag.
* aarch64-dis.c (aarch64_ext_hint): Use new HINT_VALUE to
extract value.
* aarch64-tbl.h (aarch64_feature_bti, BTI, BTI_INSN): New.
(aarch64_opcode_table): Add entry for BTI.
(AARCH64_OPERANDS): Add new description for BTI targets.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (parse_bti_operand): New.
(process_omitted_operand): Add case for AARCH64_OPND_BTI_TARGET.
(parse_operands): Likewise.
* testsuite/gas/aarch64/system.d: Update for BTI.
* testsuite/gas/aarch64/bti.s: New.
* testsuite/gas/aarch64/bti.d: New.
* testsuite/gas/aarch64/illegal-bti.d: New.
* testsuite/gas/aarch64/illegal-bti.l: New.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
The encodings can be found in the System Register XML.
This patch adds the following:
MSR Xn, RNDR
MSR Xn, RNDRRS
These are optional instructions in ARMv8.5-A and hence the new
+rng is added.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_RNG): New.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (aarch64_sys_regs): New entries for
rndr and rndrrs.
(aarch64_sys_reg_supported_p): New check for above.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_features): New "rng" option.
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/sysreg-4.s: Test both instructions.
* testsuite/gas/aarch64/sysreg-4.d: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-4.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order/dc-data-cache-operation-an-alias-of-sys)
This patch adds the DC CVADP instruction. Since this has a separate
identification mechanism a new feature bit is added.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_CVADP): New.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-opc.c (aarch64_sys_regs_dc): New entry for cvadp.
(aarch64_sys_ins_reg_supported_p): New check for above.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/sysreg-4.s: Test instruction.
* testsuite/gas/aarch64/sysreg-4.d: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-4.l: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order)
This patch adds the prediction restriction instructions (that is, cfp,
dvp, cpp). These instructions are retrospectively made optional for
all versions of the architecture from ARMv8.0 to ARMv8.4 and is
mandatory from ARMv8.5. Hence adding a new +predres which can be used
by the older architectures.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_PREDRES): New.
(AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_PREDRES by default.
(aarch64_opnd): Add AARCH64_OPND_SYSREG_SR.
(aarch64_sys_regs_sr): Declare new table.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-dis.c (aarch64_ext_sysins_op): Add case for
AARCH64_OPND_SYSREG_SR.
* aarch64-opc.c (aarch64_print_operand): Likewise.
(aarch64_sys_regs_sr): Define table.
(aarch64_sys_ins_reg_supported_p): Check for RCTX with
AARCH64_FEATURE_PREDRES.
* aarch64-tbl.h (aarch64_feature_predres): New.
(PREDRES, PREDRES_INSN): New.
(aarch64_opcode_table): Add entries for cfp, dvp and cpp.
(AARCH64_OPERANDS): Add new description for SYSREG_SR.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_sys_regs_sr_hsh): New.
(parse_operands): Add entry for AARCH64_OPND_SYSREG_SR.
(md_begin): Allocate and initialize aarch64_sys_regs_sr_hsh
with aarch64_sys_regs_sr.
(aarch64_features): Add new "predres" option for older
architectures.
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/sysreg-4.s: New.
* testsuite/gas/aarch64/sysreg-4.d: New.
* testsuite/gas/aarch64/illegal-sysreg-4.d: New.
* testsuite/gas/aarch64/illegal-sysreg-4.l: New.
* testsuite/gas/aarch64/predres.s: New.
* testsuite/gas/aarch64/predres.d: New.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order)
This instruction is retrospectively made optional for all versions of
the architecture from ARMv8.0 to ARMv8.4 and is mandatory from
ARMv8.5. Hence a new command line option of "+sb" is added for older
architectures.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_SB): New.
(AARCH64_ARCH_V8_5): Add AARCH64_FEATURE_SB by default.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_feature_sb): New.
(SB, SB_INSN): New.
(aarch64_opcode_table): Add entry for sb.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_features): Add new "sb" option
for older architectures.
* doc/c-aarch64.texi: Document the same.
* testsuite/gas/aarch64/sb.s: New.
* testsuite/gas/aarch64/sb.d: New.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/docs/ddi0596/a/a64-base-instructions-alphabetic-order)
This patch adds the data processing instructions that are new to
ARMv8.5-A.
1) There are 2 instructions: xaflag, axflag, that are added to
manipulate the states of the flag and are used to convert between the
Arm representation and the fcmp representation.
2) The other instructions are rounding instructions which have 8
versions based on whether the floating-point number is a
Single-Precision or Double-Precision number, whether the target
integer is a 32-bit or 64-bit integer and whether the rounding mode is
the ambient rounding mode or to zero. Each of these instruction is
available in both Scalar and Vector forms.
Since both 1) and 2) have separate identification mechanism and it is
permissible that a ARMv8.4 compliant implementation may include any
arbitrary subset of the ARMv8.5 features unless otherwise specified,
new feature bits are added.
*** include/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_FLAGMANIP): New.
(AARCH64_FEATURE_FRINTTS): New.
(AARCH64_ARCH_V8_5): Add both by default.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_feature_flagmanip): New.
(aarch64_feature_frintts): New.
(FLAGMANIP, FRINTTS): New.
(aarch64_opcode_table): Add entries for xaflag, axflag
and frint[32,64][x,z] instructions.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
*** gas/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/armv8_5-a-dp.s: New.
* testsuite/gas/aarch64/armv8_5-a-dp.d: New.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
This is the first of the patch series and adds -march=armv8.5-a and
other internal feature marcos needed for it.
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (aarch64_archs): New entry for armv8.5-a.
* doc/c-aarch64.texi: Add documentation for the same.
*** include/ChnageLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_V8_5): New.
(AARCH64_ARCH_V8_5): New.
*** opcodes/ChangeLog ***
2018-10-09 Sudakshina Das <sudi.das@arm.com>
* aarch64-tbl.h (aarch64_feature_set aarch64_feature_v8_5): New.
(ARMV8_5, V8_5_INSN): New.
This patch, along with previous patches in the series, supports
putting the ELF file header and program headers in a PT_LOAD without
sections.
Logic governing whether headers a loaded has changed a little: The
primary reason to include headers is now the presence of
SIZEOF_HEADERS in a linker script. However, to support scripts that
may have reserved space for headers by hand, we continue to add
headers whenever the first section address is past the end of headers
modulo page size.
include/
* bfdlink.h (struct bfd_link_info): Add load_phdrs field.
bfd/
* elf-nacl.c (nacl_modify_segment_map): Cope with header PT_LOAD
lacking sections.
* elf.c (_bfd_elf_map_sections_to_segments): Assume file and
program headers are required when info->load_phdrs. Reorganize
code handling program headers. Generate a mapping without
sections just for file and program headers when -z separate-code
would indicate they should be on a different page to the first
section.
ld/
* ldexp.c (fold_name <SIZEOF_HEADERS>): Set link_info.load_phdrs.
* testsuite/ld-elf/loadaddr1.d: Pass -z noseparate-code.
* testsuite/ld-elf/loadaddr2.d: Likewise.
* testsuite/ld-i386/vxworks2.sd: Adjust expected output.
* testsuite/ld-powerpc/vxworks2.sd: Likewise.
* testsuite/ld-elf/overlay.d: Remove spu xfail.
* testsuite/ld-spu/ovl.lnk: Don't use SIZEOF_HEADERS.
* testsuite/ld-tic6x/dsbt-be.ld: Likewise.
* testsuite/ld-tic6x/dsbt-inrange.ld: Likewise.
* testsuite/ld-tic6x/dsbt-overflow.ld: Likewise.
* testsuite/ld-tic6x/dsbt.ld: Likewise.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
This patch adds the Execution and Data Prediction Restriction
instructions (that is, cfprctx, dvprxtc, cpprctx). These are all
aliases to MCR and are disassembled as such.
This instruction is retrospectively made optional for all versions of
the architecture from ARMv8.0 to ARMv8.4 and is mandatory from
ARMv8.5. Hence adding a new +predres for older versions of the
architecture.
*** include/ChangeLog ***
2018-10-05 Sudakshina Das <sudi.das@arm.com>
* opcode/arm.h (ARM_EXT2_PREDRES): New.
(ARM_ARCH_V8_5A): Add ARM_EXT2_PREDRES by default.
*** gas/ChangeLog ***
2018-10-05 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (arm_ext_predres): New.
(insns): Add new cfprctx, dvprctx and cpprctx instructions.
(arm_extensions): Add "predres".
* doc/c-arm.texi: Document the above.
* testsuite/gas/arm/predres-bad.d: New test.
* testsuite/gas/arm/predres-bad.l: New test.
* testsuite/gas/arm/predres.s: New test.
* testsuite/gas/arm/predres1.d: New test.
* testsuite/gas/arm/predres2.d: New test.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
This patch adds the instruction SB. This instruction is
retrospectively made optional for all versions of the architecture
from ARMv8.0 to ARMv8.4 and is mandatory from ARMv8.5. Hence adding a
new "+sb" for older archtectures.
*** include/ChangeLog ***
2018-10-05 Sudakshina Das <sudi.das@arm.com>
* opcode/arm.h (ARM_EXT2_SB): New.
(ARM_ARCH_V8_5A): Add ARM_EXT2_SB by default.
*** opcodes/ChangeLog ***
2018-10-05 Sudakshina Das <sudi.das@arm.com>
* arm-dis.c (arm_opcodes): Add sb.
(thumb32_opcodes): Likewise.
*** gas/ChangeLog ***
2018-10-05 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (arm_ext_sb): New.
(insns): Add new sb instruction.
(arm_extensions): Add "sb".
* doc/c-arm.texi: Document the above.
* testsuite/gas/arm/sb-bad.d: New test.
* testsuite/gas/arm/sb-bad.l: New test.
* testsuite/gas/arm/sb-thumb1.d: New test.
* testsuite/gas/arm/sb-thumb2.d: New test.
* testsuite/gas/arm/sb.s: New test.
* testsuite/gas/arm/sb1.d: New test.
* testsuite/gas/arm/sb2.d: New test.
This patch is part of the patch series to add support for ARMv8.5-A
extensions.
(https://developer.arm.com/products/architecture/cpu-architecture/a-profile/exploration-tools)
This is the first of the patch series and adds -march=armv8.5-a and
other internal feature marcos needed for it.
*** gas/ChangeLog ***
2018-10-05 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (arm_archs): New entry for armv8.5-a.
(cpu_arch_ver): Likewise.
* doc/c-arm.texi: Add documentation for the same.
* testsuite/gas/arm/attr-march-armv8_5-a.d: New.
*** include/ChnageLog ***
2018-10-05 Sudakshina Das <sudi.das@arm.com>
* opcode/arm.h (ARM_EXT2_V8_5A): New.
(ARM_AEXT2_V8_5A, ARM_ARCH_V8_5A): New.
This patch adds the new instruction and relocation as per proposal:
https://openrisc.io/proposals/ladrp
This is to be added to the spec in an upcoming revision. The new instruction
l.adrp loads the page offset of the current instruction offset by
a 21-bit immediate shifted left 13-bits. This is meant to be used with
a 13-bit lower bit page offset. This allows us to free up the got
register r16.
l.adrp r3, foo
l.ori r4, r3, po(foo)
l.lbz r5, po(foo)(r3)
l.sb po(foo)(r3), r6
The relocations we add are:
- BFD_RELOC_OR1K_PLTA26 For PLT jump relocation with PLT entry
asm: plta() implemented using l.ardp, meaning
no need for r16 (the GOT reg)
- BFD_RELOC_OR1K_GOT_PG21 Upper 21-bit Page offset got address
asm: got()
- BFD_RELOC_OR1K_TLS_GD_PG21 Upper 21-bit Page offset with TLS General
asm: tlsgd() Dynamic calculation
- BFD_RELOC_OR1K_TLS_LDM_PG21 Upper 21-bit Page offset with TLS local
asm: tlsldm() dynamic calculation
- BFD_RELOC_OR1K_TLS_IE_PG21 Upper 21-bit Page offset with TLS Initial
asm: gottp() Executable calculation
- BFD_RELOC_OR1K_PCREL_PG21 Default relocation for disp21 (l.adrp
instructions)
- BFD_RELOC_OR1K_LO13 low 13-bit page offset relocation
asm: po() i.e. mem loads, addi etc
- BFD_RELOC_OR1K_SLO13 low 13-bit page offset relocation
asm: po() i.e. mem stores, with split immediate
- BFD_RELOC_OR1K_GOT_LO13, low 13-bit page offset with GOT calcs
asm: gotpo()
- BFD_RELOC_OR1K_TLS_GD_LO13 Lower 13-bit offset with TLS GD calcs
asm: tlsgdpo()
- BFD_RELOC_OR1K_TLS_LDM_LO13 Lower 13-bit offset with TLS LD calcs
asm: tlsldmpo()
- BFD_RELOC_OR1K_TLS_IE_LO13 Lower 13-bit offset with TLS IE calcs
asm: gottppo()
bfd/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* bfd-in2.h: Regenerated.
* elf32-or1k.c: (or1k_elf_howto_table): Fix formatting for
R_OR1K_PLT26, Add R_OR1K_PCREL_PG21, R_OR1K_GOT_PG21,
R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21, R_OR1K_TLS_IE_PG21,
R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13, R_OR1K_TLS_LDM_LO13,
R_OR1K_TLS_IE_LO13, R_OR1K_SLO13, R_OR1K_PLTA26.
(or1k_reloc_map): Add BFD_RELOC_OR1K_PCREL_PG21,
BFD_RELOC_OR1K_GOT_PG21, BFD_RELOC_OR1K_TLS_GD_PG21,
BFD_RELOC_OR1K_TLS_LDM_PG21, BFD_RELOC_OR1K_TLS_IE_PG21,
BFD_RELOC_OR1K_LO13, BFD_RELOC_OR1K_GOT_LO13,
BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_GD_LO13,
BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_LO13,
BFD_RELOC_OR1K_SLO13, BFD_RELOC_OR1K_PLTA26.
(elf_or1k_link_hash_table): Add field saw_plta.
(or1k_final_link_relocate): Add value calculations for new relocations.
(or1k_elf_relocate_section): Add section relocations for new
relocations.
(or1k_write_plt_entry): New function.
(or1k_elf_finish_dynamic_sections): Add support for PLTA relocations
using new l.adrp instruction. Cleanup PLT relocation code generation.
* libbfd.h: Regenerated.
* reloc.c: Add BFD_RELOC_OR1K_PCREL_PG21, BFD_RELOC_OR1K_LO13,
BFD_RELOC_OR1K_SLO13, BFD_RELOC_OR1K_GOT_PG21, BFD_RELOC_OR1K_GOT_LO13,
BFD_RELOC_OR1K_PLTA26, BFD_RELOC_OR1K_TLS_GD_PG21,
BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_PG21,
BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_PG21,
BFD_RELOC_OR1K_TLS_IE_LO13.
cpu/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* or1k.opc (parse_disp26): Add support for plta() relocations.
(parse_disp21): New function.
(or1k_rclass): New enum.
(or1k_rtype): New enum.
(or1k_imm16_relocs): Define new PO and SPO relocation mappings.
(parse_reloc): Add new po(), gotpo() and gottppo() for LO13 relocations.
(parse_imm16): Add support for the new 21bit and 13bit relocations.
* or1korbis.cpu (f-disp26): Don't assume SI.
(f-disp21): New pc-relative 21-bit 13 shifted to right.
(insn-opcode): Add ADRP.
(l-adrp): New instruction.
gas/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* config/tc-or1k.c (or1k_apply_fix): Add BFD_RELOC_OR1K_TLS_GD_PG21,
BFD_RELOC_OR1K_TLS_GD_LO13, BFD_RELOC_OR1K_TLS_LDM_PG21,
BFD_RELOC_OR1K_TLS_LDM_LO13, BFD_RELOC_OR1K_TLS_IE_PG21,
BFD_RELOC_OR1K_TLS_IE_LO13.
* testsuite/gas/or1k/allinsn.s: Add test for l.adrp.
* testsuite/gas/or1k/allinsn.d: Add test results for new
instructions.
* testsuite/gas/or1k/reloc-1.s: Add tests to generate
R_OR1K_PLTA26, R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21,
R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13, R_OR1K_TLS_GD_LO13,
R_OR1K_TLD_LDM_LO13, R_OR1K_TLS_IE_LO13, R_OR1K_LO13, R_OR1K_SLO13
relocations.
* testsuite/gas/or1k/reloc-1.d: Add relocation results for
tests.
* testsuite/gas/or1k/reloc-2.s: Add negative tests for store to
gotpo().
* testsuite/gas/or1k/reloc-2.l: Add expected error test results.
ld/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* testsuite/ld-or1k/or1k.exp: Add test cases for plt generation.
* testsuite/ld-or1k/plt1.dd: New file.
* testsuite/ld-or1k/plt1.s: New file.
* testsuite/ld-or1k/plt1.x.dd: New file.
* testsuite/ld-or1k/plta1.dd: New file.
* testsuite/ld-or1k/plta1.s: New file.
* testsuite/ld-or1k/pltlib.s: New file.
include/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* elf/or1k.h (elf_or1k_reloc_type): Add R_OR1K_PCREL_PG21,
R_OR1K_GOT_PG21, R_OR1K_TLS_GD_PG21, R_OR1K_TLS_LDM_PG21,
R_OR1K_TLS_IE_PG21, R_OR1K_LO13, R_OR1K_GOT_LO13,
R_OR1K_TLS_GD_LO13, R_OR1K_TLS_LDM_LO13, R_OR1K_TLS_IE_LO13,
R_OR1K_SLO13, R_OR1K_PLTA26.
opcodes/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* or1k-asm.c: Regenerated.
* or1k-desc.c: Regenerated.
* or1k-desc.h: Regenerated.
* or1k-dis.c: Regenerated.
* or1k-ibld.c: Regenerated.
* or1k-opc.c: Regenerated.
* or1k-opc.h: Regenerated.
* or1k-opinst.c: Regenerated.
This patch adds the following target relocations:
- BFD_RELOC_HI16_S High 16-bit relocation, for used with signed
asm: ha() lower.
- BFD_RELOC_HI16_S_GOTOFF High 16-bit GOT offset relocation for local
asm: gotoffha() symbols, for use with signed lower.
- BFD_RELOC_OR1K_TLS_IE_AHI16 High 16-bit TLS relocation with initial
asm: gottpoffha() executable calculation, for use with signed
lower.
- BFD_RELOC_OR1K_TLS_LE_AHI16 High 16-bit TLS relocation for local executable
asm: tpoffha() variables, for use with signed lower.
- BFD_RELOC_OR1K_SLO16 Split lower 16-bit relocation, used with
asm: lo() OpenRISC store instructions.
- BFD_RELOC_OR1K_GOTOFF_SLO16 Split lower 16-bit GOT offset relocation for
asm: gotofflo() local symbols, used with OpenRISC store
instructions.
- BFD_RELOC_OR1K_TLS_LE_SLO16 Split lower 16-bit relocation for TLS local
asm: tpofflo() executable variables, used with OpenRISC store
instructions.
bfd/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
Stafford Horne <shorne@gmail.com>
* bfd-in2.h: Regenerated.
* elf32-or1k.c (N_ONES): New macro.
(or1k_elf_howto_table): Fix R_OR1K_PLT26 to complain on overflow.
Add definitions for R_OR1K_TLS_TPOFF, R_OR1K_TLS_DTPOFF,
R_OR1K_TLS_DTPMOD, R_OR1K_AHI16, R_OR1K_GOTOFF_AHI16,
R_OR1K_TLS_IE_AHI16, R_OR1K_TLS_LE_AHI16, R_OR1K_SLO16,
R_OR1K_GOTOFF_SLO16, R_OR1K_TLS_LE_SLO16.
(or1k_reloc_map): Add entries for BFD_RELOC_HI16_S,
BFD_RELOC_LO16_GOTOFF, BFD_RELOC_HI16_GOTOFF, BFD_RELOC_HI16_S_GOTOFF,
BFD_RELOC_OR1K_TLS_IE_AHI16, BFD_RELOC_OR1K_TLS_LE_AHI16,
BFD_RELOC_OR1K_SLO16, BFD_RELOC_OR1K_GOTOFF_SLO16,
BFD_RELOC_OR1K_TLS_LE_SLO16.
(or1k_reloc_type_lookup): Change search loop to start ad index 0 and
also check results before returning.
(or1k_reloc_name_lookup): Simplify loop to use R_OR1K_max as index
limit.
(or1k_final_link_relocate): New function.
(or1k_elf_relocate_section): Add support for new AHI and SLO
relocations. Use or1k_final_link_relocate instead of generic
_bfd_final_link_relocate.
(or1k_elf_check_relocs): Add support for new AHI and SLO relocations.
* reloc.c: Add new enums for BFD_RELOC_OR1K_SLO16,
BFD_RELOC_OR1K_GOTOFF_SLO16, BFD_RELOC_OR1K_TLS_IE_AHI16,
BFD_RELOC_OR1K_TLS_IE_AHI16, BFD_RELOC_OR1K_TLS_LE_AHI16,
BFD_RELOC_OR1K_TLS_LE_SLO16. Remove unused BFD_RELOC_OR1K_GOTOFF_HI16
and BFD_RELOC_OR1K_GOTOFF_LO16.
* libbfd.h: Regenerated.
cpu/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* or1k.opc: Add RTYPE_ enum.
(INVALID_STORE_RELOC): New string.
(or1k_imm16_relocs): New array array.
(parse_reloc): New static function that just does the parsing.
(parse_imm16): New static function for generic parsing.
(parse_simm16): Change to just call parse_imm16.
(parse_simm16_split): New function.
(parse_uimm16): Change to call parse_imm16.
(parse_uimm16_split): New function.
* or1korbis.cpu (simm16-split): Change to use new simm16_split.
(uimm16-split): Change to use new uimm16_split.
gas/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* testsuite/gas/or1k/allinsn.d (l_ha): Add result for ha() relocation.
* testsuite/gas/or1k/allinsn.s (l_ha): Add test for ha() relocations.
* testsuite/gas/or1k/allinsn.exp: Renamed to or1k.exp.
* testsuite/gas/or1k/or1k.exp: Add reloc-2 list test.
* testsuite/gas/or1k/reloc-1.d: New file.
* testsuite/gas/or1k/reloc-1.s: New file.
* testsuite/gas/or1k/reloc-2.l: New file.
* testsuite/gas/or1k/reloc-2.s: New file.
include/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* elf/or1k.h (elf_or1k_reloc_type): Add R_OR1K_AHI16,
R_OR1K_GOTOFF_AHI16, R_OR1K_TLS_IE_AHI16, R_OR1K_TLS_LE_AHI16,
R_OR1K_SLO16, R_OR1K_GOTOFF_SLO16, R_OR1K_TLS_LE_SLO16.
ld/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* testsuite/ld-or1k/offsets1.d: New file.
* testsuite/ld-or1k/offsets1.s: New file.
* testsuite/ld-or1k/or1k.exp: New file.
opcodes/ChangeLog:
yyyy-mm-dd Richard Henderson <rth@twiddle.net>
* or1k-asm.c: Regenerate.
This patch adds the verification rules for move prefix constraints.
The Arm SVE instruction MOVPRFX introduces[1] constraints on the instruction at
PC+4. Particularly the following constraints are handled by this patch
* MOVPRFX must be followed by an instruction.
* MOVPRFX can only be followed by non-layout altering directives.
* MOVPRFX destination register MUST be used as the destination register in the
instruction at PC+4, and is not allowed to be used in any other position other than
destructive input. This includes registers that architecturally overlap. e.g. x1
should be treated as z1.
* MOVPRFX must be followed by a restricted set of SVE instructions.
* The size of the destination register of MOVPRFX must be equal to that of
the operation at PC+4.
* The predicate register and operation of MOVPRFX must match that of the instruction
at PC+4
* The predicated instruction at PC+4 must use the merging predicate.
* Architectural aliases and pseudo-instructions need to be supported as well.
* MOVPRFX cannot be the last instruction in a sequence
Any failure to adhere to any of these constrains will emit an assembly warning
and a disassembly note.
[1] https://developer.arm.com/docs/ddi0584/latest/arm-architecture-reference-manual-supplement-the-scalable-vector-extension-sve-for-armv8-a
include/
* opcode/aarch64.h (aarch64_inst): Remove.
(enum err_type): Add ERR_VFI.
(aarch64_is_destructive_by_operands): New.
(init_insn_sequence): New.
(aarch64_decode_insn): Remove param name.
opcodes/
* aarch64-opc.c (init_insn_block): New.
(verify_constraints, aarch64_is_destructive_by_operands): New.
* aarch64-opc.h (verify_constraints): New.
gas/
* config/tc-aarch64.c (output_operand_error_report): Order warnings.
The current verifiers only take an instruction description and encoded value as
arguments. This was enough when the verifiers only needed to do simple checking
but it's insufficient for the purposes of validating instruction sequences.
This patch adds the required arguments and also a flag to allow a verifier to
distinguish between whether it's being run during encoding or decoding. It also
allows for errors and warnings to be returned by a verifier instead of a simple
pass/fail.
include/
* opcode/aarch64.h (struct aarch64_opcode): Expand verifiers to take
more arguments.
opcodes/
* aarch64-dis.c (aarch64_opcode_decode): Update verifier call.
* aarch64-opc.c (verify_ldpsw): Update arguments.
Previously the ERR_ values were defined as different constants, to make this a
bit more type safe and so they can be more easily re-used I'm changing them into
an actual enum and updating any usages.
include/
* opcode/aarch64.h (enum err_type): New.
(aarch64_decode_insn): Use it.
opcodes/
* aarch64-dis.c (ERR_OK, ERR_UND, ERR_UNP, ERR_NYI): Remove.
(aarch64_decode_insn, print_insn_aarch64_word): Use err_type.
This patch introduces aarch64_instr_sequence which is a structure similar to IT
blocks on Arm in order to track instructions that introduce a constraint or
dependency on instruction 1..N positions away from the instruction that opened
the block.
The struct is also wired through to the locations that require it.
gas/
* config/tc-aarch64.c (now_instr_sequence):
(*insn_sequence, now_instr_sequence): New.
(output_operand_error_record, do_encode): Add insn_sequence.
(md_assemble): Update insn_sequence.
(try_to_encode_as_unscaled_ldst, fix_mov_imm_insn, fix_insn):
Pass insn_sequence.
* config/tc-aarch64.h (struct aarch64_segment_info_type):
Add insn_sequence.
include/
* opcode/aarch64.h (struct aarch64_instr_sequence): New.
(aarch64_opcode_encode): Use it.
opcodes/
* aarch64-asm.c (aarch64_opcode_encode): Add insn_sequence.
* aarch64-dis.c (insn_sequence): New.
This patch series is to allow certain instructions such as the SVE MOVPRFX
instruction to apply a constraint/dependency on the instruction at PC+4.
This patch starts this off by marking which instructions impose the constraint
and which instructions must adhere to the constraint. This is done in a
generic way by extending the verifiers.
* The constraint F_SCAN indicates that an instruction opens a sequence and imposes
a constraint on an instructions following it. The length of the sequence depends
on the instruction itself and it handled in the verifier code.
* The C_SCAN_MOVPRFX flag is used to indicate which constrain the instruction is
checked against. An instruction with both F_SCAN and C_SCAN_MOVPRFX starts a
block for the C_SCAN_MOVPRFX instruction, and one with only C_SCAN_MOVPRFX must
adhere to a previous block constraint is applicable.
The SVE instructions in this list have been marked according to the SVE
specification[1].
[1] https://developer.arm.com/docs/ddi0584/latest/arm-architecture-reference-manual-supplement-the-scalable-vector-extension-sve-for-armv8-a
include/
* opcode/aarch64.h (struct aarch64_opcode): Add constraints,
extend flags field size.
(F_SCAN, C_SCAN_MOVPRFX, C_MAX_ELEM): New.
opcodes/
* aarch64-tbl.h (CORE_INSN, __FP_INSN, SIMD_INSN, CRYP_INSN, _CRC_INSN,
_LSE_INSN, _LOR_INSN, RDMA_INSN, FF16_INSN, SF16_INSN, V8_2_INSN,
_SVE_INSN, V8_3_INSN, CNUM_INSN, RCPC_INSN, SHA2_INSN, AES_INSN,
V8_4_INSN, SHA3_INSN, SM4_INSN, FP16_V8_2_INSN, DOT_INSN): Initialize
constraints.
(_SVE_INSNC): New.
(struct aarch64_opcode): (fjcvtzs, ldpsw, ldpsw, esb, psb): Initialize
constraints.
(movprfx): Change _SVE_INSN into _SVE_INSNC, add C_SCAN_MOVPRFX and
F_SCAN flags.
(msb, mul, neg, not, orr, rbit, revb, revh, revw, sabd, scvtf,
sdiv, sdivr, sdot, smax, smin, smulh, splice, sqadd, sqdecd, sqdech,
sqdecp, sqdecw, sqincd, sqinch, sqincp, sqincw, sqsub, sub, subr, sxtb,
sxth, sxtw, uabd, ucvtf, udiv, udivr, udot, umax, umin, umulh, uqadd,
uqdecd, uqdech, uqdecp, uqdecw, uqincd, uqinch, uqincp, uqincw, uqsub,
uxtb, uxth, uxtw, bic, eon, orn, mov, fmov): Change _SVE_INSN into _SVE_INSNC and add
C_SCAN_MOVPRFX and C_MAX_ELEM constraints.
The RISC-V memory model has been ratified, and it includes an additional
fence: "fence.tso". This pseudo instruction extends one of the
previously reserved full fence patterns to be less restrictive, and
therefor will execute correctly on all existing microarchitectures.
Thus there is no reason to allow this instruction to be disabled (or
unconverted to a full fence), so it's just unconditionally allowed.
I've added a test case for GAS to check that "fence.tso" correctly
assembles on rv32i-based targets. I checked to see that "fence.tso"
appears in "gas.log", but that's the only testing I've done.
gas/ChangeLog
2018-10-02 Palmer Dabbelt <palmer@sifive.com>
* testsuite/gas/riscv/fence-tso.d: New file.
* testsuite/gas/riscv/fence-tso.s: Likewise.
include/ChangeLog
2018-10-02 Palmer Dabbelt <palmer@sifive.com>
* opcode/riscv-opc.h (MATCH_FENCE_TSO): New define.
(MASK_FENCE_TSO): Likewise.
opcodes/ChangeLog
2018-10-02 Palmer Dabbelt <palmer@sifive.com>
* riscv-opc.c (riscv_opcodes) <fence.tso>: New opcode.
We shouldn't include zero size sections at start of PT_NOTE segment,
similar to PT_DYNAMIC segment.
PR binutils/23694
* include/elf/internal.h (ELF_SECTION_IN_SEGMENT_1): Don't
include zero size sections at start of PT_NOTE segment.
We have not only removed all unsupported and obsolete code, but also supported lost of new features,
including better link-time relaxations and TLS implementations. Besides, the files generated by the
newly assembler and linker usually get higher performance and more optimized code size.
ld * emultempl/nds32elf.em (hyper_relax): New variable.
(nds32_elf_create_output_section_statements):
the parameters of bfd_elf32_nds32_set_target_option
(PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS,
PARSE_AND_LIST_ARGS_CASES): Add new option --mhyper-relax.
* emultempl/nds32elf.em (nds32_elf_after_open): Updated.
* emultempl/nds32elf.em (tls_desc_trampoline): New variable.
* (nds32_elf_create_output_section_statements): Updated.
* (nds32_elf_after_parse): Disable relaxations when PIC is enable.
* (PARSE_AND_LIST_PROLOGUE, PARSE_AND_LIST_OPTIONS,
PARSE_AND_LIST_ARGS_CASES): Add new option --m[no-]tlsdesc-trampoline.
include * elf/nds32.h: Remove the unused target features.
* dis-asm.h (disassemble_init_nds32): Declared.
* elf/nds32.h (E_NDS32_NULL): Removed.
(E_NDS32_HAS_DSP_INST, E_NDS32_HAS_ZOL): New.
* opcode/nds32.h: Ident.
(N32_SUB6, INSN_LW): New macros.
(enum n32_opcodes): Updated.
* elf/nds32.h: Doc fixes.
* elf/nds32.h: Add R_NDS32_LSI.
* elf/nds32.h: Add new relocations for TLS.
gas * config/tc-nds32.c: Remove the unused target features.
(nds32_relax_relocs, md_pseudo_table, nds32_elf_record_fixup_exp,
nds32_set_elf_flags_by_insn, nds32_insert_relax_entry,
nds32_apply_fix): Likewise.
(nds32_no_ex9_begin): Removed.
* config/tc-nds32.c (add_mapping_symbol_for_align,
make_mapping_symbol, add_mapping_symbol): New functions.
* config/tc-nds32.h (enum mstate): New.
(nds32_segment_info_type): Likewise.
* configure.ac (--enable-dsp-ext, --enable-zol-ext): New options.
* config.in: Regenerated.
* configure: Regenerated.
* config/tc-nds32.c (nds32_dx_regs):
Set the value according to the configuration.
(nds32_perf_ext, nds32_perf_ext2, nds32_string_ext, nds32_audio_ext):
Likewise.
(nds32_dsp_ext): New variable. Set the value according to the
configuration.
(nds32_zol_ext): Likewise.
(asm_desc, nds32_pseudo_opcode_table): Make them static.
(nds32_set_elf_flags_by_insn): Updated.
(nds32_check_insn_available): Updated.
(nds32_str_tolower): New function.
* config/tc-nds32.c (relax_table): Updated.
(md_begin): Updated.
(md_assemble): Use XNEW macro to allocate space for `insn.info',
and then remember to free it.
(md_section_align): Cast (-1) to ValueT.
(nds32_get_align): Cast (~0U) to addressT.
(nds32_relax_branch_instructions): Updated.
(md_convert_frag): Add new local variable `final_r_type'.
(invalid_prev_frag): Add new bfd_boolean parameter `relax'.
All callers changed.
* config/tc-nds32.c (struct nds32_relocs_pattern): Add `insn' field.
(struct nds32_hint_map): Add `option_list' field.
(struct suffix_name, suffix_table): Remove the unused `pic' field.
(do_pseudo_b, do_pseudo_bal): Remove the suffix checking.
(do_pseudo_la_internal, do_pseudo_pushpopm): Indent.
(relax_hint_bias, relax_hint_id_current): New static variables.
(reset_bias, relax_hint_begin): New variables.
(nds_itoa): New function.
(CLEAN_REG, GET_OPCODE): New macros.
(struct relax_hint_id): New.
(nds32_relax_hint): For .relax_hint directive, we can use `begin'
and `end' to mark the relax pattern without giving exactly id number.
(nds32_elf_append_relax_relocs): Handle the case that the .relax_hint
directives are attached to pseudo instruction.
(nds32_elf_save_pseudo_pattern): Change the second parameter from
instruction's opcode to byte code.
(nds32_elf_build_relax_relation): Add new bfd_boolean parameter
`pseudo_hint'.
(nds32_lookup_pseudo_opcode): Fix the overflow issue.
(enum nds32_insn_type): Add N32_RELAX_ALU1 and N32_RELAX_16BIT.
(nds32_elf_record_fixup_exp, relax_ls_table, hint_map,
nds32_find_reloc_table, nds32_match_hint_insn, nds32_parse_name):
Updated.
* config/tc-nds32.h (MAX_RELAX_NUM): Extend it to 6.
(enum nds32_relax_hint_type): Merge NDS32_RELAX_HINT_LA and
NDS32_RELAX_HINT_LS into NDS32_RELAX_HINT_LALS. Add
NDS32_RELAX_HINT_LA_PLT, NDS32_RELAX_HINT_LA_GOT and
NDS32_RELAX_HINT_LA_GOTOFF.
* config/tc-nds32.h (relax_ls_table): Add floating load/store
to gp relax pattern.
(hint_map, nds32_find_reloc_table): Likewise.
* configure.ac: Define NDS32_LINUX_TOOLCHAIN.
* configure: Regenerated.
* config.in: Regenerated.
* config/tc-nds32.h (enum nds32_ramp): Updated.
(enum nds32_relax_hint_type): Likewise.
* config/tc-nds32.c: Include "errno.h" and "limits.h".
(relax_ls_table): Add TLS relax patterns.
(nds32_elf_append_relax_relocs): Attach BFD_RELOC_NDS32_GROUP on
each instructions of TLS patterns.
(nds32_elf_record_fixup_exp): Updated.
(nds32_apply_fix): Likewise.
(suffix_table): Add TLSDESC suffix.
binutils* testsuite/binutils-all/objcopy.exp: Set the unsupported reloc number
from 215 to 255 for NDS32.
bfd * elf32-nds32.c (nds32_elf_relax_loadstore):
Remove the unused target features.
(bfd_elf32_nds32_set_target_option): Remove the unused parameters.
(nds32_elf_relax_piclo12, nds32_elf_relax_letlslo12,
nds32_elf_relax_letlsadd, nds32_elf_relax_letlsls,
nds32_elf_relax_pltgot_suff, nds32_elf_relax_got_suff
nds32_elf_relax_gotoff_suff, calculate_plt_memory_address,
calculate_plt_offset, calculate_got_memory_address,
nds32_elf_check_dup_relocs): Removed.
All callers changed.
* elf32-nds32.h: Remove the unused macros and defines.
(elf_nds32_link_hash_table): Remove the unused variable.
(bfd_elf32_nds32_set_target_option): Update prototype.
(nds32_elf_ex9_init): Removed.
* elf32-nds32.c (nds32_convert_32_to_16): Updated.
* elf32-nds32.c (HOWTO2, HOWTO3): Define new HOWTO macros
to initialize array nds32_elf_howto_table in any order
without lots of EMPTY_HOWTO.
(nds32_reloc_map): Updated.
* reloc.c: Add BFD_RELOC_NDS32_LSI.
* bfd-in2.h: Regenerated.
* bfd/libbfd.h: Regenerated.
* elf32-nds32.c (nds32_elf_relax_howto_table): Add R_NDS32_LSI.
(nds32_reloc_map): Likewise.
(nds32_elf_relax_flsi): New function.
(nds32_elf_relax_section): Support floating load/store relaxation.
* elf32-nds32.c (NDS32_GUARD_SEC_P, elf32_nds32_local_gp_offset):
New macro.
(struct elf_nds32_link_hash_entry): New `offset_to_gp' field.
(struct elf_nds32_obj_tdata): New `offset_to_gp' and `hdr_size' fields.
(elf32_nds32_allocate_local_sym_info, nds32_elf_relax_guard,
nds32_elf_is_target_special_symbol, nds32_elf_maybe_function_sym):
New functions.
(nds32_info_to_howto_rel): Add BFD_ASSERT.
(bfd_elf32_bfd_reloc_type_table_lookup, nds32_elf_link_hash_newfunc,
nds32_elf_link_hash_table_create, nds32_elf_relocate_section,
nds32_elf_relax_loadstore, nds32_elf_relax_lo12, nds32_relax_adjust_label,
bfd_elf32_nds32_set_target_option, nds32_fag_mark_relax): Updated.
(nds32_elf_final_sda_base): Improve it to find the better gp value.
(insert_nds32_elf_blank): Must consider `len' when inserting blanks.
* elf32-nds32.h (bfd_elf32_nds32_set_target_option): Update prototype.
(struct elf_nds32_link_hash_table): Add new variable `hyper_relax'.
* elf32-nds32.c (elf32_nds32_allocate_dynrelocs): New function.
(create_got_section): Likewise.
(allocate_dynrelocs, nds32_elf_size_dynamic_sections,
nds32_elf_relocate_section, nds32_elf_finish_dynamic_symbol): Updated.
(nds32_elf_check_relocs): Fix the issue that the shared library may
has TEXTREL entry in the dynamic section.
(nds32_elf_create_dynamic_sections): Enable to call readonly_dynrelocs
since the TEXTREL issue is fixed in the nds32_elf_check_relocs.
(nds32_elf_finish_dynamic_sections): Update and add DT_RELASZ
dynamic entry.
(calculate_offset): Remove the unused parameter `pic_ext_target' and
related codes.
All callers changed.
(elf_backend_dtrel_excludes_plt): Disable it temporarily since it
will cause some errors for our test cases.
* elf32-nds32.c (nds32_elf_merge_private_bfd_data): Allow to link the
generic object.
* reloc.c: Add TLS relocations.
* libbfd.h: Regenerated.
* bfd-in2.h: Regenerated.
* elf32-nds32.h (struct section_id_list_t): New.
(elf32_nds32_lookup_section_id, elf32_nds32_check_relax_group,
elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model):
New prototypes.
(elf32_nds32_compute_jump_table_size, elf32_nds32_local_tlsdesc_gotent):
New macro.
(nds32_insertion_sort, bfd_elf32_nds32_set_target_option,
elf_nds32_link_hash_table): Updated.
* elf32-nds32.c (enum elf_nds32_tls_type): New.
(struct elf32_nds32_relax_group_t, struct relax_group_list_t): New.
(elf32_nds32_add_dynreloc, patch_tls_desc_to_ie, get_tls_type,
fls, ones32, list_insert, list_insert_sibling, dump_chain,
elf32_nds32_check_relax_group, elf32_nds32_lookup_section_id,
elf32_nds32_unify_relax_group, nds32_elf_unify_tls_model): New functions.
(elf_nds32_obj_tdata): Add new fields.
(elf32_nds32_relax_group_ptr, nds32_elf_local_tlsdesc_gotent): New macros.
(nds32_elf_howto_table): Add TLS relocations.
(nds32_reloc_map): Likewise.
(nds32_elf_copy_indirect_symbol, nds32_elf_size_dynamic_sections,
nds32_elf_finish_dynamic_symbol, elf32_nds32_allocate_local_sym_info,
nds32_elf_relocate_section, bfd_elf32_nds32_set_target_option,
nds32_elf_check_relocs, allocate_dynrelocs): Updated.
(nds32_elf_relax_section): Call nds32_elf_unify_tls_model.
(dtpoff_base): Rename it to `gottpof' and then update it.
opcodes * nds32-asm.c (operand_fields): Remove the unused fields.
(nds32_opcodes): Remove the unused instructions.
* nds32-dis.c (nds32_ex9_info): Removed.
(nds32_parse_opcode): Updated.
(print_insn_nds32): Likewise.
* nds32-asm.c (config.h, stdlib.h, string.h): New includes.
(LEX_SET_FIELD, LEX_GET_FIELD): Update defines.
(nds32_asm_init, build_operand_hash_table, build_keyword_hash_table,
build_opcode_hash_table): New functions.
(nds32_keyword_table, nds32_keyword_count_table, nds32_field_table,
nds32_opcode_table): New.
(hw_ktabs): Declare it to a pointer rather than an array.
(build_hash_table): Removed.
* nds32-asm.h (enum): Add SYN_INPUT, SYN_OUTPUT, SYN_LOPT,
SYN_ROPT and upadte HW_GPR and HW_INT.
* nds32-dis.c (keywords): Remove const.
(match_field): New function.
(nds32_parse_opcode): Updated.
* disassemble.c (disassemble_init_for_target):
Add disassemble_init_nds32.
* nds32-dis.c (eum map_type): New.
(nds32_private_data): Likewise.
(get_mapping_symbol_type, is_mapping_symbol, nds32_symbol_is_valid,
nds32_add_opcode_hash_table, disassemble_init_nds32): New functions.
(print_insn_nds32): Updated.
* nds32-asm.c (parse_aext_reg): Add new parameter.
(parse_re, parse_re2, parse_aext_reg): Only reduced registers
are allowed to use.
All callers changed.
* nds32-asm.c (keyword_usr, keyword_sr): Updated.
(operand_fields): Add new fields.
(nds32_opcodes): Add new instructions.
(keyword_aridxi_mx): New keyword.
* nds32-asm.h (enum): Add NASM_ATTR_DSP_ISAEXT, HW_AEXT_ARIDXI_MX
and NASM_ATTR_ZOL.
(ALU2_1, ALU2_2, ALU2_3): New macros.
* nds32-dis.c (nds32_filter_unknown_insn): Updated.
Currently, three tests FAIL on Solaris 11.4+ (amd64-pc-solaris2.11 and
sparcv9-sun-solaris2.11):
info auxv
[...]
2009 AT_SUN_HWCAP Machine-dependent CPU capability hints 0x3f5ff7
2023 ??? 0x0
0 AT_NULL End of vector 0x0
(gdb) WARNING: Unrecognized tag value: 2023 ??? 0x0
FAIL: gdb.base/auxv.exp: info auxv on live process
info auxv
4294969310 ??? 0x7fffbfffe410
9225589753816 ??? 0x7fffbfffe45c
[...]
WARNING: Unrecognized tag value: 4294969310 ??? 0x7fffbfffe410
WARNING: Unrecognized tag value: 9225589753816 ??? 0x7fffbfffe45c
WARNING: Unrecognized tag value: 140733193388037 ??? 0x6
[...]
2009 AT_SUN_HWCAP Machine-dependent CPU capability hints 0x3f5ff7
2023 ??? 0x0
0 AT_NULL End of vector 0x0
(gdb) WARNING: Unrecognized tag value: 2023 ??? 0x0
UNRESOLVED: gdb.base/auxv.exp: info auxv on native core dump
info auxv
[...]
2009 AT_SUN_HWCAP Machine-dependent CPU capability hints 0x3f5ff7
2023 ??? 0x0
0 AT_NULL End of vector 0x0
(gdb) WARNING: Unrecognized tag value: 2023 ??? 0x0
FAIL: gdb.base/auxv.exp: info auxv on gcore-created dump
The following patch fixes this by introducing the missing AT_SUN_*
values from Solaris 11.4+ <sys/auxv.h>. This lets the live and
gcore-created dump tests PASS.
I don't know yet what's the reason for those weird 'Unrecognized tag
value' warnings with native core dumps is; elfdump -n certainly doesn't
show them. However, native core dumps still need quite some work
(mostly in bfd) in this and other areas.
Tested on amd64-pc-solaris2.11.
gdb:
* auxv.c (default_print_auxv_entry): Reflect AT_SUN_CAP_HW1
renaming.
Handle AT_SUN_EMULATOR, AT_SUN_BRANDNAME, AT_SUN_BRAND_AUX1,
AT_SUN_BRAND_AUX2, AT_SUN_BRAND_AUX3, AT_SUN_CAP_HW2.
include:
* elf/common.h (AT_SUN_HWCAP): Rename to ...
(AT_SUN_CAP_HW1): ... this. Retain old name for backward
compatibility.
(AT_SUN_EMULATOR, AT_SUN_BRANDNAME, AT_SUN_BRAND_AUX1)
(AT_SUN_BRAND_AUX2, AT_SUN_BRAND_AUX3, AT_SUN_CAP_HW2): Define.
commit 3322c5d9a1 ("Remove unneeded explicit .o targets") broke the
build with clang, because -Wno-format-nonliteral was in fact needed.
This patch fixes the problem by introducing
DIAGNOSTIC_IGNORE_FORMAT_NONLITERAL and using it in printcmd.c. This
seems preferable to reverting the patch because now the warning
suppression is more targeted.
gdb/ChangeLog
2018-09-05 Simon Marchi <simon.marchi@ericsson.com>
* printcmd.c (printf_c_string): Use
DIAGNOSTIC_IGNORE_FORMAT_NONLITERAL.
(printf_wide_c_string, printf_pointer, ui_printf): Likewise.
include/ChangeLog
2018-09-05 Simon Marchi <simon.marchi@ericsson.com>
* diagnostics.h (DIAGNOSTIC_IGNORE_FORMAT_NONLITERAL): New macro.
2018-08-29 Kito Cheng <kito@andestech.com>
gas/
* config/tc-riscv.c (riscv_subset_supports): New argument:
xlen_required.
(riscv_multi_subset_supports): New function, able to check more
than one extension.
(riscv_ip): Use riscv_multi_subset_supports instead of
riscv_subset_supports.
(riscv_set_arch): Update call-site for riscv_subset_supports.
(riscv_after_parse_args): Likewise.
include/
*opcode/riscv.h (MAX_SUBSET_NUM): New.
(riscv_opcode): Add xlen_requirement field and change type of
subset.
opcodes/
* riscv-dis.c (riscv_disassemble_insn): Check XLEN by
riscv_opcode.xlen_requirement.
* riscv-opc.c (riscv_opcodes): Update for struct change.
The older linker treats .note.gnu.property section as a generic note
and just concatenates all .note.gnu.property sections from the input
to the output. On CET-enabled OS, the output of the older linker is
marked as CET enabled, but in fact, it is not CET enabled and it crashes
on CET-enabled machines.
This patch defines GNU_PROPERTY_X86_UINT32_VALID. Linker is updated to
set the GNU_PROPERTY_X86_UINT32_VALID bit in GNU property note for
non-relocatable output to differentiate outputs from the older linker.
bfd/
* elfxx-x86.c (_bfd_x86_elf_parse_gnu_properties): Mask out the
GNU_PROPERTY_X86_UINT32_VALID bit.
(_bfd_x86_elf_link_fixup_gnu_properties): Set the
GNU_PROPERTY_X86_UINT32_VALID bit for non-relocatable output.
binutils/
* readelf.c (print_gnu_property_note): Check the
GNU_PROPERTY_X86_UINT32_VALID bit for invalid GNU property note.
include/
* elf/common.h (GNU_PROPERTY_X86_UINT32_VALID): New.
* bfd/elf32-s12z.c: (opru18_reloc): New function.
* bfd/elf32-s12z.c: (elf_s12z_howto_table): Adjust Howto according to new knowledge.
* include/elf/s12z.h: Rename R_S12Z_UKNWN_3 to R_S12Z_EXT18.
Most optional operands to powerpc instructions use a default value of
zero, but there are a few exceptions. Those have been handled by
PPC_OPERAND_OPTIONAL_VALUE and an entry in the powerpc_operands table
for the default value, smuggled in the shift field. This patch
changes that to using the operand extract function to provide non-zero
defaults.
I've also moved the code determining whether optional operands are
provided or omitted, to the point the first optional operand is seen,
and allowed for the possibility of optional base register operands
in a future patch.
The patch does change the error you get on invalid assembly like
ld 3,4
You'll now see "missing operand" rather than
"syntax error; end of line, expected `('".
gas/
* config/tc-ppc.c (md_assemble): Delay counting of optional
operands until one is encountered. Allow for the possibility
of optional base regs, ie. PPC_OPERAND_PARENS. Call
ppc_optional_operand_value with extra args.
include/
* opcode/ppc.h (struct powerpc_operand): Correct "insert" comment.
Mention use of "extract" function to provide default value.
(PPC_OPERAND_OPTIONAL_VALUE): Delete.
(ppc_optional_operand_value): Rewrite to use extract function.
opcodes/
* ppc-dis.c (operand_value_powerpc): Init "invalid".
(skip_optional_operands): Count optional operands, and update
ppc_optional_operand_value call.
* ppc-opc.c (extract_dxdn): Remove ATTRIBUTE_UNUSED from used arg.
(extract_vlensi): Likewise.
(extract_fxm): Return default value for missing optional operand.
(extract_ls, extract_raq, extract_tbr): Likewise.
(insert_sxl, extract_sxl): New functions.
(insert_esync, extract_esync): Remove Power9 handling and simplify.
(powerpc_operands <FXM4, TBR>): Delete PPC_OPERAND_OPTIONAL_VALUE
flag and extra entry.
(powerpc_operands <SXL>): Likewise, and use insert_sxl and
extract_sxl.
opcodes/
* s12z.h: Delete.
* s12z-dis.c: Adjust path of included file.
include/
* opcode/s12z.h: New file.
gas/
* config/tc-s12z.c: Adjust path of included file.
This patch adds a few comments to include/elf/arm.h to clarify which
versions of the ARM ELF specification defined which headers. Given
that the EABI is pretty ubiquitous these days, I've marked anything
not based on that as deprecated.
There are no plans to remove any deprecated definitions at this time,
but any new development shouldn't be building upon support for
deprecated definitions remaining in the long term.
* elf/arm.h: Updated comments for e_flags definitions.
2018-07-26 Martin Liska <mliska@suse.cz>
PR lto/86548
* libiberty.h (make_temp_file_with_prefix): New function.
2018-07-26 Martin Liska <mliska@suse.cz>
PR lto/86548
* make-temp-file.c (TEMP_FILE): Remove leading 'cc'.
(make_temp_file): Call make_temp_file_with_prefix with
first argument set to NULL.
(make_temp_file_with_prefix): Support also prefix.
git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@262999 138bc75d-0d04-0410-961f-82ee72b054a4
This patch series is a new binutils port for C-SKY processors, including support for both the V1 and V2 processor variants. V1 is derived from the MCore architecture while V2 is substantially different, with mixed 16- and 32-bit instructions, a larger register set, a different (but overlapping) ABI, etc. There is support for bare-metal ELF targets and Linux with both glibc and uClibc.
This code is being contributed jointly by C-SKY Microsystems and Mentor Graphics. C-SKY is responsible for the technical content and has proposed Lifang Xia and Yunhai Shang as port maintainers. (Note that C-SKY does have a corporate copyright assignment on file with the FSF.) Mentor Graphics' role has been cleaning up the code, adding documentation and additional test cases, etc, to address issues we anticipated reviewers would complain about.
bfd * Makefile.am (ALL_MACHINES, ALL_MACHINES_CFILES): Add C-SKY.
(BFD32_BACKENDS, BFD_BACKENDS_CFILES): Likewise.
* Makefile.in: Regenerated.
* archures.c (enum bfd_architecture): Add bfd_arch_csky and
related bfd_mach defines.
(bfd_csky_arch): Declare.
(bfd_archures_list): Add C-SKY.
* bfd-in.h (elf32_csky_build_stubs): Declare.
(elf32_csky_size_stubs): Declare.
(elf32_csky_next_input_section: Declare.
(elf32_csky_setup_section_lists): Declare.
* bfd-in2.h: Regenerated.
* config.bfd: Add C-SKY.
* configure.ac: Likewise.
* configure: Regenerated.
* cpu-csky.c: New file.
* elf-bfd.h (enum elf_target_id): Add C-SKY.
* elf32-csky.c: New file.
* libbfd.h: Regenerated.
* reloc.c: Add C-SKY relocations.
* targets.c (csky_elf32_be_vec, csky_elf32_le_vec): Declare.
(_bfd_target_vector): Add C-SKY target vector entries.
binutils* readelf.c: Include elf/csky.h.
(guess_is_rela): Handle EM_CSKY.
(dump_relocations): Likewise.
(get_machine_name): Likewise.
(is_32bit_abs_reloc): Likewise.
include * dis-asm.h (csky_symbol_is_valid): Declare.
* opcode/csky.h: New file.
opcodes * Makefile.am (TARGET_LIBOPCODES_CFILES): Add csky-dis.c.
* Makefile.in: Regenerated.
* configure.ac: Add C-SKY.
* configure: Regenerated.
* csky-dis.c: New file.
* csky-opc.h: New file.
* disassemble.c (ARCH_csky): Define.
(disassembler, disassemble_init_for_target): Add case for ARCH_csky.
* disassemble.h (print_insn_csky, csky_get_disassembler): Declare.
gas * Makefile.am (TARGET_CPU_CFILES): Add entry for C-SKY.
(TARGET_CPU_HFILES, TARGET_ENV_HFILES): Likewise.
* Makefile.in: Regenerated.
* config/tc-csky.c: New file.
* config/tc-csky.h: New file.
* config/te-csky_abiv1.h: New file.
* config/te-csky_abiv1_linux.h: New file.
* config/te-csky_abiv2.h: New file.
* config/te-csky_abiv2_linux.h: New file.
* configure.tgt: Add C-SKY.
* doc/Makefile.am (CPU_DOCS): Add entry for C-SKY.
* doc/Makefile.in: Regenerated.
* doc/all.texi: Set CSKY feature.
* doc/as.texi (Overview): Add C-SKY options.
(Machine Dependencies): Likewise.
* doc/c-csky.texi: New file.
* testsuite/gas/csky/*: New test cases.
ld * Makefile.am (ALL_EMULATION_SOURCES): Add C-SKY emulations.
(ecskyelf.c, ecskyelf_linux.c): New rules.
* Makefile.in: Regenerated.
* configure.tgt: Add C-SKY.
* emulparams/cskyelf.sh: New file.
* emulparams/cskyelf_linux.sh: New file.
* emultempl/cskyelf.em: New file.
* gen-doc.texi: Add C-SKY.
* ld.texi: Likewise.
(Options specific to C-SKY targets): New section.
* testsuite/ld-csky/*: New tests.
Fix an issue with commit 8095d2f70e ("MIPS/GAS: Split Loongson MMI
Instructions from loongson2f/3a"), AFL_ASE_MASK should be 0x0006ffff
instead of 0x0004ffff.
2018-07-27 Chenghua Xu <paul.hua.gm@gmail.com>
Maciej W. Rozycki <macro@linux-mips.org>
include/
* elf/mips.h (AFL_ASE_MASK): Correct typo.
This is a relatively straightforward patch to improve support for the
IBM Gekko and IBM Broadway processors. Broadway is functionally
equivalent to the IBM 750CL, while Gekko's functionality is a subset
of theirs. The patch simplifies this reality and adds -mgekko and
-mbroadway as aliases for -m750cl. I didn't feel it was worth wasting
a PPC_OPCODE_* bit to differentiate Gekko. The patch adds a number of
simplified mnemonics for special purpose register access. Notably,
Broadway adds 4 additional IBAT and DBAT registers but these are not
assigned sequential SPR numbers.
gas/
* config/tc-ppc.c (md_show_usage): Add -mgekko and -mbroadway.
* doc/as.texi (Target PowerPC options): Add -mgekko and -mbroadway.
* doc/c-ppc.texi (PowerPC-Opts): Likewise.
* testsuite/gas/ppc/broadway.d,
* testsuite/gas/ppc/broadway.s: New test for broadway.
* testsuite/gas/ppc/ppc.exp: Run new test.
include/
* opcode/ppc.h (PPC_OPCODE_750): Adjust comment.
opcodes/
* ppc-dis.c (ppc_opts): Add -mgekko and -mbroadway.
(powerpc_init_dialect): Handle bfd_mach_ppc_750.
* ppc-opc.c (insert_sprbat, extract_sprbat): New functions to
support disjointed BAT.
(powerpc_operands): Allow extra bit in SPRBAT_MASK. Add SPRGQR.
(XSPRGQR_MASK, GEKKO, BROADWAY): Define.
(powerpc_opcodes): Add 750cl extended mnemonics for spr access.
This adds support for ".localentry 1", a new st_other
STO_PPC64_LOCAL_MASK encoding that signifies a function with a single
entry point like ".localentry 0", but unlike a ".localentry 0"
function does not preserve r2.
include/
* elf/ppc64.h: Specify byte offset to local entry for values
of two to six in STO_PPC64_LOCAL_MASK. Clarify r2 return
value for such functions when entering via global entry point.
Specify meaning of a value of one in STO_PPC64_LOCAL_MASK.
bfd/
* elf64-ppc.c (ppc64_elf_size_stubs): Use a ppc_stub_long_branch_r2off
for calls to symbols with STO_PPC64_LOCAL_MASK bits set to 1.
gas/
* config/tc-ppc.c (ppc_elf_localentry): Allow .localentry values
of 1 and 7 to directly set value into STO_PPC64_LOCAL_MASK bits.
ld/testsuite/
* ld-powerpc/elfv2.s: Add .localentry f5,1 testcase.
* ld-powerpc/elfv2exe.d: Update.
* ld-powerpc/elfv2so.d: Update.
The MMI instruction set has been implemented in many Loongson
processors. There is a lot of software optimized for MMI. This patch
splits MMI from loongson2f/3a, and adds GAS and disassembler options for
MMI instructions.
2018-07-20 Chenghua Xu <paul.hua.gm@gmail.com>
Maciej W. Rozycki <macro@mips.com>
bfd/
* elfxx-mips.c (print_mips_ases): Add MMI extension.
binutils/
* readelf.c (print_mips_ases): Add MMI extension.
gas/
* NEWS: Mention MultiMedia extensions Instructions (MMI)
support.
* config/tc-mips.c (options): Add OPTION_LOONGSON_MMI and
OPTION_NO_LOONGSON_MMI.
(md_longopts): Likewise.
(mips_ases): Define availability for MMI.
(mips_convert_ase_flags): Map ASE_LOONGSON_MMI to
AFL_ASE_LOONGSON_MMI.
(mips_cpu_info_table): Add ASE_LOONGSON_MMI for loongson2f/3a.
(md_show_usage): Add help for -mloongson-mmi and
-mno-loongson-mmi.
* doc/as.texi: Document -mloongson-mmi, -mno-loongson-mmi.
* doc/c-mips.texi: Document -mloongson-mmi, -mno-loongson-mmi,
.set loongson-mmi and .set noloongson-mmi.
* testsuite/gas/mips/loongson-2f.d: Move mmi test to ...
* testsuite/gas/mips/loongson-2f-mmi.d: Here. Add ISA/ASE
flag verification.
* testsuite/gas/mips/loongson-2f.s: Move mmi test to ...
* testsuite/gas/mips/loongson-2f-mmi.s: Here.
* testsuite/gas/mips/loongson-3a.d: Move mmi test to ...
* testsuite/gas/mips/loongson-3a-mmi.d: Here. Add ISA/ASE
flag verification.
* testsuite/gas/mips/loongson-3a.s: Move mmi test to ...
* testsuite/gas/mips/loongson-3a-mmi.s: Here.
* testsuite/gas/mips/mips.exp: Run loongson-2f-mmi and
loongson-3a-mmi tests.
include/
* elf/mips.h (AFL_ASE_MMI): New macro.
(AFL_ASE_MASK): Update to include AFL_ASE_LOONGSON_MMI.
* opcode/mips.h (ASE_LOONGSON_MMI): New macro.
opcodes/
* mips-dis.c (mips_arch_choices): Add MMI to loongson2f and
loongson3a descriptors.
(parse_mips_ase_option): Handle -M loongson-mmi option.
(print_mips_disassembler_options): Document -M loongson-mmi.
* mips-opc.c (LMMI): New macro.
(mips_opcodes): Replace IL2F|IL3A marking with LMMI for MMI
instructions.
It is usually possible to tell absolute and ordinary symbols apart in
BFD throughout the link, by checking whether the section that owns the
symbol is absolute or not.
That however does not work for ordinary symbols defined in a linker
script outside an output section statement. Initially such symbols are
entered into to the link hash as absolute symbols, owned by the absolute
section. A flag is set in the internal linker expression defining such
symbols to tell the linker to convert them to section-relative ones in
the final phase of the link. That flag is however not accessible to BFD
linker code, including BFD target code in particular.
Add a flag to the link hash then to copy the information held in the
linker expression. Define a macro, `bfd_is_abs_symbol', for BFD code to
use where determining whether a symbol is absolute or ordinary is
required before the final link phase.
This macro will correctly identify the special `__ehdr_start' symbol as
ordinary throughout link, for example, even though early on it will be
assigned to the absolute section. Of course this does not let BFD code
identify what the symbol's ultimate section will be before the final
link phase has converted this symbol (in `update_definedness').
include/
* bfdlink.h (bfd_link_hash_entry): Add `rel_from_abs' member.
bfd/
* linker.c (bfd_is_abs_symbol): New macro.
* bfd-in2.h: Regenerate.
ld/
* ldexp.c (exp_fold_tree_1) <etree_assign, etree_provide>
<etree_provided>: Copy expression's `rel_from_abs' flag to the
link hash.
Fixes a number of build errors like the following
.../elf32-arm.c: In function 'elf32_arm_nabi_write_core_note':
.../elf32-arm.c:2177: error: #pragma GCC diagnostic not allowed inside functions
.../elf32-arm.c:2186: error: #pragma GCC diagnostic not allowed inside functions
See the comment in diagnostics.h.
include/
* diagnostics.h: Comment on macro usage.
bfd/
* elf32-arm.c (elf32_arm_nabi_write_core_note): Don't use
DIAGNOTIC_PUSH and DIAGNOSTIC_POP unconditionally.
* elf32-ppc.c (ppc_elf_write_core_note): Likewise.
* elf32-s390.c (elf_s390_write_core_note): Likewise.
* elf64-ppc.c (ppc64_elf_write_core_note): Likewise.
* elf64-s390.c (elf_s390_write_core_note): Likewise.
* elfxx-aarch64.c (_bfd_aarch64_elf_write_core_note): Likewise.
This patch silences this warning:
/Users/simark/src/binutils-gdb/gdb/darwin-nat.c:839:10: error: 'syscall' is deprecated: first deprecated in macOS 10.12 - syscall(2) is unsupported; please switch to a supported interface. For SYS_kdebug_trace use kdebug_signpost(). [-Werror,-Wdeprecated-declarations]
res = syscall (SYS___pthread_kill, thread->gdb_port, nsignal);
^
/usr/include/unistd.h:745:6: note: 'syscall' has been explicitly marked deprecated here
int syscall(int, ...);
^
The comment of the new pthread_kill function explains why we use the
syscall function directly.
include/ChangeLog:
* diagnostics.h (DIAGNOSTIC_IGNORE_DEPRECATED_DECLARATIONS):
Define for clang.
gdb/ChangeLog:
* darwin-nat.c (darwin_pthread_kill): New function.
(darwin_resume_thread): Use darwin_pthread_kill.
Implement MIPS target support for passing options to the disassembler,
complementing commit 65b48a8140 ("GDB: Add support for the new
set/show disassembler-options commands.").
This includes options that expect an argument, so adjust the generic
code and data structures used so as to handle such options. So as to
give backends syntax flexibility no specific delimiter has been defined
to separate options from their respective arguments, so it has to be
included as the last character of the option name. Completion code
however has not been adjusted and consequently option arguments cannot
be completed at this time.
Also the MIPS target has non-empty defaults for the options, so that ABI
names for the general-purpose registers respect our `set mips abi ...'
setting rather than always being determined from the ELF headers of the
binary file selected. Handle these defaults as implicit options, never
shown to the user and always prepended to the user-specified options, so
that the latters can override the defaults.
The resulting output for the MIPS target is as follows:
(gdb) show disassembler-options
The current disassembler options are ''
The following disassembler options are supported for use with the
'set disassembler-options <option>[,<option>...]' command:
no-aliases Use canonical instruction forms.
msa Recognize MSA instructions.
virt Recognize the virtualization ASE instructions.
xpa Recognize the eXtended Physical Address (XPA) ASE
instructions.
ginv Recognize the Global INValidate (GINV) ASE instructions.
gpr-names=ABI Print GPR names according to specified ABI.
Default: based on binary being disassembled.
fpr-names=ABI Print FPR names according to specified ABI.
Default: numeric.
cp0-names=ARCH Print CP0 register names according to specified architecture.
Default: based on binary being disassembled.
hwr-names=ARCH Print HWR names according to specified architecture.
Default: based on binary being disassembled.
reg-names=ABI Print GPR and FPR names according to specified ABI.
reg-names=ARCH Print CP0 register and HWR names according to specified
architecture.
For the options above, the following values are supported for "ABI":
numeric 32 n32 64
For the options above, the following values are supported for "ARCH":
numeric r3000 r3900 r4000 r4010 vr4100 vr4111 vr4120 r4300 r4400 r4600
r4650 r5000 vr5400 vr5500 r5900 r6000 rm7000 rm9000 r8000 r10000 r12000
r14000 r16000 mips5 mips32 mips32r2 mips32r3 mips32r5 mips32r6 mips64
mips64r2 mips64r3 mips64r5 mips64r6 interaptiv-mr2 sb1 loongson2e
loongson2f loongson3a octeon octeon+ octeon2 octeon3 xlr xlp
(gdb)
which corresponds to what `objdump --help' used to print for the MIPS
target, with minor formatting changes, most notably option argument
lists being wrapped, but also the amount of white space separating
options from the respective descriptions. The relevant part the new
code is now also used by `objdump --help', which means these formatting
changes apply to both outputs, except for argument list wrapping, which
is GDB-specific.
This also adds a separating new line between the heading and option
lists where descriptions are provided, hence:
(gdb) set architecture s390:31-bit
(gdb) show disassembler-options
The current disassembler options are ''
The following disassembler options are supported for use with the
'set disassembler-options <option>[,<option>...]' command:
esa Disassemble in ESA architecture mode
zarch Disassemble in z/Architecture mode
insnlength Print unknown instructions according to length from first two bits
(gdb)
but:
(gdb) set architecture powerpc:common
(gdb) show disassembler-options
The current disassembler options are ''
The following disassembler options are supported for use with the
'set disassembler-options <option>[,<option>...]' command:
403, 405, 440, 464, 476, 601, 603, 604, 620, 7400, 7410, 7450, 7455, 750cl,
821, 850, 860, a2, altivec, any, booke, booke32, cell, com, e200z4, e300,
e500, e500mc, e500mc64, e5500, e6500, e500x2, efs, efs2, power4, power5,
power6, power7, power8, power9, ppc, ppc32, 32, ppc64, 64, ppc64bridge,
ppcps, pwr, pwr2, pwr4, pwr5, pwr5x, pwr6, pwr7, pwr8, pwr9, pwrx, raw, spe,
spe2, titan, vle, vsx
(gdb)
Existing affected target backends have been adjusted accordingly.
This has been verified manually with:
(gdb) set architecture arm
(gdb) set architecture powerpc:common
(gdb) set architecture s390:31-bit
to cause no issues with the `show disassembler-options' and `set
disassembler-options' commands. A test case for the MIPS target has
also been provided, covering the default settings with ABI overrides as
well as disassembler option overrides.
2018-07-02 Maciej W. Rozycki <macro@mips.com>
Simon Marchi <simon.marchi@polymtl.ca>
include/
PR tdep/8282
* dis-asm.h (disasm_option_arg_t): New typedef.
(disasm_options_and_args_t): Likewise.
(disasm_options_t): Add `arg' member, document members.
(disassembler_options_mips): New prototype.
(disassembler_options_arm, disassembler_options_powerpc)
(disassembler_options_s390): Update prototypes.
opcodes/
PR tdep/8282
* mips-dis.c (mips_option_arg_t): New enumeration.
(mips_options): New variable.
(disassembler_options_mips): New function.
(print_mips_disassembler_options): Reimplement in terms of
`disassembler_options_mips'.
* arm-dis.c (disassembler_options_arm): Adapt to using the
`disasm_options_and_args_t' structure.
* ppc-dis.c (disassembler_options_powerpc): Likewise.
* s390-dis.c (disassembler_options_s390): Likewise.
gdb/
PR tdep/8282
* disasm.h (gdb_disassembler): Add
`m_disassembler_options_holder'. member
* disasm.c (get_all_disassembler_options): New function.
(gdb_disassembler::gdb_disassembler): Use it.
(gdb_buffered_insn_length_init_dis): Likewise.
(gdb_buffered_insn_length): Adjust accordingly.
(set_disassembler_options): Handle options with arguments.
(show_disassembler_options_sfunc): Likewise. Add a leading new
line if showing options with descriptions.
(disassembler_options_completer): Adapt to using the
`disasm_options_and_args_t' structure.
* mips-tdep.c (mips_disassembler_options): New variable.
(mips_disassembler_options_o32): Likewise.
(mips_disassembler_options_n32): Likewise.
(mips_disassembler_options_n64): Likewise.
(gdb_print_insn_mips): Don't set `disassembler_options'.
(gdb_print_insn_mips_n32, gdb_print_insn_mips_n64): Remove
functions.
(mips_gdbarch_init): Always set `gdbarch_print_insn' to
`gdb_print_insn_mips'. Set `gdbarch_disassembler_options',
`gdbarch_disassembler_options_implicit' and
`gdbarch_valid_disassembler_options'.
* arm-tdep.c (_initialize_arm_tdep): Adapt to using the
`disasm_options_and_args_t' structure.
* gdbarch.sh (disassembler_options_implicit): New `gdbarch'
method.
(valid_disassembler_options): Switch from `disasm_options_t' to
the `disasm_options_and_args_t' structure.
* NEWS: Document `set disassembler-options' support for the MIPS
target.
* gdbarch.h: Regenerate.
* gdbarch.c: Regenerate.
gdb/doc/
PR tdep/8282
* gdb.texinfo (Source and Machine Code): Document `set
disassembler-options' support for the MIPS target.
gdb/testsuite/
PR tdep/8282
* gdb.arch/mips-disassembler-options.exp: New test.
* gdb.arch/mips-disassembler-options.s: New test source.
Some instructions in Armv8-a place a limitation on FP16 registers that can be
used as the register from which to select an element from.
e.g. fmla restricts Rm to 4 bits when using an FP16 register. This restriction
does not apply for all instructions, e.g. fcmla does not have this restriction
as it gets an extra bit from the M field.
Unfortunately, this restriction to S_H was added for all _Em operands before,
meaning for a large number of instructions you couldn't use the full register
file.
This fixes the issue by introducing a new operand _Em16 which applies this
restriction only when paired with S_H and leaves the _Em and the other
qualifiers for _Em16 unbounded (i.e. using the full 5 bit range).
Also the patch updates all instructions that should be affected by this.
opcodes/
PR binutils/23192
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
* aarch64-dis.c (aarch64_ext_reglane): Add AARCH64_OPND_Em16 constraint.
* aarch64-opc.c (operand_general_constraint_met_p,
aarch64_print_operand): Likewise.
* aarch64-tbl.h (aarch64_opcode_table): Change Em to Em16 for smlal,
smlal2, fmla, fmls, fmul, fmulx, sqrdmlah, sqrdlsh, fmlal, fmlsl,
fmlal2, fmlsl2.
(AARCH64_OPERANDS): Add Em2.
gas/
PR binutils/23192
* config/tc-aarch64.c (process_omitted_operand, parse_operands): Add
AARCH64_OPND_Em16
* testsuite/gas/aarch64/advsimd-armv8_3.s: Expand tests to cover upper
16 registers.
* testsuite/gas/aarch64/advsimd-armv8_3.d: Likewise.
* testsuite/gas/aarch64/advsimd-compnum.s: Likewise.
* testsuite/gas/aarch64/advsimd-compnum.d: Likewise.
* testsuite/gas/aarch64/sve.d: Likewise.
include/
PR binutils/23192
*opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_Em16.
For sections that are not SHT_NOBITS, use sh_offset and p_offset instead of
sh_addr and p_vaddr when calculating if a section fits in a segment. Both
methods are valid when using the GNU linker.
include/
* elf/internal.h (ELF_SECTION_IN_SEGMENT): Don’t check addresses
for non SHT_NOBITS.
Add support for the Global INValidate Application Specific Extension
for Release 6 of the MIPS Architecture.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 187-191
bfd/
* elfxx-mips.c (print_mips_ases): Add GINV extension.
binutils/
* readelf.c (print_mips_ases): Add GINV extension.
gas/
* NEWS: Mention MIPS Global INValidate ASE support.
* config/tc-mips.c (options): Add OPTION_GINV and OPTION_NO_GINV.
(md_longopts): Likewise.
(mips_ases): Define availability for GINV.
(mips_convert_ase_flags): Map ASE_GINV to AFL_ASE_GINV.
(md_show_usage): Add help for -mginv and -mno-ginv.
* doc/as.texinfo: Document -mginv, -mno-ginv.
* doc/c-mips.texi: Document -mginv, -mno-ginv, .set ginv and
.set noginv.
* testsuite/gas/mips/ase-errors-1.s: Add error checks for GINV
ASE.
* testsuite/gas/mips/ase-errors-2.s: Likewise.
* testsuite/gas/mips/ase-errors-1.l: Likewise.
* testsuite/gas/mips/ase-errors-2.l: Likewise.
* testsuite/gas/mips/ginv.d: New test.
* testsuite/gas/mips/ginv-err.d: New test.
* testsuite/gas/mips/ginv-err.l: New test stderr output.
* testsuite/gas/mips/ginv.s: New test source.
* testsuite/gas/mips/ginv-err.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
include/
* elf/mips.h (AFL_ASE_GINV, AFL_ASE_RESERVED1): New macros.
(AFL_ASE_MASK): Update to include AFL_ASE_GINV.
* opcode/mips.h: Document "+\" operand format.
(ASE_GINV): New macro.
opcodes/
* mips-dis.c (mips_arch_choices): Add GINV to mips32r6 and
mips64r6 descriptors.
(parse_mips_ase_option): Handle -Mginv option.
(print_mips_disassembler_options): Document -Mginv.
* mips-opc.c (decode_mips_operand) <+\>: New operand format.
(GINV): New macro.
(mips_opcodes): Define ginvi and ginvt.
Add support for the CRC Application Specific Extension for Release 6 of
the MIPS Architecture.
[1] "MIPS Architecture for Programmers Volume II-A: The MIPS32
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00086, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 143-148
[2] "MIPS Architecture for Programmers Volume II-A: The MIPS64
Instruction Set Manual", Imagination Technologies Ltd., Document
Number: MD00087, Revision 6.06, December 15, 2016, Section 3.2
"Alphabetical List of Instructions", pp. 165-170
ChangeLog:
bfd/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* elfxx-mips.c (print_mips_ases): Add CRC.
binutils/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* readelf.c (print_mips_ases): Add CRC.
gas/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
Maciej W. Rozycki <macro@mips.com>
* config/tc-mips.c (options): Add OPTION_CRC and OPTION_NO_CRC.
(md_longopts): Likewise.
(md_show_usage): Add help for -mcrc and -mno-crc.
(mips_ases): Define availability for CRC and CRC64.
(mips_convert_ase_flags): Map ASE_CRC to AFL_ASE_CRC.
* doc/as.texinfo: Document -mcrc, -mno-crc.
* doc/c-mips.texi: Document -mcrc, -mno-crc, .set crc and
.set no-crc.
* testsuite/gas/mips/ase-errors-1.l: Add error checks for CRC
ASE.
* testsuite/gas/mips/ase-errors-2.l: Likewise.
* testsuite/gas/mips/ase-errors-1.s: Likewise.
* testsuite/gas/mips/ase-errors-2.s: Likewise.
* testsuite/gas/mips/crc.d: New test.
* testsuite/gas/mips/crc64.d: New test.
* testsuite/gas/mips/crc-err.d: New test.
* testsuite/gas/mips/crc64-err.d: New test.
* testsuite/gas/mips/crc-err.l: New test stderr output.
* testsuite/gas/mips/crc64-err.l: New test stderr output.
* testsuite/gas/mips/crc.s: New test source.
* testsuite/gas/mips/crc64.s: New test source.
* testsuite/gas/mips/crc-err.s: New test source.
* testsuite/gas/mips/crc64-err.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
include/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* elf/mips.h (AFL_ASE_CRC): New macro.
(AFL_ASE_MASK): Update to include AFL_ASE_CRC.
* opcode/mips.h (ASE_CRC): New macro.
* opcode/mips.h (ASE_CRC64): Likewise.
opcodes/
2018-06-13 Scott Egerton <scott.egerton@imgtec.com>
Faraz Shahbazker <Faraz.Shahbazker@mips.com>
* mips-dis.c (mips_arch_choices): Add CRC and CRC64 ASEs.
* mips-opc.c (CRC, CRC64): New macros.
(mips_builtin_opcodes): Define crc32b, crc32h, crc32w,
crc32cb, crc32ch and crc32cw for CRC. Define crc32d and
crc32cd for CRC64.
xtensa disassembler does not use information from the .xt.prop sections
to switch between code/data disassembly in text sections. This may
result in incorrect disassembly when data is interpreted as code and
disassembler loses synchronization with instruction stream. Use .xt.prop
section information to correctly interpret code and data and synchronize
with instruction stream.
2018-06-04 Max Filippov <jcmvbkbc@gmail.com>
bfd/
* elf32-xtensa.c (xtensa_read_table_entries): Make global.
(compute_fill_extra_space): Drop declaration. Rename function to
xtensa_compute_fill_extra_space.
(compute_ebb_actions, remove_dead_literal): Update references to
compute_fill_extra_space.
include/
* elf/xtensa.h (xtensa_read_table_entries)
(xtensa_compute_fill_extra_space): New declarations.
opcodes/
* xtensa-dis.c (bfd.h, elf/xtensa.h): New includes.
(dis_private): Add new fields for property section tracking.
(xtensa_coalesce_insn_tables, xtensa_find_table_entry)
(xtensa_instruction_fits): New functions.
(fetch_data): Bump minimal fetch size to 4.
(print_insn_xtensa): Make struct dis_private static.
Load and prepare property table on section change.
Don't disassemble literals. Don't disassemble instructions that
cross property table boundaries.
Move gdb/common/diagnostics.h to include/diagnostics.h so that it can
be used in binutils.
gdb/
* ada-lex.l: Include "diagnostics.h" instead of
"common/diagnostics.h".
* unittests/environ-selftests.c: Likewise.
* common/diagnostics.h: Moved to ../include.
include/
* diagnostics.h: Moved from ../gdb/common/diagnostics.h.
bfd * Makefile.am: Add s12z files.
* Makefile.in: Regenerate.
* archures.c: Add bfd_s12z_arch.
* bfd-in.h: Add exports of bfd_putb24 and bfd_putl24.
* bfd-in2.h: Regenerate.
* config.bfd: Add s12z target.
* configure.ac: Add s12z target.
* configure: Regenerate.
* cpu-s12z.c: New file.
* elf32-s12z.c: New file.
* libbfd.c (bfd_putb24): New function.
(bfd_putl24): New function.
* libbfd.h: Regenerate.
* reloc.c: Add s12z relocations.
(bfd_get_reloc_size): Handle size 5 relocs.
* targets.c: Add s12z_elf32_vec.
opcodes * Makefile.am: Add support for s12z architecture.
* configure.ac: Likewise.
* disassemble.c: Likewise.
* disassemble.h: Likewise.
* Makefile.in: Regenerate.
* configure: Regenerate.
* s12z-dis.c: New file.
* s12z.h: New file.
include * elf/s12z.h: New header.
ld * Makefile.am: Add support for s12z architecture.
* configure.tgt: Likewise.
* Makefile.in: Regenerate.
* emulparams/m9s12zelf.sh: New file.
* scripttempl/elfm9s12z.sc: New file.
* testsuite/ld-discard/static.d: Expect to fail for the s12z
target.
* testsuite/ld-elf/endsym.d: Likewise.
* testsuite/ld-elf/merge.d: Likewise.
* testsuite/ld-elf/pr14926.d: Skip for the s12z target.
* testsuite/ld-elf/sec64k.exp: Likewise.
* testsuite/ld-s12z: New directory.
* testsuite/ld-s12z/opr-linking.d: New file.
* testsuite/ld-s12z/opr-linking.s: New file.
* testsuite/ld-s12z/relative-linking.d: New file.
* testsuite/ld-s12z/relative-linking.s: New file.
* testsuite/ld-s12z/z12s.exp: New file.
gas * Makefile.am: Add support for s12z target.
* Makefile.in: Regenerate.
* NEWS: Mention the new support.
* config/tc-s12z.c: New file.
* config/tc-s12z.h: New file.
* configure.tgt: Add s12z support.
* doc/Makefile.am: Likewise.
* doc/Makefile.in: Regenerate.
* doc/all.texi: Add s12z documentation.
* doc/as.textinfo: Likewise.
* doc/c-s12z.texi: New file.
* testsuite/gas/s12z: New directory.
* testsuite/gas/s12z/abs.d: New file.
* testsuite/gas/s12z/abs.s: New file.
* testsuite/gas/s12z/adc-imm.d: New file.
* testsuite/gas/s12z/adc-imm.s: New file.
* testsuite/gas/s12z/adc-opr.d: New file.
* testsuite/gas/s12z/adc-opr.s: New file.
* testsuite/gas/s12z/add-imm.d: New file.
* testsuite/gas/s12z/add-imm.s: New file.
* testsuite/gas/s12z/add-opr.d: New file.
* testsuite/gas/s12z/add-opr.s: New file.
* testsuite/gas/s12z/and-imm.d: New file.
* testsuite/gas/s12z/and-imm.s: New file.
* testsuite/gas/s12z/and-opr.d: New file.
* testsuite/gas/s12z/and-opr.s: New file.
* testsuite/gas/s12z/and-or-cc.d: New file.
* testsuite/gas/s12z/and-or-cc.s: New file.
* testsuite/gas/s12z/bfext-special.d: New file.
* testsuite/gas/s12z/bfext-special.s: New file.
* testsuite/gas/s12z/bfext.d: New file.
* testsuite/gas/s12z/bfext.s: New file.
* testsuite/gas/s12z/bit-manip.d: New file.
* testsuite/gas/s12z/bit-manip.s: New file.
* testsuite/gas/s12z/bit.d: New file.
* testsuite/gas/s12z/bit.s: New file.
* testsuite/gas/s12z/bra-expression-defined.d: New file.
* testsuite/gas/s12z/bra-expression-defined.s: New file.
* testsuite/gas/s12z/bra-expression-undef.d: New file.
* testsuite/gas/s12z/bra-expression-undef.s: New file.
* testsuite/gas/s12z/bra.d: New file.
* testsuite/gas/s12z/bra.s: New file.
* testsuite/gas/s12z/brclr-symbols.d: New file.
* testsuite/gas/s12z/brclr-symbols.s: New file.
* testsuite/gas/s12z/brset-clr-opr-imm-rel.d: New file.
* testsuite/gas/s12z/brset-clr-opr-imm-rel.s: New file.
* testsuite/gas/s12z/brset-clr-opr-reg-rel.d: New file.
* testsuite/gas/s12z/brset-clr-opr-reg-rel.s: New file.
* testsuite/gas/s12z/brset-clr-reg-imm-rel.d: New file.
* testsuite/gas/s12z/brset-clr-reg-imm-rel.s: New file.
* testsuite/gas/s12z/brset-clr-reg-reg-rel.d: New file.
* testsuite/gas/s12z/brset-clr-reg-reg-rel.s: New file.
* testsuite/gas/s12z/clb.d: New file.
* testsuite/gas/s12z/clb.s: New file.
* testsuite/gas/s12z/clr-opr.d: New file.
* testsuite/gas/s12z/clr-opr.s: New file.
* testsuite/gas/s12z/clr.d: New file.
* testsuite/gas/s12z/clr.s: New file.
* testsuite/gas/s12z/cmp-imm.d: New file.
* testsuite/gas/s12z/cmp-imm.s: New file.
* testsuite/gas/s12z/cmp-opr-inc.d: New file.
* testsuite/gas/s12z/cmp-opr-inc.s: New file.
* testsuite/gas/s12z/cmp-opr-rdirect.d: New file.
* testsuite/gas/s12z/cmp-opr-rdirect.s: New file.
* testsuite/gas/s12z/cmp-opr-reg.d: New file.
* testsuite/gas/s12z/cmp-opr-reg.s: New file.
* testsuite/gas/s12z/cmp-opr-rindirect.d: New file.
* testsuite/gas/s12z/cmp-opr-rindirect.s: New file.
* testsuite/gas/s12z/cmp-opr-sxe4.d: New file.
* testsuite/gas/s12z/cmp-opr-sxe4.s: New file.
* testsuite/gas/s12z/cmp-opr-xys.d: New file.
* testsuite/gas/s12z/cmp-opr-xys.s: New file.
* testsuite/gas/s12z/cmp-s-imm.d: New file.
* testsuite/gas/s12z/cmp-s-imm.s: New file.
* testsuite/gas/s12z/cmp-s-opr.d: New file.
* testsuite/gas/s12z/cmp-s-opr.s: New file.
* testsuite/gas/s12z/cmp-xy.d: New file.
* testsuite/gas/s12z/cmp-xy.s: New file.
* testsuite/gas/s12z/com-opr.d: New file.
* testsuite/gas/s12z/com-opr.s: New file.
* testsuite/gas/s12z/complex-shifts.d: New file.
* testsuite/gas/s12z/complex-shifts.s: New file.
* testsuite/gas/s12z/db-tb-cc-opr.d: New file.
* testsuite/gas/s12z/db-tb-cc-opr.s: New file.
* testsuite/gas/s12z/db-tb-cc-reg.d: New file.
* testsuite/gas/s12z/db-tb-cc-reg.s: New file.
* testsuite/gas/s12z/dbCC.d: New file.
* testsuite/gas/s12z/dbCC.s: New file.
* testsuite/gas/s12z/dec-opr.d: New file.
* testsuite/gas/s12z/dec-opr.s: New file.
* testsuite/gas/s12z/dec.d: New file.
* testsuite/gas/s12z/dec.s: New file.
* testsuite/gas/s12z/div.d: New file.
* testsuite/gas/s12z/div.s: New file.
* testsuite/gas/s12z/eor.d: New file.
* testsuite/gas/s12z/eor.s: New file.
* testsuite/gas/s12z/exg.d: New file.
* testsuite/gas/s12z/exg.s: New file.
* testsuite/gas/s12z/ext24-ld-xy.d: New file.
* testsuite/gas/s12z/ext24-ld-xy.s: New file.
* testsuite/gas/s12z/inc-opr.d: New file.
* testsuite/gas/s12z/inc-opr.s: New file.
* testsuite/gas/s12z/inc.d: New file.
* testsuite/gas/s12z/inc.s: New file.
* testsuite/gas/s12z/inh.d: New file.
* testsuite/gas/s12z/inh.s: New file.
* testsuite/gas/s12z/jmp.d: New file.
* testsuite/gas/s12z/jmp.s: New file.
* testsuite/gas/s12z/jsr.d: New file.
* testsuite/gas/s12z/jsr.s: New file.
* testsuite/gas/s12z/ld-imm-page2.d: New file.
* testsuite/gas/s12z/ld-imm-page2.s: New file.
* testsuite/gas/s12z/ld-imm.d: New file.
* testsuite/gas/s12z/ld-imm.s: New file.
* testsuite/gas/s12z/ld-immu18.d: New file.
* testsuite/gas/s12z/ld-immu18.s: New file.
* testsuite/gas/s12z/ld-large-direct.d: New file.
* testsuite/gas/s12z/ld-large-direct.s: New file.
* testsuite/gas/s12z/ld-opr.d: New file.
* testsuite/gas/s12z/ld-opr.s: New file.
* testsuite/gas/s12z/ld-s-opr.d: New file.
* testsuite/gas/s12z/ld-s-opr.s: New file.
* testsuite/gas/s12z/ld-small-direct.d: New file.
* testsuite/gas/s12z/ld-small-direct.s: New file.
* testsuite/gas/s12z/lea-immu18.d: New file.
* testsuite/gas/s12z/lea-immu18.s: New file.
* testsuite/gas/s12z/lea.d: New file.
* testsuite/gas/s12z/lea.s: New file.
* testsuite/gas/s12z/mac.d: New file.
* testsuite/gas/s12z/mac.s: New file.
* testsuite/gas/s12z/min-max.d: New file.
* testsuite/gas/s12z/min-max.s: New file.
* testsuite/gas/s12z/mod.d: New file.
* testsuite/gas/s12z/mod.s: New file.
* testsuite/gas/s12z/mov.d: New file.
* testsuite/gas/s12z/mov.s: New file.
* testsuite/gas/s12z/mul-imm.d: New file.
* testsuite/gas/s12z/mul-imm.s: New file.
* testsuite/gas/s12z/mul-opr-opr.d: New file.
* testsuite/gas/s12z/mul-opr-opr.s: New file.
* testsuite/gas/s12z/mul-opr.d: New file.
* testsuite/gas/s12z/mul-opr.s: New file.
* testsuite/gas/s12z/mul-reg.d: New file.
* testsuite/gas/s12z/mul-reg.s: New file.
* testsuite/gas/s12z/mul.d: New file.
* testsuite/gas/s12z/mul.s: New file.
* testsuite/gas/s12z/neg-opr.d: New file.
* testsuite/gas/s12z/neg-opr.s: New file.
* testsuite/gas/s12z/not-so-simple-shifts.d: New file.
* testsuite/gas/s12z/not-so-simple-shifts.s: New file.
* testsuite/gas/s12z/opr-18u.d: New file.
* testsuite/gas/s12z/opr-18u.s: New file.
* testsuite/gas/s12z/opr-expr.d: New file.
* testsuite/gas/s12z/opr-expr.s: New file.
* testsuite/gas/s12z/opr-ext-18.d: New file.
* testsuite/gas/s12z/opr-ext-18.s: New file.
* testsuite/gas/s12z/opr-idx-24-reg.d: New file.
* testsuite/gas/s12z/opr-idx-24-reg.s: New file.
* testsuite/gas/s12z/opr-idx3-reg.d: New file.
* testsuite/gas/s12z/opr-idx3-reg.s: New file.
* testsuite/gas/s12z/opr-idx3-xysp-24.d: New file.
* testsuite/gas/s12z/opr-idx3-xysp-24.s: New file.
* testsuite/gas/s12z/opr-indirect-expr.d: New file.
* testsuite/gas/s12z/opr-indirect-expr.s: New file.
* testsuite/gas/s12z/opr-symbol.d: New file.
* testsuite/gas/s12z/opr-symbol.s: New file.
* testsuite/gas/s12z/or-imm.d: New file.
* testsuite/gas/s12z/or-imm.s: New file.
* testsuite/gas/s12z/or-opr.d: New file.
* testsuite/gas/s12z/or-opr.s: New file.
* testsuite/gas/s12z/p2-mul.d: New file.
* testsuite/gas/s12z/p2-mul.s: New file.
* testsuite/gas/s12z/page2-inh.d: New file.
* testsuite/gas/s12z/page2-inh.s: New file.
* testsuite/gas/s12z/psh-pul.d: New file.
* testsuite/gas/s12z/psh-pul.s: New file.
* testsuite/gas/s12z/qmul.d: New file.
* testsuite/gas/s12z/qmul.s: New file.
* testsuite/gas/s12z/rotate.d: New file.
* testsuite/gas/s12z/rotate.s: New file.
* testsuite/gas/s12z/s12z.exp: New file.
* testsuite/gas/s12z/sat.d: New file.
* testsuite/gas/s12z/sat.s: New file.
* testsuite/gas/s12z/sbc-imm.d: New file.
* testsuite/gas/s12z/sbc-imm.s: New file.
* testsuite/gas/s12z/sbc-opr.d: New file.
* testsuite/gas/s12z/sbc-opr.s: New file.
* testsuite/gas/s12z/shift.d: New file.
* testsuite/gas/s12z/shift.s: New file.
* testsuite/gas/s12z/simple-shift.d: New file.
* testsuite/gas/s12z/simple-shift.s: New file.
* testsuite/gas/s12z/single-ops.d: New file.
* testsuite/gas/s12z/single-ops.s: New file.
* testsuite/gas/s12z/specd6.d: New file.
* testsuite/gas/s12z/specd6.s: New file.
* testsuite/gas/s12z/st-large-direct.d: New file.
* testsuite/gas/s12z/st-large-direct.s: New file.
* testsuite/gas/s12z/st-opr.d: New file.
* testsuite/gas/s12z/st-opr.s: New file.
* testsuite/gas/s12z/st-s-opr.d: New file.
* testsuite/gas/s12z/st-s-opr.s: New file.
* testsuite/gas/s12z/st-small-direct.d: New file.
* testsuite/gas/s12z/st-small-direct.s: New file.
* testsuite/gas/s12z/st-xy.d: New file.
* testsuite/gas/s12z/st-xy.s: New file.
* testsuite/gas/s12z/sub-imm.d: New file.
* testsuite/gas/s12z/sub-imm.s: New file.
* testsuite/gas/s12z/sub-opr.d: New file.
* testsuite/gas/s12z/sub-opr.s: New file.
* testsuite/gas/s12z/tfr.d: New file.
* testsuite/gas/s12z/tfr.s: New file.
* testsuite/gas/s12z/trap.d: New file.
* testsuite/gas/s12z/trap.s: New file.
binutils* readelf.c: Add support for s12z architecture.
* testsuite/lib/binutils-common.exp (is_elf_format): Excluse s12z
targets.
This patch adds constraints for read and write only system registers with the
msr and mrs instructions. The code will treat having both flags set and none
set as the same. These flags add constraints that must be matched up. e.g. a
system register with a READ only flag set, can only be used with mrs. If The
constraint fails a warning is emitted.
Examples of the warnings generated:
test.s: Assembler messages:
test.s:5: Warning: specified register cannot be written to at operand 1 -- `msr dbgdtrrx_el0,x3'
test.s:7: Warning: specified register cannot be read from at operand 2 -- `mrs x3,dbgdtrtx_el0'
test.s:8: Warning: specified register cannot be written to at operand 1 -- `msr midr_el1,x3'
and disassembly notes:
0000000000000000 <main>:
0: d5130503 msr dbgdtrtx_el0, x3
4: d5130503 msr dbgdtrtx_el0, x3
8: d5330503 mrs x3, dbgdtrrx_el0
c: d5330503 mrs x3, dbgdtrrx_el0
10: d5180003 msr midr_el1, x3 ; note: writing to a read-only register.
Note that because dbgdtrrx_el0 and dbgdtrtx_el0 have the same encoding, during
disassembly the constraints are use to disambiguate between the two. An exact
constraint match is always prefered over partial ones if available.
As always the warnings can be suppressed with -w and also be made errors using
warnings as errors.
binutils/
PR binutils/21446
* doc/binutils.texi (-M): Document AArch64 options.
gas/
PR binutils/21446
* testsuite/gas/aarch64/illegal-sysreg-2.s: Fix pmbidr_el1 test.
* testsuite/gas/aarch64/illegal-sysreg-2.l: Likewise.
* testsuite/gas/aarch64/illegal-sysreg-2.d: Likewise.
* testsuite/gas/aarch64/sysreg-diagnostic.s: New.
* testsuite/gas/aarch64/sysreg-diagnostic.l: New.
* testsuite/gas/aarch64/sysreg-diagnostic.d: New.
include/
PR binutils/21446
* opcode/aarch64.h (F_SYS_READ, F_SYS_WRITE): New.
opcodes/
PR binutils/21446
* aarch64-asm.c (opintl.h): Include.
(aarch64_ins_sysreg): Enforce read/write constraints.
* aarch64-dis.c (aarch64_ext_sysreg): Likewise.
* aarch64-opc.h (F_DEPRECATED, F_ARCHEXT, F_HASXT): Moved here.
(F_REG_READ, F_REG_WRITE): New.
* aarch64-opc.c (aarch64_print_operand): Generate notes for
AARCH64_OPND_SYSREG.
(F_DEPRECATED, F_ARCHEXT, F_HASXT): Move to aarch64-opc.h.
(aarch64_sys_regs): Add constraints to currentel, midr_el1, ctr_el0,
mpidr_el1, revidr_el1, aidr_el1, dczid_el0, id_dfr0_el1, id_pfr0_el1,
id_pfr1_el1, id_afr0_el1, id_mmfr0_el1, id_mmfr1_el1, id_mmfr2_el1,
id_mmfr3_el1, id_mmfr4_el1, id_isar0_el1, id_isar1_el1, id_isar2_el1,
id_isar3_el1, id_isar4_el1, id_isar5_el1, mvfr0_el1, mvfr1_el1,
mvfr2_el1, ccsidr_el1, id_aa64pfr0_el1, id_aa64pfr1_el1,
id_aa64dfr0_el1, id_aa64dfr1_el1, id_aa64isar0_el1, id_aa64isar1_el1,
id_aa64mmfr0_el1, id_aa64mmfr1_el1, id_aa64mmfr2_el1, id_aa64afr0_el1,
id_aa64afr0_el1, id_aa64afr1_el1, id_aa64zfr0_el1, clidr_el1,
csselr_el1, vsesr_el2, erridr_el1, erxfr_el1, rvbar_el1, rvbar_el2,
rvbar_el3, isr_el1, tpidrro_el0, cntfrq_el0, cntpct_el0, cntvct_el0,
mdccsr_el0, dbgdtrrx_el0, dbgdtrtx_el0, osdtrrx_el1, osdtrtx_el1,
mdrar_el1, oslar_el1, oslsr_el1, dbgauthstatus_el1, pmbidr_el1,
pmsidr_el1, pmswinc_el0, pmceid0_el0, pmceid1_el0.
* aarch64-tbl.h (aarch64_opcode_table): Add constraints to
msr (F_SYS_WRITE), mrs (F_SYS_READ).
This patch adds a new platform option "notes" that can be used to indicate if
disassembly notes should be placed in the disassembly as comments.
These notes can contain information about a failing constraint such as reading
from a write-only register. The disassembly will not be blocked because of this
but -M notes will emit a comment saying that the operation is not allowed.
For assembly this patch adds a new non-fatal status for errors. This is
essentially a warning. The reason for not creating an actual warning type is
that this causes the interaction between the ordering of warnings and errors to
be problematic. Currently the error buffer is almost always filled because of
the way operands are matched during assembly. An earlier template may have put
an error there that would only be displayed if no other template matches or
generates a higher priority error. But by definition a warning is lower
priority than a warning, so the error (which is incorrect if another template
matched) will supersede the warning. By treating warnings as errors and only
later relaxing the severity this relationship keeps working and the existing
reporting infrastructure can be re-used.
binutils/
PR binutils/21446
* doc/binutils.texi (-M): Document AArch64 options.
* NEWS: Document notes and warnings.
gas/
PR binutils/21446
* config/tc-aarch64.c (print_operands): Indicate no notes.
(output_operand_error_record): Support non-fatal errors.
(output_operand_error_report, warn_unpredictable_ldst, md_assemble):
Likewise.
include/
PR binutils/21446
* opcode/aarch64.h (aarch64_operand_error): Add non_fatal.
(aarch64_print_operand): Support notes.
opcodes/
PR binutils/21446
* aarch64-dis.c (no_notes: New.
(parse_aarch64_dis_option): Support notes.
(aarch64_decode_insn, print_operands): Likewise.
(print_aarch64_disassembler_options): Document notes.
* aarch64-opc.c (aarch64_print_operand): Support notes.
This patch if the first patch in a series to add the ability to add constraints
to system registers that an instruction must adhere to in order for the register
to be usable with that instruction.
These constraints can also be used to disambiguate between registers with the
same encoding during disassembly.
This patch adds a new flags entry in the sysreg structures and ensures it is
filled in and read out during assembly/disassembly. It also adds the ability for
the assemble and disassemble functions to be able to gracefully fail and re-use
the existing error reporting infrastructure.
The return type of these functions are changed to a boolean to denote success or
failure and the error structure is passed around to them. This requires
aarch64-gen changes so a lot of the changes here are just mechanical.
gas/
PR binutils/21446
* config/tc-aarch64.c (parse_sys_reg): Return register flags.
(parse_operands): Fill in register flags.
gdb/
PR binutils/21446
* aarch64-tdep.c (aarch64_analyze_prologue,
aarch64_software_single_step, aarch64_displaced_step_copy_insn):
Indicate not interested in errors.
include/
PR binutils/21446
* opcode/aarch64.h (aarch64_opnd_info): Change sysreg to struct.
(aarch64_decode_insn): Accept error struct.
opcodes/
PR binutils/21446
* aarch64-asm.h (aarch64_insert_operand, aarch64_##x): Return boolean
and take error struct.
* aarch64-asm.c (aarch64_ext_regno, aarch64_ins_reglane,
aarch64_ins_reglist, aarch64_ins_ldst_reglist,
aarch64_ins_ldst_reglist_r, aarch64_ins_ldst_elemlist,
aarch64_ins_advsimd_imm_shift, aarch64_ins_imm, aarch64_ins_imm_half,
aarch64_ins_advsimd_imm_modified, aarch64_ins_fpimm,
aarch64_ins_imm_rotate1, aarch64_ins_imm_rotate2, aarch64_ins_fbits,
aarch64_ins_aimm, aarch64_ins_limm_1, aarch64_ins_limm,
aarch64_ins_inv_limm, aarch64_ins_ft, aarch64_ins_addr_simple,
aarch64_ins_addr_regoff, aarch64_ins_addr_offset, aarch64_ins_addr_simm,
aarch64_ins_addr_simm10, aarch64_ins_addr_uimm12,
aarch64_ins_simd_addr_post, aarch64_ins_cond, aarch64_ins_sysreg,
aarch64_ins_pstatefield, aarch64_ins_sysins_op, aarch64_ins_barrier,
aarch64_ins_prfop, aarch64_ins_hint, aarch64_ins_reg_extended,
aarch64_ins_reg_shifted, aarch64_ins_sve_addr_ri_s4xvl,
aarch64_ins_sve_addr_ri_s6xvl, aarch64_ins_sve_addr_ri_s9xvl,
aarch64_ins_sve_addr_ri_s4, aarch64_ins_sve_addr_ri_u6,
aarch64_ins_sve_addr_rr_lsl, aarch64_ins_sve_addr_rz_xtw,
aarch64_ins_sve_addr_zi_u5, aarch64_ext_sve_addr_zz,
aarch64_ins_sve_addr_zz_lsl, aarch64_ins_sve_addr_zz_sxtw,
aarch64_ins_sve_addr_zz_uxtw, aarch64_ins_sve_aimm,
aarch64_ins_sve_asimm, aarch64_ins_sve_index, aarch64_ins_sve_limm_mov,
aarch64_ins_sve_quad_index, aarch64_ins_sve_reglist,
aarch64_ins_sve_scale, aarch64_ins_sve_shlimm, aarch64_ins_sve_shrimm,
aarch64_ins_sve_float_half_one, aarch64_ins_sve_float_half_two,
aarch64_ins_sve_float_zero_one, aarch64_opcode_encode): Likewise.
* aarch64-dis.h (aarch64_extract_operand, aarch64_##x): Likewise.
* aarch64-dis.c (aarch64_ext_regno, aarch64_ext_reglane,
aarch64_ext_reglist, aarch64_ext_ldst_reglist,
aarch64_ext_ldst_reglist_r, aarch64_ext_ldst_elemlist,
aarch64_ext_advsimd_imm_shift, aarch64_ext_imm, aarch64_ext_imm_half,
aarch64_ext_advsimd_imm_modified, aarch64_ext_fpimm,
aarch64_ext_imm_rotate1, aarch64_ext_imm_rotate2, aarch64_ext_fbits,
aarch64_ext_aimm, aarch64_ext_limm_1, aarch64_ext_limm, decode_limm,
aarch64_ext_inv_limm, aarch64_ext_ft, aarch64_ext_addr_simple,
aarch64_ext_addr_regoff, aarch64_ext_addr_offset, aarch64_ext_addr_simm,
aarch64_ext_addr_simm10, aarch64_ext_addr_uimm12,
aarch64_ext_simd_addr_post, aarch64_ext_cond, aarch64_ext_sysreg,
aarch64_ext_pstatefield, aarch64_ext_sysins_op, aarch64_ext_barrier,
aarch64_ext_prfop, aarch64_ext_hint, aarch64_ext_reg_extended,
aarch64_ext_reg_shifted, aarch64_ext_sve_addr_ri_s4xvl,
aarch64_ext_sve_addr_ri_s6xvl, aarch64_ext_sve_addr_ri_s9xvl,
aarch64_ext_sve_addr_ri_s4, aarch64_ext_sve_addr_ri_u6,
aarch64_ext_sve_addr_rr_lsl, aarch64_ext_sve_addr_rz_xtw,
aarch64_ext_sve_addr_zi_u5, aarch64_ext_sve_addr_zz,
aarch64_ext_sve_addr_zz_lsl, aarch64_ext_sve_addr_zz_sxtw,
aarch64_ext_sve_addr_zz_uxtw, aarch64_ext_sve_aimm,
aarch64_ext_sve_asimm, aarch64_ext_sve_index, aarch64_ext_sve_limm_mov,
aarch64_ext_sve_quad_index, aarch64_ext_sve_reglist,
aarch64_ext_sve_scale, aarch64_ext_sve_shlimm, aarch64_ext_sve_shrimm,
aarch64_ext_sve_float_half_one, aarch64_ext_sve_float_half_two,
aarch64_ext_sve_float_zero_one, aarch64_opcode_decode): Likewise.
(determine_disassembling_preference, aarch64_decode_insn,
print_insn_aarch64_word, print_insn_data): Take errors struct.
(print_insn_aarch64): Use errors.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-gen.c (print_operand_inserter): Use errors and change type to
boolean in aarch64_insert_operan.
(print_operand_extractor): Likewise.
* aarch64-opc.c (aarch64_print_operand): Use sysreg struct.
bfd * targets.c: Wrap nfp_elf64_vec in BFD64 ifdef.
include * opcode/nfp.h: Use uint64_t instead of bfd_vma.
opcodes * nfp-dis.c: Use uint64_t for instruction variables, not bfd_vma.
This patch is aimed at silencing gcc8 -Wstringop-truncation warnings.
Unfortunately adding __attribute__ ((__nonstring)) doesn't work in a
number of the places patched here, (see
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=85643) so if you have
recent glibc headers installed you'll need to configure binutils with
--disable-werror to compile using gcc8 or gcc9.
include/
* ansidecl.h: Import from gcc.
* coff/internal.h (struct internal_scnhdr): Add ATTRIBUTE_NONSTRING
to s_name.
(struct internal_syment): Add ATTRIBUTE_NONSTRING to _n_name.
bfd/
* elf-linux-core.h (struct elf_external_linux_prpsinfo32_ugid32),
(struct elf_external_linux_prpsinfo32_ugid16),
(struct elf_external_linux_prpsinfo64_ugid32),
(struct elf_external_linux_prpsinfo64_ugid16): Add ATTRIBUTE_NONSTRING
to pr_fname and pr_psargs fields. Remove GCC diagnostic pragmas.
Move comment to..
* elf.c (elfcore_write_prpsinfo): ..here. Indent nested preprocessor
directives.
* elf32-arm.c (elf32_arm_nabi_write_core_note): Add ATTRIBUTE_NONSTRING
to data.
* elf32-ppc.c (ppc_elf_write_core_note): Likewise.
* elf32-s390.c (elf_s390_write_core_note): Likewise.
* elf64-s390.c (elf_s390_write_core_note): Likewise.
* elfxx-aarch64.c (_bfd_aarch64_elf_write_core_note): Likewise.
* elf64-x86-64.c (elf_x86_64_write_core_note): Add GCC diagnostic
pragmas.
* peXXigen.c (_bfd_XXi_swap_scnhdr_out): Use strnlen to avoid
false positive gcc-8 warning.
gas/
* config/obj-evax.c (shorten_identifier): Use memcpy in place
of strncpy.
* config/obj-macho.c (obj_mach_o_make_or_get_sect): Ensure
segname and sectname fields are NUL terminated.
Define and handle TLS relocations for FDPIC in BFD and gas.
In gas, the new relocations are rejected if the --fdpic option was not
specified.
We also define the __tdata_start symbol to mark the start of the
.tdata section. This allows FDPIC static binaries to find the start of
.tdata section, since phdr->p_vaddr of TLS segment is not a valid
value for FDPIC.
2018-04-25 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
bfd/:
* bfd-in2.h (BFD_RELOC_ARM_TLS_GD32_FDPIC)
(BFD_RELOC_ARM_TLS_LDM32_FDPIC, BFD_RELOC_ARM_TLS_IE32_FDPIC): New
relocations.
* elf32-arm.c (elf32_arm_howto_table_2): Add R_ARM_TLS_GD32_FDPIC,
R_ARM_TLS_LDM32_FDPIC, R_ARM_TLS_IE32_FDPIC relocations.
(elf32_arm_reloc_map): Add R_ARM_TLS_GD32_FDPIC,
R_ARM_TLS_LDM32_FDPIC, R_ARM_TLS_IE32_FDPIC.
(struct elf32_arm_link_hash_table): Update comment.
(elf32_arm_final_link_relocate): Handle TLS FDPIC relocations.
(IS_ARM_TLS_RELOC): Likewise.
(elf32_arm_check_relocs): Likewise.
(allocate_dynrelocs_for_symbol): Likewise.
(elf32_arm_size_dynamic_sections): Update comment.
* reloc.c: Add BFD_RELOC_ARM_TLS_GD32_FDPIC,
BFD_RELOC_ARM_TLS_LDM32_FDPIC, BFD_RELOC_ARM_TLS_IE32_FDPIC.
gas/
* config/tc-arm.c (reloc_names): Add TLSGD_FDPIC, TLSLDM_FDPIC,
GOTTPOFF_FDIC relocations.
(md_apply_fix): Handle the new TLS FDPIC relocations.
(tc_gen_reloc): Likewise.
(arm_fix_adjustable): Likewise.
include/
* elf/arm.h: Add R_ARM_TLS_GD32_FDPIC, R_ARM_TLS_LDM32_FDPIC,
R_ARM_TLS_IE32_FDPIC.
ld/
* scripttempl/elf.sc: Define __tdata_start for .tdata section.
ELF files targetting ARM FDPIC use the ELFOSABI_ARM_FDPIC flag.
Set it appropriately in file generators (eg. gas), and handle it in
readers (eg. readelf).
2018-04-25 Christophe Lyon <christophe.lyon@st.com>
Mickaël Guêné <mickael.guene@st.com>
bfd/
* elf32-arm.c (elf32_arm_print_private_bfd_data): Support
EF_ARM_PIC and ELFOSABI_ARM_FDPIC.
(elf32_arm_post_process_headers): Support ELFOSABI_ARM_FDPIC.
(ELF_OSABI): Define to ELFOSABI_ARM_FDPIC.
binutils/
* readelf.c (decode_ARM_machine_flags): Support EF_ARM_PIC.
(get_osabi_name): Support ELFOSABI_ARM_FDPIC.
gas/
* config/tc-arm.c (arm_fdpic): New.
(elf32_arm_target_format): Support FDPIC.
(OPTION_FDPIC): New.
(md_longopts): Support FDPIC.
(md_parse_option): Likewise.
(md_show_usage): Likewise.
include/
* elf/arm.h (EF_ARM_FDPIC): New.
Andrew Sadek <andrew.sadek.se@gmail.com>
A new implemented feature in GCC Microblaze that allows Position
Independent Code to run using Data Text Relative addressing instead
of using Global Offset Table.
Its aim was to make 'PIC' more efficient and flexible as elf size
excess performance overhead were noticed when using GOT due to the
indirect addressing.
include/ChangeLog:
* bfdlink.h (Add flag): Add new flag @ 'bfd_link_info' struct.
* elf/microblaze.h (Add 3 new relocations):
R_MICROBLAZE_TEXTPCREL_64, R_MICROBLAZE_TEXTREL_64
and R_MICROBLAZE_TEXTREL_32_LO for relax function.
bfd/ChangeLog:
* bfd/reloc.c (2 new BFD relocations):
BFD_RELOC_MICROBLAZE_64_TEXTPCREL &
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
* bfd/bfd-in2.h: Regenerate
* bfd/libbfd.h: Regenerate
* bfd/elf32-microblaze.c (Handle new relocs): define 'HOWTO' of 3
new relocs and handle them in both relocate and relax functions.
(microblaze_elf_reloc_type_lookup): add mapping between for new
bfd relocs.
(microblaze_elf_relocate_section): Handle new relocs in case of
elf relocation.
(microblaze_elf_relax_section): Handle new relocs for elf relaxation.
gas/ChangeLog:
* gas/config/tc-microblaze.c (Handle new relocs directives in
assembler): Handle new relocs from compiler output.
(imm_types): add new imm types for data text relative addressing
TEXT_OFFSET, TEXT_PC_OFFSET
(md_convert_frag): conversion for BFD_RELOC_MICROBLAZE_64_TEXTPCREL,
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
(md_apply_fix): apply fix for BFD_RELOC_MICROBLAZE_64_TEXTPCREL,
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
(md_estimate_size_before_relax): estimate size for
BFD_RELOC_MICROBLAZE_64_TEXTPCREL,
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
(tc_gen_reloc): generate relocations for
BFD_RELOC_MICROBLAZE_64_TEXTPCREL,
BFD_RELOC_MICROBLAZE_64_TEXTPCREL
ld/ChangeLog:
* ld/lexsup.c (Add 2 ld options):
(ld_options): add disable-multiple-abs-defs @ 'ld_options' array
(parse_args): parse new option and pass flag to 'link_info' struct.
* ld/ldlex.h (Add enum): add new enum @ 'option_values' enum.
* ld/ld.texinfo (Add new option): Add description for
'disable-multiple-abs-defs'
* ld/main.c: Initialize flags with false @ 'main'. Handle
disable-multiple-abs-defs @ 'mutiple_definition'.
In addition to the existing relocs we need two more to mark all
instructions in the call sequence, PLTCALL on the call itself (plus
the toc restore insn for ppc64), and PLTSEQ on others. All
relocations in a particular sequence have the same symbol.
Example ppc64 ELFv2 assembly:
.reloc .,R_PPC64_PLTSEQ,puts
std 2,24(1)
addis 12,2,puts@plt@ha # .reloc .,R_PPC64_PLT16_HA,puts
ld 12,puts@plt@l(12) # .reloc .,R_PPC64_PLT16_LO_DS,puts
.reloc .,R_PPC64_PLTSEQ,puts
mtctr 12
.reloc .,R_PPC64_PLTCALL,puts
bctrl
ld 2,24(1)
Example ppc32 -fPIC assembly:
addis 12,30,puts+32768@plt@ha # .reloc .,R_PPC_PLT16_HA,puts+0x8000
lwz 12,12,puts+32768@plt@l # .reloc .,R_PPC_PLT16_LO,puts+0x8000
.reloc .,R_PPC_PLTSEQ,puts+32768
mtctr 12
.reloc .,R_PPC_PLTCALL,puts+32768
bctrl
Marking sequences like this allows the linker to convert them to nops
and a direct call if the target symbol turns out to be local.
When the call is __tls_get_addr, each relocation shown above is paired
with an R_PPC*_TLSLD or R_PPC*_TLSGD reloc to additionally mark the
sequence for possible TLS optimization. The TLSLD or TLSGD relocs are
emitted first.
include/
* elf/ppc.h (R_PPC_PLTSEQ, R_PPC_PLTCALL): Define.
* elf/ppc64.h (R_PPC64_PLTSEQ, R_PPC64_PLTCALL): Define.
bfd/
* elf32-ppc.c (ppc_elf_howto_raw): Add PLTSEQ and PLTCALL howtos.
(is_plt_seq_reloc): New function.
(ppc_elf_check_relocs): Handle PLTSEQ and PLTCALL relocs.
(ppc_elf_tls_optimize): Handle inline plt call sequence.
(ppc_elf_relax_section): Handle PLTCALL reloc.
(ppc_elf_relocate_section): Nop out inline plt call sequence when
resolving locally.
* elf64-ppc.c (ppc64_elf_howto_raw): Add R_PPC64_PLTSEQ and
R_PPC64_PLTCALL entries. Comment R_PPC64_TOCSAVE.
(has_tls_get_addr_call): Correct comment.
(is_branch_reloc): Add PLTCALL.
(is_plt_seq_reloc): New function.
(ppc64_elf_check_relocs): Handle PLT16_LO_DS reloc. Set
has_tls_reloc for R_PPC64_TLSGD and R_PPC64_TLSLD. Create plt
entry for R_PPC64_PLTCALL.
(ppc64_elf_tls_optimize): Handle inline plt call sequence.
(ppc_type_of_stub): Handle PLTCALL reloc.
(toc_adjusting_stub_needed): Likewise.
(ppc64_elf_relocate_section): Set "can_plt_call" for PLTCALL
reloc insn. Nop out inline plt call sequence when resolving
locally. Handle __tls_get_addr inline plt call optimization.
elfcpp/
* powerpc.h (R_POWERPC_PLTSEQ, R_POWERPC_PLTCALL): Define.
gold/
* powerpc.cc (Target_powerpc::Track_tls::maybe_skip_tls_get_addr_call):
Handle inline plt sequence relocs.
(Stub_table::Plt_stub_key::Plt_stub_key): Likewise.
(Target_powerpc::Scan::reloc_needs_plt_for_ifunc): Likewise.
(Target_powerpc::Relocate::relocate): Likewise.
This patch adds the following relocation support into binutils gas.
BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST16_TPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST32_TPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST64_TPREL_LO12_NC,
BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12,
BFD_RELOC_AARCH64_TLSLE_LDST8_TPREL_LO12_NC.
Those relocations includes both ip64 and ilp32 variant.
The following bits in DT_FLAGS_1 are used by Solaris:
#define DF_1_KMOD 0x10000000 /* kernel module */
#define DF_1_WEAKFILTER 0x20000000 /* apply weak binding to DT_FILTER */
#define DF_1_NOCOMMON 0x40000000 /* no COMMON symbols exist */
binutils/
* readelf.c (process_dynamic_section): Also dump DF_1_KMOD,
DF_1_WEAKFILTER and DF_1_NOCOMMON.
include/
* elf/common.h (DF_1_KMOD): New.
(DF_1_WEAKFILTER): Likewise.
(DF_1_NOCOMMON): Likewise.
PR 22113
incldue * coff/pe.h (struct pex64_unwind_info): Add a rawUnwindCodesEnd
field.
bfd * pei-x86_64.c (pex64_get_unwind_info): Change to a boolean
function. Add an end address parameter. Check access of the data
pointer to make sure that they do not extend beyond the end
address. Return FALSE if any check fails. Add the end address
pointer to the ui structure.
(pex64_xdata_print_uwd_codes): Check accesses of the raw unwind
codes to make sure that they do not extend beyond the end address
pointer. Print an error message and return immediately if any
check fails.
Among the macros to manipulate an arm_feature_set structure is the
ARM_FEATURE_COPY which copy the value of a feature set into another.
This can be achieved with a simple assignement which most of the
existing code does. This patch removes the last 2 uses of that macro and
remove the macro altogether.
2018-02-27 Thomas Preud'homme <thomas.preudhomme@arm.com>
include/
* opcode/arm.h (ARM_FEATURE_COPY): Remove macro definition.
2018-02-27 Thomas Preud'homme <thomas.preudhomme@arm.com>
opcodes/
* arm-dis.c (print_insn_coprocessor): Replace uses of ARM_FEATURE_COPY
macro by assignements.
The `M' and `m' MIPS16 operand codes are functionally the same, denoting
a 7-bit register list that is encoded the same way for both SAVE and
RESTORE. Use `m' for both instructions then, making `M' available for a
different use.
opcodes/
* mips16-opc.c (decode_mips16_operand) <'M'>: Remove case.
(mips16_opcodes): Replace `M' with `m' for "restore".
include/
* opcode/mips.h: Remove `M' operand code.
See email thread starting here: https://www.sourceware.org/ml/binutils/2018-01/msg00001.html
include * coff/msdos.h: New header.
* coff/pe.h: Move common defines to msdos.h.
* coff/powerpc.h: Likewise.
bfd * i386msdos.c (msdos_mkobject); New function.
(msdos_object_p): New function.
(i386_msdos_vec): Use msdos_object_p as the check_format
function.
* peicode.h: Rename external_PEI_DOS_hdr, DOSMAGIC, and
NT_SIGNATURE to external_DOS_hdr, IMAGE_DOS_SIGNATURE, and
IMAGE_NT_SIGNATURE.
* peXXigen.c: Likewise.
* coff-ia64.c: Likewise.
The new "-z separate-code" option will generate separate code LOAD
segment which must be in wholly disjoint pages from any other data.
include/
PR ld/22393
* bfdlink.h (bfd_link_info): Add separate_code.
ld/
PR ld/22393
* NEWS: Mention "-z separate-code".
* emultempl/elf32.em (gld${EMULATION_NAME}_get_script): Get
builtin linker scripts and return linker scripts from disk for
"-z separate-code".
(gld${EMULATION_NAME}_handle_option): Handle "-z separate-code"
and "-z noseparate-code".
* genscripts.sh: Generate linker scripts for "-z separate-code".
(LD_FLAG): Set to *textonly for "-z separate-code".
* ld.texinfo: Document "-z separate-code".
* lexsup.c (elf_shlib_list_options): Add linker help messsages
for "-z separate-code" and "-z noseparate-code".
* scripttempl/elf.sc (SEPARATE_TEXT): New
(TEXT_SEGMENT_ALIGN): Likewise.
Use ${TEXT_SEGMENT_ALIGN} to align and pad text segment to
${MAXPAGESIZE}.
gas/
* testsuite/gas/riscv/priv-reg.s: Add missing stval and mtval.
* testsuite/gas/riscv/priv-reg.d: Likewise.
include/
* opcode/riscv-opc.h (CSR_SBADADDR): Rename to CSR_STVAL. Rename
DECLARE_CSR entry. Add alias to map sbadaddr to CSR_STVAL.
(CSR_MBADADDR): Rename to CSR_MTVAL. Rename DECLARE_CSR entry.
Add alias to map mbadaddr to CSR_MTVAL.
Dot products deviate from the normal disassembly rules for lane indexed
instruction. Their canonical representation is in the form of:
v0.2s, v0.8b, v0.4b[0] instead of v0.2s, v0.8b, v0.b[0] to try to denote
that these instructions select 4x 1 byte elements instead of a single 1 byte
element.
Previously we were disassembling them following the normal rules, this patch
corrects the disassembly.
gas/
PR gas/22559
* config/tc-aarch64.c (vectype_to_qualifier): Support AARCH64_OPND_QLF_S_4B.
* gas/testsuite/gas/aarch64/dotproduct.d: Update disassembly.
include/
PR gas/22559
* aarch64.h (aarch64_opnd_qualifier): Add AARCH64_OPND_QLF_S_4B.
opcodes/
PR gas/22559
* aarch64-asm.c (aarch64_ins_reglane): Change AARCH64_OPND_QLF_S_B to
AARCH64_OPND_QLF_S_4B
* aarch64-dis.c (aarch64_ext_reglane): Change AARCH64_OPND_QLF_S_B to
AARCH64_OPND_QLF_S_4B
* aarch64-opc.c (aarch64_opnd_qualifiers): Add 4b variant.
* aarch64-tbl.h (QL_V2DOT): Change S_B to S_4B.
Previously parse_vector_type_for_operand was changed to allow the use of 4b
register size for indexed lane instructions. However this had the unintended
side effect of also allowing 4b for normal vector registers.
Because this support was only partial the rest of the tool silently treated
4b as 8b and continued. This patch adds full support for 4b so it can be
properly distinguished from 8b and the correct errors are generated.
With this patch you still can't encode any instruction which actually requires
v<num>.4b but such instructions don't exist so to prevent needing a workaround
in get_vreg_qualifier_from_value this was just omitted.
gas/
PR gas/22529
* config/tc-aarch64.c (vectype_to_qualifier): Support AARCH64_OPND_QLF_V_4B.
* gas/testsuite/gas/aarch64/pr22529.s: New.
* gas/testsuite/gas/aarch64/pr22529.d: New.
* gas/testsuite/gas/aarch64/pr22529.l: New.
include/
PR gas/22529
* opcode/aarch64.h (aarch64_opnd_qualifier): Add AARCH64_OPND_QLF_V_4B.
opcodes/
PR gas/22529
* aarch64-opc.c (aarch64_opnd_qualifiers): Add 4b variant.
Gold plugins may wish to further process an input file added by a plugin. For
example, the plugin may need to assign a unique segment for sections in a
plugin-generated input file. This patch adds a plugin callback that the linker
will call when reading symbols from a new input file added after the
all_symbols_read event (i.e. an input file added by a plugin).
2017-12-11 Stephen Crane <sjc@immunant.com>
* plugin-api.h: Add new plugin hook to allow processing of input
files added by a plugin.
(ld_plugin_new_input_handler): New function hook type.
(ld_plugin_register_new_input): New interface.
(LDPT_REGISTER_NEW_INPUT_HOOK): New enum val.
(tv_register_new_input): New member.
* plugin.cc (Plugin::load): Include hooks for register_new_input
in transfer vector.
(Plugin::new_input): New function.
(register_new_input): New function.
(Plugin_manager::claim_file): Call Plugin::new_input if in
replacement phase.
* plugin.h (Plugin::set_new_input_handler): New function.
* testsuite/plugin_new_section_layout.c: New plugin to test
new_input plugin API.
* testsuite/plugin_final_layout.sh: Add new input test.
* testsuite/Makefile.am (plugin_layout_new_file): New test case.
* testsuite/Makefile.in: Regenerate.
CORE PT_NOTE segments may have p_align values of 0 or 1. gABI specifies
that PT_NOTE alignment should be aligned to 4 bytes for 32-bit objects
and to 8 bytes for 64-bit objects. If segment alignment is less than 4,
we use 4 byte alignment.
This reverts commit 650444eb54.
With this patch, running the GDB test case gdb.base/auxv.exp is stuck in
an infinite loop, consuming memory to the point that it renders the
machine unusable. I am reverting it so we can take our time to
investigate while not killing all the developers' machines.
According to gABI, in a note entry, the note name field, not note name
size, is padded for the note descriptor. And the note descriptor field,
not note descriptor size, is padded for the next note entry. Also notes
are aligned to 4 bytes in 32-bit objects and 8 bytes in 64-bit objects.
Since on Linux, .note.ABI-tag and .note.gnu.build-id notes are always
aligned to 4 bytes, we need to use alignment of note section or note
segment, instead of assuming alignment based on ELF file class.
Tested on i686 and x86-64.
bfd/
PR binutils/22444
* elf.c (elf_read_notes): Add an argument for note aligment.
(elf_parse_notes): Likewise.
(_bfd_elf_make_section_from_shdr): Pass section aligment to
elf_parse_notes.
(bfd_section_from_phdr): Pass segment aligment to elf_read_notes.
(elf_parse_notes): Add an argument for note aligment. Use
ELF_NOTE_DESC_OFFSET to get the offset of the note descriptor.
Use ELF_NOTE_NEXT_OFFSET to get the offset of the next note
entry.
(elf_read_notes): Add an argument for note aligment and pass it
to elf_parse_notes.
binutils/
PR binutils/22444
* readelf.c (process_notes_at): Use ELF_NOTE_DESC_OFFSET to get
the offset of the note descriptor. Use ELF_NOTE_NEXT_OFFSET to
get the offset of the next note entry.
include/
PR binutils/22444
* elf/external.h (ELF_ALIGN_UP): New.
(ELF_NOTE_DESC_OFFSET): Likewise.
(ELF_NOTE_NEXT_OFFSET): Likewise.
This patch separates the new FP16 instructions backported from Armv8.4-a to Armv8.2-a
into a new flag order to distinguish them from the rest of the already existing optional
FP16 instructions in Armv8.2-a.
The new flag "+fp16fml" is available from Armv8.2-a and implies +fp16 and is mandatory on
Armv8.4-a.
gas/
* config/tc-aarch64.c (fp16fml): New.
* doc/c-aarch64.texi (fp16fml): New.
* testsuite/gas/aarch64/armv8_2-a-crypto-fp16.d (fp16): Make fp16fml.
* testsuite/gas/aarch64/armv8_3-a-crypto-fp16.d (fp16): Make fp16fml.
include/
* opcode/aarch64.h: (AARCH64_FEATURE_F16_FML): New.
(AARCH64_ARCH_V8_4): Enable AARCH64_FEATURE_F16_FML by default.
opcodes/
* aarch64-tbl.h (aarch64_feature_fp_16_v8_2): Require AARCH64_FEATURE_F16_FML
and AARCH64_FEATURE_F16.
The new flag "+fp16fml" is available from Armv8.2-a and implies +fp16 and is mandatory
from Armv8.4-a.
gas/
* config/tc-arm.c (arm_ext_fp16_fml, fp16fml): New.
(do_neon_fmac_maybe_scalar_long): Use arm_ext_fp16_fml.
* doc/c-arm.texi (fp16, fp16fml): New.
* testsuite/gas/arm/armv8_2-a-fp16.d (fp16): Make fp16fml.
* testsuite/gas/arm/armv8_3-a-fp16.d (fp16): Make fp16fml.
* testsuite/gas/arm/armv8_2-a-fp16-illegal.d (fp16): Make fp16fml.
* testsuite/gas/arm/armv8_2-a-fp16-thumb2.d (fp16): Make fp16fml.
include/
* opcode/arm.h: (ARM_EXT2_FP16_FML): New.
(ARM_AEXT2_V8_4A): Add ARM_EXT2_FP16_FML.
Linking EFI executables from ELF object files can result in corrupted
COFF section flags if the section's alignment is too high. Issue a
diagnostic in that case, erroring out if this is not a final link, and
make sure only in-range values get written to the output image.
While doing this also make tic80 use the generic alignment macros
instead of custom #ifdef-ary.
No testsuite regressions for the range of COFF/PE targets that actually
cross-build in the first place on x86-64-linux.
The new options are:
+aes: Enables the AES instructions of Armv8-a,
enabled by default with +crypto.
+sha2: Enables the SHA1 and SHA2 instructions of Armv8-a,
enabled by default with +crypto.
These options have been turned on by default when +crypto
is used, as such no breakage is expected.
The reason for the split is because with the introduction of Armv8.4-a
the implementation of AES has explicitly been made independent of the
implementation of the other crypto extensions. Backporting the split does
not break any of the previous requirements and so is safe to do.
gas * config/tc-aarch64.c
(aarch64_features): Include AES and SHA2 in CRYPTO.
Add SHA2 and AES.
include * opcode/aarch64.h:
(AARCH64_FEATURE_SHA2, AARCH64_FEATURE_AES): New.
opcodes * aarch64-tbl.h (aarch64_feature_crypto): Add AES and SHA2.
(aarch64_feature_sha2, aarch64_feature_aes): New.
(SHA2, AES): New.
(AES_INSN, SHA2_INSN): New.
(pmull, pmull2, aese, aesd, aesmc, aesimc): Change to AES_INS.
(sha1h, sha1su1, sha256su0, sha1c, sha1p,
sha1m, sha1su0, sha256h, sha256h2, sha256su1):
Change to SHA2_INS.
gas * config/tc-arm.c (arm_extensions):
(arm_archs): New entry for "armv8.4-a".
Add FPU_ARCH_DOTPROD_NEON_VFP_ARMV8.
(arm_ext_v8_2): New variable.
(enum arm_reg_type): New enumeration REG_TYPE_NSD.
(reg_expected_msgs): New entry for REG_TYPE_NSD.
(parse_typed_reg_or_scalar): Handle REG_TYPE_NSD.
(parse_scalar): Support REG_TYPE_VFS.
(enum operand_parse_code): New enumerations OP_RNSD and OP_RNSD_RNSC.
(parse_operands): Handle OP_RNSD and OP_RNSD_RNSC.
(NEON_SHAPE_DEF): New entries for DHH and DHS.
(neon_scalar_for_fmac_fp16_long): New function to generate Rm encoding
for new FP16 instructions in ARMv8.2-A.
(do_neon_fmac_maybe_scalar_long): New function to encode new FP16
instructions in ARMv8.2-A.
(do_neon_vfmal): Wrapper function for vfmal.
(do_neon_vfmsl): Wrapper function for vfmsl.
(insns): New entries for vfmal and vfmsl.
* doc/c-arm.texi (-march): Document "armv8.4-a".
* testsuite/gas/arm/dotprod-mandatory.d: New test.
* testsuite/gas/arm/armv8_2-a-fp16.s: New test source.
* testsuite/gas/arm/armv8_2-a-fp16-illegal.s: New test source.
* testsuite/gas/arm/armv8_2-a-fp16.d: New test.
* testsuite/gas/arm/armv8_3-a-fp16.d: New test.
* testsuite/gas/arm/armv8_4-a-fp16.d: New test.
* testsuite/gas/arm/armv8_2-a-fp16-thumb2.d: New test.
* testsuite/gas/arm/armv8_2-a-fp16-illegal.d: New test.
* testsuite/gas/arm/armv8_2-a-fp16-illegal.l: New error file.
opcodes * arm-dis.c (coprocessor_opcodes): New entries for ARMv8.2-A new
FP16 instructions, including vfmal.f16 and vfmsl.f16.
include * opcode/arm.h (ARM_AEXT2_V8_4A): Include Dot Product feature.
(ARM_EXT2_V8_4A): New macro.
(ARM_AEXT2_V8_4A): Likewise.
(ARM_ARCH_V8_4A): Likewise.
The RISC-V privileged ISA changed the name of sptbr (Supervisor Page
Table Base Register) to satp (Supervisor Address Translation and
Protection) to reflect the fact it could be used for more than just
paging. This patch adds an alias, as they're the same register.
include/ChangeLog
2017-11-06 Palmer Dabbelt <palmer@dabbelt.com>
* opcode/riscv-opc.h (sptbr): Rename to satp.
(CSR_SPTBR): Rename to CSR_SATP.
(sptbr): Alias to CSR_SATP.
gas/ChangeLog
2017-11-06 Palmer Dabbelt <palmer@dabbelt.com>
* testsuite/gas/riscv/satp.d: New test.
testsuite/gas/riscv/satp.s: Likewise.
testsuite/gas/riscv/riscv.exp: Likewise.
config/tc-riscv.c (md_begin): Handle CSR aliases.
gas * config/tc-arm.c (arm_cpus):
Change FPU_ARCH_CRYPTO_NEON_VFP_ARMV8
into FPU_ARCH_CRYPTO_NEON_VFP_ARMV8_DOTPROD.
include * opcode/arm.h (FPU_ARCH_CRYPTO_NEON_VFP_ARMV8_DOTPROD):
New macro.
The FP16 feature is optional in ARMv8.2, so it is wrong to add it to
the default AARCH64_ARCH_V8_2 feature flags. This patch makes the
behaviour consistent with that of gcc, which also does not assume FP16
for ARMv8.2.
include/
* opcode/aarch64.h (AARCH64_ARCH_V8_2): Drop
AARCH64_FEATURE_F16.
This matches the ISA specification. This also adds two tests: one to
make sure the assembler rejects invalid 'c.lui's, and one to make sure
we only relax valid 'c.lui's.
bfd/ChangeLog
2017-10-24 Andrew Waterman <andrew@sifive.com>
* elfnn-riscv.c (_bfd_riscv_relax_lui): Don't relax to c.lui
when rd is x0.
include/ChangeLog
2017-10-24 Andrew Waterman <andrew@sifive.com>
* opcode/riscv.h (VALID_RVC_LUI_IMM): c.lui can't load the
immediate 0.
gas/ChangeLog
2017-10-24 Andrew Waterman <andrew@sifive.com>
* testsuite/gas/riscv/c-lui-fail.d: New testcase.
gas/testsuite/gas/riscv/c-lui-fail.l: Likewise.
gas/testsuite/gas/riscv/c-lui-fail.s: Likewise.
gas/testsuite/gas/riscv/riscv.exp: Likewise.
ld/ChangeLog
2017-10-24 Andrew Waterman <andrew@sifive.com>
* ld/testsuite/ld-riscv-elf/c-lui.d: New testcase.
ld/testsuite/ld-riscv-elf/c-lui.s: Likewise.
ld/testsuite/ld-riscv-elf/ld-riscv-elf.exp: New test suite.
FT32B is a new FT32 family member. It has a code
compression scheme, which requires the use of linker
relaxations. The change is quite large, so submission
is in several parts.
Part 1 adds a 15-bit instruction field, and CPU-specific functions for
the code compression that are used in binutils and GDB.
bfd/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf32-ft32.c: Add HOWTO R_FT32_15.
* reloc.c: Add BFD_RELOC_FT32_15.
gas/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* config/tc-ft32.c (md_assemble): Replace FT32_FLD_K8 with
K15.
(md_apply_fix, tc_gen_reloc): Add BFD_RELOC_FT32_15.
include/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* elf/ft32.h: Add R_FT32_15.
* opcode/ft32.h: Replace FT32_FLD_K8 with K15.
(ft32_shortcode, sc_compar, ft32_split_shortcode,
ft32_merge_shortcode, ft32_merge_shortcode): New functions.
opcodes/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* opcodes/ft32-dis.c (print_insn_ft32): Replace FT32_FLD_K8 with K15.
* opcodes/ft32-opc.c (ft32_opc_info): Replace FT32_FLD_K8 with
K15. Add jmpix pattern.
sim/ChangeLog:
2017-10-12 James Bowman <james.bowman@ftdichip.com>
* sim/ft32/interp.c (step_once): Replace FT32_FLD_K8 with K15.
FreeBSD recently added two additional ELF auxiliary vectors. FreeBSD's
AT_HWCAP uses a different number compared to AT_HWCAP on Linux as the
numerical value was already in use for a different vector on FreeBSD.
include/ChangeLog:
* elf/common.h (AT_FREEBSD_EHDRFLAGS, AT_FREEBSD_HWCAP): Define.
gdb/ChangeLog:
* fbsd-tdep.c (fbsd_print_auxv_entry): Handle AT_EHDRFLAGS and
AT_HWCAP.
When dumping location lists, also dump locview lists that may be
interspersed with them, and bring view pairs next to the corresponding
location list entries.
This patch supports DW_AT_GNU_locviews as a separate attribute for
DWARF4- loc_lists and split (dwo) loclists, as well as DWARF5
loclists.
It also supports, in DWARF5 loclists, the proposed
DW_LLE_GNU_view_pair loclist entry type proposed for DWARF6.
The tests use 32-bit DWARF, even on 64-bit targets, resolving offsets
to constants so as to reduce the risk that relocations be created for
them, or that the offsets be rejected as nonconstants.
The patch also adds an xfail to an unrelated test, namely dw5, so that
no unexpected fails remain on nds32*-elf, one of the tested targets.
Reviewed-by: Alan Modra <amodra@gmail.com>
for include/ChangeLog
* dwarf2.def (DW_AT_GNU_locviews): New.
* dwarf2.h (enum dwarf_location_list_entry_type): Add
DW_LLE_GNU_view_pair.
(DW_LLE_view_pair): Define.
for binutils/ChangeLog
* dwarf.h (debug_info): Add loc_views and num_loc_views.
* dwarf.c (vm1): New constant.
(print_dwarf_view): New function.
(read_and_display_attr_value): Support DW_AT_GNU_locviews.
(process_debug_info): Keep num_loc_offsets and num_loc_views
in sync.
(display_view_pair_list): New function.
(display_loc_list_dwo): Take vstart_ptr; update it. Dump
location view pairs before the range they apply to, when a
viewlist augments the loc list.
(display_loc_list): Likewise. Check view numbers in range
tests.
(display_loclists_list): Likewise. Handle view pair entries,
and warn on trailing ones.
(loc_views): New variable.
(loc_offsets_compar): Compare loc_views if loc_offsets are the
same.
(display_debug_loc): Check and sort loc_views too. Accept
loc_view as expected_start. Skip if lists and views are the
same. Dump locview list separately in order, and pass the
locview list base to each list dump function. Warn and skip
overlap and hole checking if we find loclists and locviews to
not be adjacent.
* testsuite/binutils-all/locview-1.s: New.
* testsuite/binutils-all/readelf.locview-1: New.
* testsuite/binutils-all/locview-2.s: New.
* testsuite/binutils-all/readelf.locview-2: New.
* testsuite/binutils-all/readelf.exp: Run new tests. Fix
option spelling in pr18374 fail message. XFAIL dw5 test on
nds32*-elf.
As discussed in
How to use compile & execute function in GDB
https://sourceware.org/ml/gdb/2015-04/msg00026.html
GDB currently searches for compilers on /usr/bin/ARCH-OS-gcc and
chooses a match from there. However, it is not currently possible for
the user to override which compiler to use. This is what this patch
implements.
It is also a sync between GCC's and GDB's interfaces.
gdb/ChangeLog
2017-08-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* NEWS (Changes since GDB 7.9): Add set compile-gcc and show
compile-gcc.
* compile/compile.c (compile_gcc, show_compile_gcc): New.
(compile_to_object): Implement compile_gcc.
(_initialize_compile): Install "set compile-gcc". Initialize
compile_gcc.
gdb/doc/ChangeLog
2017-08-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.texinfo (Compiling and Injecting Code): Add to subsection
"Compiler search for the compile command" descriptions of set
compile-gcc and show compile-gcc.
include/ChangeLog
2017-08-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* gcc-interface.h (enum gcc_base_api_version): Update comment for
GCC_FE_VERSION_1.
(struct gcc_base_vtable): Rename set_arguments to set_arguments_v0.
Add set_arguments, set_triplet_regexp and set_driver_filename.
As discussed in
How to use compile & execute function in GDB
https://sourceware.org/ml/gdb/2015-04/msg00026.html
GDB currently searches for compilers on /usr/bin/ARCH-OS-gcc and
chooses a match from there. However, it is not currently possible for
the user to display which compiler was selected. Up until now, GDB's
compiler interface was not up-to-date with GCC's one, which means that
it wasn't possible to obtain this information. This patch implements
the mechanisms necessary for that.
gdb/ChangeLog
2017-08-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* compile/compile.c (compile_to_object): Conditionally call
set_verbose. Conditionally call compile or compile_v0.
include/ChangeLog
2017-08-23 Jan Kratochvil <jan.kratochvil@redhat.com>
* gcc-interface.h (enum gcc_base_api_version): Add
GCC_FE_VERSION_1.
(struct gcc_base_vtable): Rename compile to compile_v0. Update
comment for compile. New methods set_verbose and compile.
Add new note types available since Linux 4.8 to elf/common.h and
make the 'readelf' tool aware of it.
include/
* elf/common.h (NT_PPC_TAR): New macro.
(NT_PPC_PPR): Likewise.
(NT_PPC_DSCR): Likewise.
(NT_PPC_EBB): Likewise.
(NT_PPC_PMU): Likewise.
(NT_PPC_TM_CGPR): Likewise.
(NT_PPC_TM_CFPR): Likewise.
(NT_PPC_TM_CVMX): Likewise.
(NT_PPC_TM_CVSX): Likewise.
(NT_PPC_TM_SPR): Likewise.
(NT_PPC_TM_CTAR): Likewise.
(NT_PPC_TM_CPPR): Likewise.
(NT_PPC_TM_CDSCR): Likewise.
binutils/
* readelf.c (get_note_type): Handle PPC note types available
since Linux 4.8.
When --no-define-common is used to build shared library, treat common
symbol as undefined so that common symbols that are referenced from a
shared library to be assigned addresses only in the main program. This
eliminates the unused duplicate space in the shared library, and also
prevents any possible confusion over resolving to the wrong duplicate
when there are many dynamic modules with specialized search paths for
runtime symbol resolution.
--no-define-common is only allowed when building a shared library.
bfd/
PR ld/21903:
* elflink.c (elf_link_add_object_symbols): Treat common symbol
as undefined for --no-define-common.
include/
PR ld/21903:
* bfdlink.h (bfd_link_info): Add inhibit_common_definition.
ld/
PR ld/21903:
* ld.h (command_line): Remove inhibit_common_definition.
* ldgram.y: Replace command_line.inhibit_common_definition with
link_info.inhibit_common_definition.
* ldlang.c (lang_common): Likewise.
* lexsup.c (parse_args): Likewise.
* ldmain.c (main): Only allow --no-define-common with -shared.
* testsuite/ld-elf/pr21903.s: New file.
* testsuite/ld-elf/pr21903a.d: Likewise.
* testsuite/ld-elf/pr21903b.d: Likewise.
* testsuite/ld-elf/pr21903c.d: Likewise.
* testsuite/ld-elf/pr21903d.d: Likewise.
* testsuite/ld-elf/pr21903e.d: Likewise.
The following relocation types were added to GCC/binutils:
ARC_JLI_SECTOFF is a relocation type in Metaware that is now used by
GCC as well to adjust the index of function calls to functions with
attribute jli_call_always.
bfd/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elf32-arc.c (JLI): Define.
* reloc.c: Add JLI relocations.
gas/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/jli-1.d: New file.
* testsuite/gas/arc/jli-1.s: Likewise.
* testsuite/gas/arc/taux.d: Update for jli_base.
include/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* elf/arc-reloc.def: Add JLI relocs howto.
* opcode/arc-func.h (replace_jli): New function.
ld/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* emulparams/arcelf.sh (JLI_START_TABLE): Define.
* scripttempl/elfarc.sc: Handle jlitab section.
* scripttempl/elfarcv2.sc: Likewise.
* testsuite/ld-arc/arc.exp: Add JLI test.
* testsuite/ld-arc/jli-script.ld: New file.
* testsuite/ld-arc/jli-simple.dd: Likewise.
* testsuite/ld-arc/jli-simple.rd: Likewise.
* testsuite/ld-arc/jli-simple.s: Likewise.
* testsuite/ld/testsuite/ld-arc/jli-overflow.s: Likewise.
* testsuite/ld/testsuite/ld-arc/jli-overflow.d: Likewise.
* testsuite/ld/testsuite/ld-arc/jli-overflow.err: Likewise.
opcode/
2017-07-19 Claudiu Zissulescu <claziss@synopsys.com>
John Eric Martin <John.Martin@emmicro-us.com>
* arc-opc.c (UIMM10_6_S_JLIOFF): Define.
(UIMM3_23): Adjust accordingly.
* arc-regs.h: Add/correct jli_base register.
* arc-tbl.h (jli_s): Likewise.
When elf section size is beyond unsigned int max value, objdump fails
to disassemble from that section. Ex on PowerPC,
$ objdump -h /proc/kcore
Idx Name Size VMA
4 load2 100000000 c000000000000000
Here, size of load2 section is 0x100000000. Also note that, 0xc00....
address range is kernel space for PowerPC. Now let's try to disassemble
do_sys_open() using /proc/kcore.
$ cat /proc/kallsyms | grep -A1 -w do_sys_open
c00000000036c000 T do_sys_open
c00000000036c2d0 T SyS_open
Before patch:
$ objdump -d --start-address=0xc00000000036c000 --stop-address=0xc00000000036c2d0 /proc/kcore
/proc/kcore: file format elf64-powerpcle
Disassembly of section load2:
c00000000036c000 <load2+0x36c000>:
c00000000036c000: Address 0xc00000000036c000 is out of bounds.
Fix this by changing type of 'buffer_length' from unsigned int to
size_t. After patch:
$ objdump -d --start-address=0xc00000000036c000 --stop-address=0xc00000000036c2d0 /proc/kcore
/proc/kcore: file format elf64-powerpcle
Disassembly of section load2:
c00000000036c000 <load2+0x36c000>:
c00000000036c000: fc 00 4c 3c addis r2,r12,252
c00000000036c004: 00 53 42 38 addi r2,r2,21248
c00000000036c008: a6 02 08 7c mflr r0
include/
* dis-asm.h (struct disassemble_info): Change type of buffer_length
field to size_t.
opcodes/
* dis-buf.c (buffer_read_memory): Change type of end_addr_offset,
max_addr_offset and octets variables to size_t.
This core dump note contains the same information returned by the
ptrace PT_LWPINFO operation for each LWP belonging to a process.
binutils/ChangeLog:
* readelf.c (get_freebsd_elfcore_note_type): Handle
NT_FREEBSD_PTLWPINFO.
include/ChangeLog:
* elf/common.h (NT_FREEBSD_PTLWPINFO): Define.
PR gas/21683
include * opcode/avr.h (AVR_INSN): Add one for __gcc_isr.
gas * doc/c-avr.texi (AVR Options) <-mgcc-isr>: Document it.
(AVR Pseudo Instructions): New node.
* config/tc-avr.h (md_pre_output_hook): Define to avr_pre_output_hook.
(md_undefined_symbol): Define to avr_undefined_symbol.
(avr_pre_output_hook, avr_undefined_symbol): New protos.
* config/tc-avr.c (struc-symbol.h): Include it.
(ISR_CHUNK_Done, ISR_CHUNK_Prologue, ISR_CHUNK_Epilogue): New enums.
(avr_isr, avr_gccisr_opcode)
(avr_no_sreg_hash, avr_no_sreg): New static variables.
(avr_opt_s) <have_gccisr>: Add field.
(avr_opt): Add initializer for have_gccisr.
(enum options) <OPTION_HAVE_GCCISR>: Add enum.
(md_longopts) <"mgcc-isr">: Add entry.
(md_show_usage): Document -mgcc-isr.
(md_parse_option) [OPTION_HAVE_GCCISR]: Handle it.
(md_undefined_symbol): Remove.
(avr_undefined_symbol, avr_pre_output_hook): New fuctions.
(md_begin) <avr_no_sreg_hash, avr_gccisr_opcode>: Initialize them.
(avr_operand) <pregno>: Add argument and set *pregno if function
is called for a register constraint.
[N]: Handle constraint.
(avr_operands) <avr_operand>: Pass 5th parameter to calls.
[avr_opt.have_gccisr]: Call avr_update_gccisr. Call
avr_gccisr_operands instead of avr_operands.
(avr_update_gccisr, avr_emit_insn, avr_patch_gccisr_frag)
(avr_gccisr_operands, avr_check_gccisr_done): New static functions.
* testsuite/gas/avr/gccisr-01.d: New test.
* testsuite/gas/avr/gccisr-01.s: New test.
* testsuite/gas/avr/gccisr-02.d: New test.
* testsuite/gas/avr/gccisr-02.s: New test.
* testsuite/gas/avr/gccisr-03.d: New test.
* testsuite/gas/avr/gccisr-03.s: New test.
Correct a commit 7d64c587c1 ("Add support for the MIPS eXtended
Physical Address (XPA) ASE.") bug, causing XPA base and Virtualization
ASE instructions to be wrongly always enabled with the selection of the
MIPS32r2 or higher ISA.
For example this source assembles successfully as shown below:
$ cat xpa.s
mfhc0 $2, $1
$ as -32 -mips32 -o xpa.o xpa.s
xpa.s: Assembler messages:
xpa.s:1: Error: opcode not supported on this processor: mips32 (mips32) `mfhc0 $2,$1'
$ as -32 -mips32r2 -o xpa.o xpa.s
$ objdump -d xpa.o
xpa.o: file format elf32-tradbigmips
Disassembly of section .text:
00000000 <.text>:
0: 40420800 mfhc0 v0,c0_random
...
$
To address this issue remove the I33 (INSN_ISA32R2) marking from all XPA
instructions in the opcode table. Additionally, for XPA Virtualization
ASE instructions implement an XPAVZ (ASE_XPA_VIRT) combination ASE flag
and use it in place of IVIRT|XPA (ASE_VIRT|ASE_XPA).
Now the same source is correctly rejected unless the `-mxpa' option is
also used:
$ as -32 -mips32r2 -o xpa.o xpa.s
xpa.s: Assembler messages:
xpa.s:1: Error: opcode not supported on this processor: mips32r2 (mips32r2) `mfhc0 $2,$1'
$ as -32 -mips32r2 -mxpa -o xpa.o xpa.s
$
Add test cases for XPA base and XPA Virtualization ASE instructions.
Parts of this change by Andrew Bennett.
include/
* opcode/mips.h (ASE_XPA_VIRT): New macro.
opcodes/
* mips-dis.c (mips_calculate_combination_ases): Handle the
ASE_XPA_VIRT flag.
(parse_mips_ase_option): New function.
(parse_mips_dis_option): Factor out ASE option handling to the
new function. Call `mips_calculate_combination_ases'.
* mips-opc.c (XPAVZ): New macro.
(mips_builtin_opcodes): Correct ISA and ASE flags for "mfhc0",
"mfhgc0", "mthc0" and "mthgc0".
gas/
* config/tc-mips.c (mips_set_ase): Handle the ASE_XPA_VIRT flag.
* testsuite/gas/mips/xpa.d: Remove `xpa' from `-M' in `objdump'
flags. Add `-mvirt' to `as' flags.
* testsuite/gas/mips/xpa-err.d: New test.
* testsuite/gas/mips/xpa-virt-err.d: New test.
* testsuite/gas/mips/xpa-err.l: New stderr output.
* testsuite/gas/mips/xpa-virt-err.l: New stderr output.
* testsuite/gas/mips/xpa-err.s: New test source.
* testsuite/gas/mips/xpa-virt-err.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
binutils/
* testsuite/binutils-all/mips/mips-xpa-virt-1.d: New test.
* testsuite/binutils-all/mips/mips-xpa-virt-2.d: New test.
* testsuite/binutils-all/mips/mips-xpa-virt-3.d: New test.
* testsuite/binutils-all/mips/mips-xpa-virt-4.d: New test.
* testsuite/binutils-all/mips/mips-xpa-virt.s: New test source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
Newer Linux kernel versions offer two new register sets in support of the
z/Architecture's guarded storage facility: NT_S390_GS_CB, the
"guarded-storage registers", and NT_S390_GS_BC, the "guarded-storage
broadcast control block". This patch adds support for the respective core
notes sections to binutils.
bfd/ChangeLog:
* elf-bfd.h (elfcore_write_s390_gs_cb): Add prototype.
(elfcore_write_s390_gs_bc): Likewise.
* elf.c (elfcore_grok_s390_gs_cb): New function.
(elfcore_grok_s390_gs_bc): New function.
(elfcore_grok_note): Call them.
(elfcore_write_s390_gs_cb): New function.
(elfcore_write_s390_gs_bc): New function.
(elfcore_write_register_note): Call them.
binutils/ChangeLog:
* readelf.c (get_note_type): Add NT_S390_GS_CB and NT_S390_GS_BC.
include/ChangeLog:
* elf/common.h (NT_S390_GS_CB): New macro.
(NT_S390_GS_BC): Likewise.
This patch add assembler and disassembler support for new Dot Product
Extension.
The support can be enabled through the new "+dotprod" extension.
include/
* opcode/arm.h (FPU_NEON_EXT_DOTPROD): New macro.
(FPU_ARCH_DOTPROD_NEON_VFP_ARMV8): New macro.
gas/
* config/tc-arm.c (fpu_neon_ext_dotprod): New variable.
(neon_scalar_for_mul): Improve comments.
(do_neon_dotproduct): New function to encode Dot Product instructions.
(do_neon_dotproduct_s): Wrapper function for signed Dot Product
instructions.
(do_neon_dotproduct_u): Wrapper function for unsigned Dot Product
instructions.
(insns): New entries for vsdot and vudot.
(arm_extensions): New entry for "dotprod".
* doc/c-arm.texi: Document new "dotprod" extension.
* testsuite/gas/arm/dotprod.s: New test source.
* testsuite/gas/arm/dotprod-illegal.s: New test source.
* testsuite/gas/arm/dotprod.d: New test.
* testsuite/gas/arm/dotprod-thumb2.d: New test.
* testsuite/gas/arm/dotprod-illegal.d: New test.
* testsuite/gas/arm/dotprod-legacy-arch.d: New test.
* testsuite/gas/arm/dotprod-illegal.l: New error file.
* testsuite/gas/arm/dotprod-legacy-arch.l: New error file.
opcodes/
* arm-dis.c (coprocessor_opcodes): New entries for vsdot and vudot.
Add support for the Imagination interAptiv MR2 MIPS32r3 processor with
the MIPS16e2 ASE as per documentation, including in particular:
1. Support for implementation-specific interAptiv MR2 COPYW and UCOPYW
MIPS16e2 instructions[1], for assembly and disassembly,
2. Support for implementation-specific interAptiv MR2 SAVE and RESTORE
regular MIPS instructions[2], for assembly and disassembly,
3. ELF binary file annotation for the interAptiv MR2 MIPS architecture
extension.
4. Support for interAptiv MR2 architecture selection for assembly, in
the form of the `-march=interaptiv-mr2' command-line option and its
corresponding `arch=interaptiv-mr2' setting for the `.set' and
`.module' pseudo-ops.
5. Support for interAptiv MR2 architecture selection for disassembly,
in the form of the `mips:interaptiv-mr2' target architecture, for
use e.g. with the `-m' command-line option for `objdump'.
Parts of this change by Matthew Fortune and Andrew Bennett.
References:
[1] "MIPS32 interAptiv Multiprocessing System Software User's Manual",
Imagination Technologies Ltd., Document Number: MD00904, Revision
02.01, June 15, 2016, Section 24.3 "MIPS16e2 Implementation Specific
Instructions", pp. 878-883
[2] same, Chapter 25 "Implementation-specific Instructions", pp. 911-917
include/
* elf/mips.h (E_MIPS_MACH_IAMR2): New macro.
(AFL_EXT_INTERAPTIV_MR2): Likewise.
* opcode/mips.h: Document new operand codes defined.
(INSN_INTERAPTIV_MR2): New macro.
(INSN_CHIP_MASK): Adjust accordingly.
(CPU_INTERAPTIV_MR2): New macro.
(cpu_is_member) <CPU_INTERAPTIV_MR2>: New case.
(MIPS16_ALL_ARGS): Rename to...
(MIPS_SVRS_ALL_ARGS): ... this.
(MIPS16_ALL_STATICS): Rename to...
(MIPS_SVRS_ALL_STATICS): ... this.
bfd/
* archures.c (bfd_mach_mips_interaptiv_mr2): New macro.
* cpu-mips.c (I_interaptiv_mr2): New enum value.
(arch_info_struct): Add "mips:interaptiv-mr2" entry.
* elfxx-mips.c (_bfd_elf_mips_mach) <E_MIPS_MACH_IAMR2>: New
case.
(mips_set_isa_flags) <bfd_mach_mips_interaptiv_mr2>: Likewise.
(bfd_mips_isa_ext) <bfd_mach_mips_interaptiv_mr2>: Likewise.
(print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise.
(mips_mach_extensions): Add `bfd_mach_mipsisa32r3' and
`bfd_mach_mips_interaptiv_mr2' entries.
* bfd-in2.h: Regenerate.
opcodes/
* mips-formats.h (INT_BIAS): New macro.
(INT_ADJ): Redefine in INT_BIAS terms.
* mips-dis.c (mips_arch_choices): Add "interaptiv-mr2" entry.
(mips_print_save_restore): New function.
(print_insn_arg) <OP_SAVE_RESTORE_LIST>: Update comment.
(validate_insn_args) <OP_SAVE_RESTORE_LIST>: Remove `abort'
call.
(print_insn_args): Handle OP_SAVE_RESTORE_LIST.
(print_mips16_insn_arg): Call `mips_print_save_restore' for
OP_SAVE_RESTORE_LIST handling, factored out from here.
* mips-opc.c (decode_mips_operand) <'-'> <'m'>: New case.
(RD_31, RD_SP, WR_SP, MOD_SP, IAMR2): New macros.
(mips_builtin_opcodes): Add "restore" and "save" entries.
* mips16-opc.c (decode_mips16_operand) <'n', 'o'>: New cases.
(IAMR2): New macro.
(mips16_opcodes): Add "copyw" and "ucopyw" entries.
binutils/
* readelf.c (get_machine_flags) <E_MIPS_MACH_IAMR2>: New case.
(print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise.
* NEWS: Mention Imagination interAptiv MR2 processor support.
gas/
* config/tc-mips.c (validate_mips_insn): Handle
OP_SAVE_RESTORE_LIST specially.
(mips_encode_save_restore, mips16_encode_save_restore): New
functions.
(match_save_restore_list_operand): Factor out SAVE/RESTORE
operand insertion into the instruction word or halfword to these
new functions.
(mips_cpu_info_table): Add "interaptiv-mr2" entry.
* doc/c-mips.texi (MIPS Options): Add `interaptiv-mr2' to the
`-march=' argument list.
The symbol address in .eh_frame may be adjusted in
_bfd_elf_discard_section_eh_frame, and the content of .eh_frame will be
adjusted in _bfd_elf_write_section_eh_frame. Therefore, we cannot insert
a relocation whose addend symbol is in .eh_frame. Othrewise, the value
may be adjusted twice.
bfd/ChangeLog
2017-06-26 Kuan-Lin Chen <rufus@andestech.com>
* elfnn-riscv.c (perform_relocation): Support the new
R_RISCV_32_PCREL relocation.
(riscv_elf_relocate_section): Likewise.
* elfxx-riscv.c (howto_table): Likewise.
(riscv_reloc_map): Likewise.
* bfd-in2.h (BFD_RELOC_RISCV_32_PCREL): New relocation.
* libbfd.h: Regenerate.
gas/ChangeLog
2017-06-26 Kuan-Lin Chen <rufus@andestech.com>
* config/tc-riscv.c (md_apply_fix) [BFD_RELOC_32]: Convert to a
R_RISCV_32_PCREL relocation.
include/ChangeLog
2017-06-26 Kuan-Lin Chen <rufus@andestech.com>
* elf/riscv.h (R_RISCV_32_PCREL): New.
=== Context ===
This patch is part of a patch series to add support for ARMv8-R
architecture. Its purpose is to add support for ARMv8-R in GAS:
instructions, build attributes and readelf.
=== Patch description ===
Although some differences exist for system registers, from GAS point of
view ARMv8-R supports the same instructions as ARMv8-A Aarch32 state
and a subset of its extensions. This patch therefore introduce a new
feature bit to distinguish the availability of the pan, ras and rdma
extensions between ARMv8-A and ARMv8-R and allow crypto, fp and simd
extensions to be used by ARMv8-R.
Most of the changes are then in the testsuite to (i) rename source files
and error output to be shared between ARMv8-A and ARMv8-R, (ii) rename
files with expected output for ARMv8-A build attributes and (iii) add
new files with expected output for ARMv8-R build attributes.
2017-06-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
binutils/
* readelf.c (arm_attr_tag_CPU_arch): Fill value for ARMv8-R.
gas/
* NEWS: Mention support for ARMv8-R architecture.
* config/tc-arm.c (arm_archs): Add entry for ARMv8-R.
(arm_extensions): Restrict pan, ras and rdma extension to
ARMv8-A and make crypto, fp and simd extensions available to
ARMv8-R.
(cpu_arch_ver): Add entry for ARMv8-R.
(aeabi_set_public_attributes): Update gas_assert for Tag_DIV_use
logic.
* testsuite/gas/arm/armv8-a+fp.s: Rename into ...
* testsuite/gas/arm/armv8-ar+fp.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a+fp.d: Specify source to assemble and
architecture to assemble for.
* testsuite/gas/arm/armv8-r+fp.d: New.
* testsuite/gas/arm/armv8-a+simd.s: Rename into ...
* testsuite/gas/arm/armv8-ar+simd.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a+simd.d: Specify source to assemble and
architecture to assemble for.
* testsuite/gas/arm/armv8-r+simd.d: New.
* testsuite/gas/arm/armv8-a-bad.s: Rename into ...
* testsuite/gas/arm/armv8-ar-bad.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a-bad.l: Rename into ...
* testsuite/gas/arm/armv8-ar-bad.l: This. Decrement line number by 1.
* testsuite/gas/arm/armv8-a-bad.d: Specify source to assemble,
architecture to assemble for and adjust error output file.
* testsuite/gas/arm/armv8-r-bad.d: New.
* testsuite/gas/arm/armv8-a-barrier.s: Rename into ...
* testsuite/gas/arm/armv8-ar-barrier.s: This.
* testsuite/gas/arm/armv8-a-barrier-arm.d: Adjust source.
* testsuite/gas/arm/armv8-a-barrier-thumb.d: Likewise.
* testsuite/gas/arm/armv8-r-barrier-arm.d: New.
* testsuite/gas/arm/armv8-r-barrier-thumb.d: New.
* testsuite/gas/arm/armv8-a-it-bad.s: Rename into ...
* testsuite/gas/arm/armv8-ar-it-bad.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a-it-bad.l: Rename into ...
* testsuite/gas/arm/armv8-ar-it-bad.l: This. Decrement line number
by 1.
* testsuite/gas/arm/armv8-a-it-bad.d: Specify source to assemble,
architecture to assemble for and adjust error output file.
* testsuite/gas/arm/armv8-r-it-bad.d: New.
* testsuite/gas/arm/armv8-a.s: Rename into ...
* testsuite/gas/arm/armv8-ar.s: This. Remove .arch directive.
* testsuite/gas/arm/armv8-a.d: Specify source to assemble and
architecture to assemble for.
* testsuite/gas/arm/armv8-r.d: New.
* testsuite/gas/arm/attr-march-armv8-r+crypto.d: New.
* testsuite/gas/arm/attr-march-armv8-r+fp.d: New.
* testsuite/gas/arm/attr-march-armv8-r+simd.d: New.
* testsuite/gas/arm/attr-march-armv8-r.d: New.
* testsuite/gas/arm/crc32.s: Rename into ...
* testsuite/gas/arm/crc32-armv8-ar.s: This.
* testsuite/gas/arm/crc32.d: Rename into ...
* testsuite/gas/arm/crc32-armv8-a.d: This. Specify source to assemble.
* testsuite/gas/arm/crc32-armv8-r.d: New.
* testsuite/gas/arm/crc32-bad.s: Rename into ...
* testsuite/gas/arm/crc32-armv8-ar-bad.s: This.
* testsuite/gas/arm/crc32-bad.d: Rename into ...
* testsuite/gas/arm/crc32-armv8-a-bad.d: This. Specify source to
assemble.
* testsuite/gas/arm/crc32-armv8-r-bad.d: New.
* testsuite/gas/arm/mask_1.s: Rename into ...
* testsuite/gas/arm/mask_1-armv8-ar.s: This.
* testsuite/gas/arm/mask_1.d: Rename into ...
* testsuite/gas/arm/mask_1-armv8-a.d: This. Specify source to
assemble.
* testsuite/gas/arm/mask_1-armv8-r.d: new.
include/
* elf/arm.h (TAG_CPU_ARCH_V8R): New macro.
* opcode/arm.h (ARM_EXT2_V8A): New macro.
(ARM_AEXT2_V8A): Rename into ...
(ARM_AEXT2_V8AR): This.
(ARM_AEXT2_V8A): New macro.
(ARM_AEXT_V8R): New macro.
(ARM_AEXT2_V8R): New macro.
(ARM_ARCH_V8R): New macro.
=== Context ===
This patch is part of a patch series to add support for ARMv8-R
architecture. Its purpose is to remove special casing for ARMv6S-M
autodetection.
=== Motivation ===
Currently, SWI and SVC mnemonics are enabled for ARMv4T and successor
architectures with extra checks in the handler function (do_t_swi) to
give an error message when ARMv6-M is targeted and some more special
casing in aeabi_set_public_attributes. This was made to exclude these
mnemonics for ARMv6-M unless the OS extension is in use.
However this logic is superfluous: there is already code to check
whether an instruction is available based on the feature bit it is part
of and whether the targeted architecture has that feature bit. This
patch aims at removing that unneeded complexity.
=== Patch description ===
The OS extension is already limited to the ARMv6-M architecture so all
this patch does is redefined availability of the ARM_EXT_OS feature bit
to not be present for ARM_ARCH_V6M. ARM_ARCH_V6SM does not need any
change either because it already includes ARM_EXT_OS.
The patch also make sure that the error message that was given by
do_t_swi when SWI/SVC is unavailable is still the same by detecting the
situation in md_assemble.
2017-06-24 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (arm_ext_v6m): Delete.
(arm_ext_v7m): Delete.
(arm_ext_m): Remove ARM_EXT_OS from the set of feature defined M
profile.
(arm_arch_v6m_only): Delete.
(do_t_swi): Remove special case for ARMv6S-M.
(md_assemble): Display error message previously in do_t_swi when
SVC is not available.
(insns): Guard swi and svc by arm_ext_os for Thumb mode.
(aeabi_set_public_attributes): Remove special case for ARMv6S-M.
include/
* opcode/arm.h (ARM_AEXT_V4TxM): Add ARM_EXT_OS bit to the set.
(ARM_AEXT_V4T): Likewise.
(ARM_AEXT_V5TxM): Likewise.
(ARM_AEXT_V5T): Likewise.
(ARM_AEXT_V6M): Mask off ARM_EXT_OS bit.
To support IBT in Intel Control-flow Enforcement Technology (CET)
instructions:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
#define GNU_PROPERTY_X86_FEATURE_1_AND 0xc0000002
#define GNU_PROPERTY_X86_FEATURE_1_IBT (1U << 0)
are added to GNU program properties to indicate that all executable
sections are compatible with IBT when ENDBR instruction starts each
valid target where an indirect branch instruction can land.
GNU_PROPERTY_X86_FEATURE_1_IBT is set on output only if it is set on
all relocatable inputs.
The followings changes are made to the Procedure Linkage Table (PLT):
1. For 64-bit x86-64, PLT is changed to
PLT0: push GOT[1]
bnd jmp *GOT[2]
nop
...
PLTn: endbr64
push namen_reloc_index
bnd jmp PLT0
together with the second PLT section:
PLTn: endbr64
bnd jmp *GOT[namen_index]
nop
BND prefix is also added so that IBT-enabled PLT is compatible with MPX.
2. For 32-bit x86-64 (x32) and i386, PLT is changed to
PLT0: push GOT[1]
jmp *GOT[2]
nop
...
PLTn: endbr64 # endbr32 for i386.
push namen_reloc_index
jmp PLT0
together with the second PLT section:
PLTn: endbr64 # endbr32 for i386.
jmp *GOT[namen_index]
nop
BND prefix isn't used since MPX isn't supported on x32 and BND registers
aren't used in parameter passing on i386.
GOT is an array of addresses. Initially, GOT[namen_index] is filled
with the address of the ENDBR instruction of the corresponding entry
in the first PLT section. The function, namen, is called via the
ENDBR instruction in the second PLT entry. GOT[namen_index] is updated
to the actual address of the function, namen, at run-time.
2 linker command line options are added:
1. -z ibtplt: Generate IBT-enabled PLT.
2. -z ibt: Generate GNU_PROPERTY_X86_FEATURE_1_IBT in GNU program
properties as well as IBT-enabled PLT.
bfd/
* elf32-i386.c (elf_i386_lazy_ibt_plt0_entry): New.
(elf_i386_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_lazy_ibt_plt0_entry): Likewise.
(elf_i386_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_pic_non_lazy_ibt_plt_entry): Likewise.
(elf_i386_eh_frame_lazy_ibt_plt): Likewise.
(elf_i386_lazy_plt_layout): Likewise.
(elf_i386_non_lazy_plt_layout): Likewise.
(elf_i386_link_hash_entry): Add plt_second.
(elf_i386_link_hash_table): Add plt_second and
plt_second_eh_frame.
(elf_i386_allocate_dynrelocs): Use the second PLT if needed.
(elf_i386_size_dynamic_sections): Use .plt.got unwind info for
the second PLT. Check the second PLT.
(elf_i386_relocate_section): Use the second PLT to resolve
PLT reference if needed.
(elf_i386_finish_dynamic_symbol): Fill and use the second PLT if
needed.
(elf_i386_finish_dynamic_sections): Set sh_entsize on the
second PLT. Generate unwind info for the second PLT.
(elf_i386_plt_type): Add plt_second.
(elf_i386_get_synthetic_symtab): Support the second PLT.
(elf_i386_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_i386_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_i386_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
* elf64-x86-64.c (elf_x86_64_lazy_ibt_plt_entry): New.
(elf_x32_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_non_lazy_ibt_plt_entry): Likewise.
(elf_x32_non_lazy_ibt_plt_entry): Likewise.
(elf_x86_64_eh_frame_lazy_ibt_plt): Likewise.
(elf_x32_eh_frame_lazy_ibt_plt): Likewise.
(elf_x86_64_lazy_ibt_plt): Likewise.
(elf_x32_lazy_ibt_plt): Likewise.
(elf_x86_64_non_lazy_ibt_plt): Likewise.
(elf_x32_non_lazy_ibt_plt): Likewise.
(elf_x86_64_get_synthetic_symtab): Support the second PLT.
(elf_x86_64_parse_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND.
(elf_x86_64_merge_gnu_properties): Support
GNU_PROPERTY_X86_FEATURE_1_AND. If info->ibt is set, turn
on GNU_PROPERTY_X86_FEATURE_1_IBT
(elf_x86_64_link_setup_gnu_properties): If info->ibt is set,
turn on GNU_PROPERTY_X86_FEATURE_1_IBT. Use IBT-enabled PLT
for info->ibtplt, info->ibt or GNU_PROPERTY_X86_FEATURE_1_IBT
is set on all relocatable inputs.
binutils/
* readelf.c (decode_x86_feature): New.
(print_gnu_property_note): Call decode_x86_feature on
GNU_PROPERTY_X86_FEATURE_1_AND.
* testsuite/binutils-all/i386/empty.d: New file.
* testsuite/binutils-all/i386/empty.s: Likewise.
* testsuite/binutils-all/i386/ibt.d: Likewise.
* testsuite/binutils-all/i386/ibt.s: Likewise.
* testsuite/binutils-all/x86-64/empty-x32.d: Likewise.
* testsuite/binutils-all/x86-64/empty.d: Likewise.
* testsuite/binutils-all/x86-64/empty.s: Likewise.
* testsuite/binutils-all/x86-64/ibt-x32.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.d: Likewise.
* testsuite/binutils-all/x86-64/ibt.s: Likewise.
include/
* bfdlink.h (bfd_link_info): Add ibtplt and ibt.
* elf/common.h (GNU_PROPERTY_X86_FEATURE_1_AND): New.
(GNU_PROPERTY_X86_FEATURE_1_IBT): Likewise.
ld/
* Makefile.am (ELF_X86_DEPS): Add $(srcdir)/emulparams/cet.sh.
* Makefile.in: Regenerated.
* NEWS: Mention GNU_PROPERTY_X86_FEATURE_1_IBT, -z ibtplt
and -z ibt.
* emulparams/cet.sh: New file.
* testsuite/ld-i386/ibt-plt-1.d: Likewise.
* testsuite/ld-i386/ibt-plt-1.s: Likewise.
* testsuite/ld-i386/ibt-plt-2.s: Likewise.
* testsuite/ld-i386/ibt-plt-2a.d: Likewise.
* testsuite/ld-i386/ibt-plt-2b.d: Likewise.
* testsuite/ld-i386/ibt-plt-2c.d: Likewise.
* testsuite/ld-i386/ibt-plt-2d.d: Likewise.
* testsuite/ld-i386/ibt-plt-3.s: Likewise.
* testsuite/ld-i386/ibt-plt-3a.d: Likewise.
* testsuite/ld-i386/ibt-plt-3b.d: Likewise.
* testsuite/ld-i386/ibt-plt-3c.d: Likewise.
* testsuite/ld-i386/ibt-plt-3d.d: Likewise.
* testsuite/ld-i386/plt-main-ibt.dd: Likewise.
* testsuite/ld-i386/plt-pie-ibt.dd: Likewise.
* testsuite/ld-i386/property-x86-empty.s: Likewise.
* testsuite/ld-i386/property-x86-ibt.s: Likewise.
* testsuite/ld-i386/property-x86-ibt1a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt1b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt2.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3a.d: Likewise.
* testsuite/ld-i386/property-x86-ibt3b.d: Likewise.
* testsuite/ld-i386/property-x86-ibt4.d: Likewise.
* testsuite/ld-i386/property-x86-ibt5.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-1.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-2d.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3.s: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3a.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3b.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3c.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise.
* testsuite/ld-x86-64/ibt-plt-3d.d: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-now.rd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt-x32.dd: Likewise.
* testsuite/ld-x86-64/plt-main-ibt.dd: Likewise.
* testsuite/ld-x86-64/property-x86-empty.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt.s: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt2.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt4.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise.
* testsuite/ld-x86-64/property-x86-ibt5.d: Likewise.
* emulparams/elf32_x86_64.sh: Source emulparams/cet.sh.
(TINY_READONLY_SECTION): Add .plt.sec.
* emulparams/elf_i386.sh: Likewise.
* emulparams/elf_x86_64.sh: Source emulparams/cet.sh.
* ld.texinfo: Document -z ibtplt and -z ibt.
* testsuite/ld-i386/i386.exp: Run IBT and IBT PLT tests.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-x86-64/pr21481b.S (check): Updated for x32.
=== Context ===
This patch is part of a patch series to add support for ARMv8-R
architecture. Its purpose is to rework the Tag_CPU_arch build attribute
value selection to (i) match architecture or CPU if specified by user
without any need for hack and (ii) match an architecture with all the
features used if in autodetection mode or return an error.
=== Motivation ===
Currently, Tag_CPU_arch build attribute value selection assumes that an
architecture is always a superset of architectures released earlier. As
such, the logic is to browse architectures in chronological order of
release and selecting the Tag_CPU_arch value of the last one to
contribute a feature used[1]/requested[2] not contributed by earlier
architectures.
[1] in case of autodetection mode
[2] otherwise, ie. in case of -mcpu/-march or associated directives
This logic fails the two objectives mentionned in the Context section.
First, due to the assumption it does an architecture can be selected
while not having all the features used/requested which fails the second
objective. Second, not doing an exact match when an architecture or CPU
is selected by the user means the wrong value is chosen when a later
architecture provides a subset of the feature bits of an earlier
architecture. This is the case for the implementation of ARMv8-R (see
later patch).
An added benefit of this patch is that it is possible to easily generate
more consistent build attribute by setting the feature bits from the
architecture matched in aeabi_set_public_attributes in autodetection
mode. This is better done as a separate patch because lots of testcase'
expected results must then be updated accordingly.
=== Patch description ===
The patch changes the main logic for Tag_CPU_arch and
Tag_CPU_arch_profile
values selection to:
- look for an exact match in case an architecture or CPU was specified
on the command line or in a directive
- select the first released architecture that provides a superset of the
feature used in the autodetection case
- select the most featureful architecture in case of -march=all
The array cpu_arch_ver is updated to include all architectures in order
to make the first point work.
Note that when looking for an exact match, the architecture with
selected extension is tried first and then only the architecture. This
is because some architectures are exactly equivalent to an earlier
architecture with its extensions selected. ARMv6S-M (= ARMv6-M + OS
extension) and ARMv6KZ (ARMv6K + security extension) are two such
examples.
Other adjustments are also necessary in aeabi_set_public_attributes to
make this change work.
1) The logic to set Tag_ARM_ISA_use and Tag_THUMB_ISA_use must check the
absence of feature bit used/requested to decide whether to give the
default value for empty files (see EABI attribute defaults test). It was
previously checking that arch == 0 which would only happen if no feature
bit could be matched by any architecture, ie there is no feature bit to
match.
2) A fallback to a superset match must exist when no_cpu_selected ()
returns true. This is because aeabi_set_public_attributes is called
again after relaxation and at this point selected_cpu is set from the
previous execution of that function. There is therefore no way to check
whether the user specified an architecture or CPU.
3) Tag_CPU_arch lines are removed from expected output when the
detected architecture should be pre-ARMv4, since 0 is the Tag_CPU_arch
value for pre-ARMv4 architectures and default value for an absent entry
is 0.
2017-06-21 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (fpu_any): Defined from FPU_ANY.
(cpu_arch_ver): Add all architectures and sort by release date.
(have_ext_for_needed_feat_p): New.
(get_aeabi_cpu_arch_from_fset): New.
(aeabi_set_public_attributes): Call above function to determine
Tag_CPU_arch and Tag_CPU_arch_profile values. Adapt Tag_ARM_ISA_use
and Tag_THUMB_ISA_use selection logic to check absence of feature bit
accordingly.
* testsuite/gas/arm/attr-march-armv1.d: Fix expected Tag_CPU_arch build
attribute value.
* testsuite/gas/arm/attr-march-armv2.d: Likewise.
* testsuite/gas/arm/attr-march-armv2a.d: Likewise.
* testsuite/gas/arm/attr-march-armv2s.d: Likewise.
* testsuite/gas/arm/attr-march-armv3.d: Likewise.
* testsuite/gas/arm/attr-march-armv3m.d: Likewise.
* testsuite/gas/arm/pr12198-2.d: Likewise.
include/
* opcode/arm.h (FPU_ANY): New macro.
This is a follow-up to
[PATCH 0/6] Unify the disassembler selection in gdb and objdump
https://sourceware.org/ml/binutils/2017-05/msg00192.html
that is, opcodes is able to select the right disassembler, so gdb
doesn't have to select them. Instead, gdb can just use
default_print_insn. As a result, these print_insn_XXX are not used
out of opcodes, so this patch also moves their declarations from
include/dis-asm.h to opcodes/disassemble.h. With this change,
GDB doesn't use any print_insn_XXX directly any more.
gdb:
2017-06-14 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_gdb_print_insn): Call
default_print_insn instead of print_insn_aarch64.
* arm-tdep.c (gdb_print_insn_arm): Call
default_print_insn instead of print_insn_big_arm
and print_insn_little_arm.
* i386-tdep.c (i386_print_insn): Call default_print_insn
instead of print_insn_i386.
* ia64-tdep.c (ia64_print_insn): Call
default_print_insn instead of print_insn_ia64.
* mips-tdep.c (gdb_print_insn_mips): Call
default_print_insn instead of print_insn_big_mips
and print_insn_little_mips.
* spu-tdep.c (gdb_print_insn_spu): Call default_print_insn
instead of print_insn_spu.
include:
2017-06-14 Yao Qi <yao.qi@linaro.org>
* dis-asm.h (print_insn_aarch64): Move it to opcodes/disassemble.h.
(print_insn_big_arm, print_insn_big_mips): Likewise.
(print_insn_i386, print_insn_ia64): Likewise.
(print_insn_little_arm, print_insn_little_mips): Likewise.
(print_insn_spu): Likewise.
opcodes:
2017-06-14 Yao Qi <yao.qi@linaro.org>
* aarch64-dis.c: Include disassemble.h instead of dis-asm.h.
* arm-dis.c: Likewise.
* ia64-dis.c: Likewise.
* mips-dis.c: Likewise.
* spu-dis.c: Likewise.
* disassemble.h (print_insn_aarch64): New declaration, moved from
include/dis-asm.h.
(print_insn_big_arm, print_insn_big_mips): Likewise.
(print_insn_i386, print_insn_ia64): Likewise.
(print_insn_little_arm, print_insn_little_mips): Likewise.
This commit adds a new linker feature: the ability to resolve section
groups as part of a relocatable link.
Currently section groups are automatically resolved when performing a
final link, and are carried through when performing a relocatable link.
By carried through this means that one copy of each section group (from
all the copies that might be found in all the input files) is placed
into the output file. Sections that are part of a section group will
not match input section specifiers within a linker script and are
forcibly kept as separate sections.
There is a slight resemblance between section groups and common
section. Like section groups, common sections are carried through when
performing a relocatable link, and resolved (allocated actual space)
only at final link time.
However, with common sections there is an ability to force the linker to
allocate space for the common sections when performing a relocatable
link, there's currently no such ability for section groups.
This commit adds such a mechanism. This new facility can be accessed in
two ways, first there's a command line switch --force-group-allocation,
second, there's a new linker script command FORCE_GROUP_ALLOCATION. If
one of these is used when performing a relocatable link then the linker
will resolve the section groups as though it were performing a final
link, the section group will be deleted, and the members of the group
will be placed like normal input sections. If there are multiple copies
of the group (from multiple input files) then only one copy of the group
members will be placed, the duplicate copies will be discarded.
Unlike common sections that have the --no-define-common command line
flag, and INHIBIT_COMMON_ALLOCATION linker script command there is no
way to prevent group resolution during a final link, this is because the
ELF gABI specifically prohibits the presence of SHT_GROUP sections in a
fully linked executable. However, the code as written should make
adding such a feature trivial, setting the new resolve_section_groups
flag to false during a final link should work as you'd expect.
bfd/ChangeLog:
* elf.c (_bfd_elf_make_section_from_shdr): Don't initially mark
SEC_GROUP sections as SEC_EXCLUDE.
(bfd_elf_set_group_contents): Replace use of abort with an assert.
(assign_section_numbers): Use resolve_section_groups flag instead
of relocatable link type.
(_bfd_elf_init_private_section_data): Use resolve_section_groups
flag instead of checking the final_link flag for part of the
checks in here. Fix white space as a result.
* elflink.c (elf_link_input_bfd): Use resolve_section_groups flag
instead of relocatable link type.
(bfd_elf_final_link): Likewise.
include/ChangeLog:
* bfdlink.h (struct bfd_link_info): Add new resolve_section_groups
flag.
ld/ChangeLog:
* ld.h (struct args_type): Add force_group_allocation field.
* ldgram.y: Add support for FORCE_GROUP_ALLOCATION.
* ldlex.h: Likewise.
* ldlex.l: Likewise.
* lexsup.c: Likewise.
* ldlang.c (unique_section_p): Check resolve_section_groups flag
not the relaxable link flag.
(lang_add_section): Discard section groups when we're resolving
groups. Clear the SEC_LINK_ONCE flag if we're resolving section
groups.
* ldmain.c (main): Initialise resolve_section_groups flag in
link_info based on command line flags.
* testsuite/ld-elf/group11.d: New file.
* testsuite/ld-elf/group12.d: New file.
* testsuite/ld-elf/group12.ld: New file.
* NEWS: Mention new features.
* ld.texinfo (Options): Document --force-group-allocation.
(Miscellaneous Commands): Document FORCE_GROUP_ALLOCATION.
ELFv2 functions with localentry:0 are those with a single entry point,
ie. global entry == local entry, and that have no requirement on r2 or
r12, and guarantee r2 is unchanged on return. Such an external
function can be called via the PLT without saving r2 or restoring it
on return, avoiding a common load-hit-store for small functions. The
optimization is attractive. The TOC pointer load-hit-store is a major
reason why calls to small functions that need no register saves, or
with shrink-wrap, no register saves on a fast path, are slow on
powerpc64le.
To be safe, this optimization needs ld.so support to check that the
run-time matches link-time function implementation. If a function
in a shared library with st_other localentry non-zero is called
without saving and restoring r2, r2 will be trashed on return, leading
to segfaults. For that reason the optimization does not happen for
weak functions since a weak definition is a fairly solid hint that the
function will likely be overridden. I'm also not enabling the
optimization by default unless glibc-2.26 is detected, which should
have the ld.so checks implemented.
bfd/
* elf64-ppc.c (struct ppc_link_hash_table): Add has_plt_localentry0.
(ppc64_elf_merge_symbol_attribute): Merge localentry bits from
dynamic objects.
(is_elfv2_localentry0): New function.
(ppc64_elf_tls_setup): Default params->plt_localentry0.
(plt_stub_size): Adjust size for tls_get_addr_opt stub.
(build_tls_get_addr_stub): Use a simpler stub when r2 is not saved.
(ppc64_elf_size_stubs): Leave stub_type as ppc_stub_plt_call for
optimized localentry:0 stubs.
(ppc64_elf_build_stubs): Save r2 in ELFv2 __glink_PLTresolve.
(ppc64_elf_relocate_section): Leave nop unchanged for optimized
localentry:0 stubs.
(ppc64_elf_finish_dynamic_sections): Set PPC64_OPT_LOCALENTRY in
DT_PPC64_OPT.
* elf64-ppc.h (struct ppc64_elf_params): Add plt_localentry0.
include/
* elf/ppc64.h (PPC64_OPT_LOCALENTRY): Define.
ld/
* emultempl/ppc64elf.em (params): Init plt_localentry0 field.
(enum ppc64_opt): New, replacing OPTION_* defines. Add
OPTION_PLT_LOCALENTRY, and OPTION_NO_PLT_LOCALENTRY.
(PARSE_AND_LIST_*): Support --plt-localentry and --no-plt-localentry.
* testsuite/ld-powerpc/elfv2so.d: Update.
* testsuite/ld-powerpc/powerpc.exp (TLS opt 5): Use --no-plt-localentry.
* testsuite/ld-powerpc/tlsopt5.d: Update.
This patch extracts ARC CPU definitions from gas/config/tc-arc.c (cpu_types)
into a separate file arc-cpu.def. This will allow reuse of CPU type definition
in multiple places where it might be needed, for example in disassembler. This
will help ensure that gas and disassembker use same option values for CPUs.
arc-cpu.def file relies on preprocessor macroses which are defined somewhere
else. This for example multiple C files to include arc-cpu.def, but define
different macroses, therefore creating different structures.
include/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* elf/arc-cpu.def: New file.
gas/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* config/tc-arc.c (cpu_types): Include arc-cpu.def
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Nowadays, opcodes/disassemble.c:disassembler selects the proper
disassembler according to ABFD only. However, it actually
selects disassemblers according to arch, mach, endianess, and
abfd. This patch adds them to the parameters of disassembler,
so that its caller can still select disassemblers in case that
abfd is NULL (a typical case in GDB).
There isn't any functionality change.
binutils:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* objdump.c (disassemble_data): Caller update.
include:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* dis-asm.h (disassembler): Update declaration.
opcodes:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* disassemble.c (disassembler): Add arguments a, big and mach.
Use them.
sim/common:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* sim-trace.c (trace_disasm): Caller update.
It is required to parse instructions like ldb.x.a.di.
include/
2017-05-23 Claudiu Zissulescu <claziss@synopsys.com>
* opcode/arc.h (MAX_INSN_FLGS): Update to 4.
dynamic_ref_after_ir_def is a little odd compared to other symbol
flags in that as the name suggests, it is set only for certain
references after a definition. It turns out that setting a flag for
any non-ir reference from a dynamic object can be used to solve the
problem for which this flag was invented, which I think is a cleaner.
This patch does that, and sets non_ir_ref only for regular object
references.
include/
* bfdlink.h (struct bfd_link_hash_entry): Update non_ir_ref
comment. Rename dynamic_ref_after_ir_def to non_ir_ref_dynamic.
ld/
* plugin.c (is_visible_from_outside): Use non_ir_ref_dynamic.
(plugin_notice): Set non_ir_ref for references from regular
objects, non_ir_ref_dynamic for references from dynamic objects.
bfd/
* elf64-ppc.c (add_symbol_adjust): Transfer non_ir_ref_dynamic.
* elflink.c (elf_link_add_object_symbols): Update to use
non_ir_ref_dynamic.
(elf_link_input_bfd): Test non_ir_ref_dynamic in addition to
non_ir_ref.
* linker.c (_bfd_generic_link_add_one_symbol): Likewise.
Add MIPS16e2 ASE support as per the architecture specification[1],
including in particular:
1. A new ELF ASE flag to mark MIPS16e2 binaries.
2. MIPS16e2 instruction assembly support, including a relaxation update
to use LUI rather than an LI/SLL instruction pair for loading the
high part of 32-bit addresses.
3. MIPS16e2 instruction disassembly support, including updated rules for
extended forms of instructions that are now subdecoded and therefore
do not alias to the original MIPS16 ISA revision instructions even
for encodings that are not valid in the MIPS16e2 instruction set.
Add `-mmips16e2' and `-mno-mips16e2' GAS command-line options and their
corresponding `mips16e2' and `no-mips16e2' settings for the `.set' and
`.module' pseudo-ops. Control the availability of the MT ASE subset of
the MIPS16e2 instruction set with a combination of these controls and
the preexisting MT ASE controls.
Parts of this change by Matthew Fortune and Andrew Bennett.
References:
[1] "MIPS32 Architecture for Programmers: MIPS16e2 Application-Specific
Extension Technical Reference Manual", Imagination Technologies
Ltd., Document Number: MD01172, Revision 01.00, April 26, 2016
include/
* elf/mips.h (AFL_ASE_MIPS16E2): New macro.
(AFL_ASE_MASK): Adjust accordingly.
* opcode/mips.h: Document new operand codes defined.
(mips_operand_type): Add OP_REG28 enum value.
(INSN2_SHORT_ONLY): Update description.
(ASE_MIPS16E2, ASE_MIPS16E2_MT): New macros.
bfd/
* elfxx-mips.c (print_mips_ases): Handle MIPS16e2 ASE.
opcodes/
* mips-dis.c (mips_arch_choices): Add ASE_MIPS16E2 and
ASE_MIPS16E2_MT flags to the unnamed MIPS16 entry.
(mips_convert_abiflags_ases): Handle the AFL_ASE_MIPS16E2 flag.
(print_insn_arg) <OP_REG28>: Add handler.
(validate_insn_args) <OP_REG28>: Handle.
(print_mips16_insn_arg): Handle MIPS16 instructions that require
32-bit encoding and 9-bit immediates.
(print_insn_mips16): Handle MIPS16 instructions that require
32-bit encoding and MFC0/MTC0 operand decoding.
* mips16-opc.c (decode_mips16_operand) <'>', '9', 'G', 'N', 'O'>
<'Q', 'T', 'b', 'c', 'd', 'r', 'u'>: Add handlers.
(RD_C0, WR_C0, E2, E2MT): New macros.
(mips16_opcodes): Add entries for MIPS16e2 instructions:
GP-relative "addiu" and its "addu" spelling, "andi", "cache",
"di", "ehb", "ei", "ext", "ins", GP-relative "lb", "lbu", "lh",
"lhu", and "lw" instructions, "ll", "lui", "lwl", "lwr", "mfc0",
"movn", "movtn", "movtz", "movz", "mtc0", "ori", "pause",
"pref", "rdhwr", "sc", GP-relative "sb", "sh" and "sw"
instructions, "swl", "swr", "sync" and its "sync_acquire",
"sync_mb", "sync_release", "sync_rmb" and "sync_wmb" aliases,
"xori", "dmt", "dvpe", "emt" and "evpe". Add split
regular/extended entries for original MIPS16 ISA revision
instructions whose extended forms are subdecoded in the MIPS16e2
ISA revision: "li", "sll" and "srl".
binutils/
* readelf.c (print_mips_ases): Handle MIPS16e2 ASE.
* NEWS: Mention MIPS16e2 ASE support.
gas/
* config/tc-mips.c (RELAX_MIPS16_ENCODE): Add `e2' flag.
(RELAX_MIPS16_E2): New macro.
(RELAX_MIPS16_PIC, RELAX_MIPS16_SYM32, RELAX_MIPS16_NOMACRO)
(RELAX_MIPS16_USER_SMALL, RELAX_MIPS16_USER_EXT)
(RELAX_MIPS16_DSLOT, RELAX_MIPS16_JAL_DSLOT)
(RELAX_MIPS16_EXTENDED, RELAX_MIPS16_MARK_EXTENDED)
(RELAX_MIPS16_CLEAR_EXTENDED, RELAX_MIPS16_ALWAYS_EXTENDED)
(RELAX_MIPS16_MARK_ALWAYS_EXTENDED)
(RELAX_MIPS16_CLEAR_ALWAYS_EXTENDED, RELAX_MIPS16_MACRO)
(RELAX_MIPS16_MARK_MACRO, RELAX_MIPS16_CLEAR_MACRO): Shift bits.
(mips16_immed_extend): New prototype.
(options): Add OPTION_MIPS16E2 and OPTION_NO_MIPS16E2 enum
values.
(md_longopts): Add "mmips16e2" and "mno-mips16e2" options.
(mips_ases): Add "mips16e2" entry.
(mips_set_ase): Handle MIPS16e2 ASE.
(insn_insert_operand): Explicitly handle immediates with MIPS16
instructions that require 32-bit encoding.
(is_opcode_valid_16): Pass enabled ASE bitmask on to
`opcode_is_member'.
(validate_mips_insn): Explicitly handle immediates with MIPS16
instructions that require 32-bit encoding.
(operand_reg_mask) <OP_REG28>: Add handler.
(match_reg28_operand): New function.
(match_operand) <OP_REG28>: Add handler.
(append_insn): Pass ASE_MIPS16E2 setting to RELAX_MIPS16_ENCODE.
(match_mips16_insn): Handle MIPS16 instructions that require
32-bit encoding and `V' and `u' operand codes.
(mips16_ip): Allow any characters except from `.' in opcodes.
(mips16_immed_extend): Handle 9-bit immediates. Do not shuffle
immediates whose width is not one of these listed.
(md_estimate_size_before_relax): Handle MIPS16e2 relaxation.
(mips_relax_frag): Likewise.
(md_convert_frag): Likewise.
(mips_convert_ase_flags): Handle MIPS16e2 ASE.
* doc/as.texinfo (Target MIPS options): Add `-mmips16e2' and
`-mno-mips16e2' options.
(-mmips16e2, -mno-mips16e2): New options.
* doc/c-mips.texi (MIPS Options): Add `-mmips16e2' and
`-mno-mips16e2' options.
(MIPS ASE Instruction Generation Overrides): Add `.set mips16e2'
and `.set nomips16e2'.
We need to make an IR symbol visible if it is defined in an IR object
and referenced in a dynamic object. When --as-needed is used, since
linker removes the IR symbol reference of the dynamic object if the
dynamic object isn't needed in the first pass, the IR definition isn't
visible to the dynamic object even if the dynamic object becomes needed
in the second pass. Add dynamic_ref_after_ir_def to bfd_link_hash_entry
to track IR symbol which is defined in an IR object and later referenced
in a dynamic object. dynamic_ref_after_ir_def is preserved when restoring
the symbol table for unneeded dynamic object.
bfd/
PR ld/21382
* elflink.c (elf_link_add_object_symbols): Preserve
dynamic_ref_after_ir_def when restoring the symbol table for
unneeded dynamic object.
include/
PR ld/21382
* bfdlink.h (bfd_link_hash_entry): Add dynamic_ref_after_ir_def.
ld/
PR ld/21382
* plugin.c (is_visible_from_outside): Symbol may be visible
from outside if dynamic_ref_after_ir_def is set.
(plugin_notice): Set dynamic_ref_after_ir_def if the symbol is
defined in an IR object and referenced in a dynamic object.
* testsuite/ld-plugin/lto.exp: Run PR ld/21382 tests.
* testsuite/ld-plugin/pr21382a.c: New file.
* testsuite/ld-plugin/pr21382b.c: Likewise.
-z nodynamic-undefined-weak is only implemented for x86. (The sparc
backend has some support code but doesn't enable the option by
including ld/emulparams/dynamic_undefined_weak.sh, and since the
support looks like it may be broken I haven't enabled it.) This patch
adds the complementary -z dynamic-undefined-weak, extends both options
to affect building of shared libraries as well as executables, and
adds support for the option on powerpc.
include/
* bfdlink.h (struct bfd_link_info <dynamic_undefined_weak>):
Revise comment.
bfd/
* elflink.c (_bfd_elf_adjust_dynamic_symbol): Hide undefweak
or make dynamic for info->dynamic_undefined_weak 0 and 1.
* elf32-ppc.c:Formatting.
(ensure_undefweak_dynamic): Don't make dynamic when
info->dynamic_undefined_weak is zero.
(allocate_dynrelocs): Discard undefweak dyn_relocs for
info->dynamic_undefined_weak. Discard undef dyn_relocs when
not default visibility. Discard undef and undefweak
dyn_relocs earlier.
(ppc_elf_relocate_section): Adjust to suit.
* elf64-ppc.c: Formatting.
(ensure_undefweak_dynamic): Don't make dynamic when
info->dynamic_undefined_weak is zero.
(allocate_dynrelocs): Discard undefweak dyn_relocs for
info->dynamic_undefined_weak. Discard them earlier.
ld/
* ld.texinfo (dynamic-undefined-weak): Document.
(nodynamic-undefined-weak): Document that this option now can
be used with shared libs.
* emulparams/dynamic_undefined_weak.sh: Support -z
dynamic-undefined-weak.
* emulparams/elf32ppccommon.sh: Include dynamic_undefined_weak.sh.
* testsuite/ld-undefined/weak-undef.exp (undef_weak_so),
(undef_weak_exe): New. Use them. Add -z dynamic-undefined-weak
and -z nodynamic-undefined-weak tests.
* Makefile.am: Update powerpc dependencies.
* Makefile.in: Regenerate.
PPC_OPCODE_* renumbered to fill the gaps left by previous patches,
and reordered chronologically just because. I kept PPC_OPCODE_TMR
because presumably it might be used in future APUinfo for e6500.
include/
* opcode/ppc.h (PPC_OPCODE_*): Renumber and order chronologically.
(PPC_OPCODE_SPE): Comment on this and other bits used for APUinfo.
opcodes/
* ppc-dis.c (ppc_opts): Formatting. Set PPC_OPCODE_TMR for e6500.
* ppc-opc.c (powerpc_opcodes <mftmr, mttmr>): Remove now
unnecessary E6500.
This bit is also useless as it can be replaced with PPC_OPCODE_POWER9.
Defining the VSX2 and VSX3 selection based on cpu bits also lets the
assembler/disassembler distinguish between the power7 VSX opcodes and
the power8 ones. Note that this change means -mvsx now reverts back
to just adding the power7 VSX insns.
include/
* opcode/ppc.h (PPC_OPCODE_VSX3): Delete.
opcodes/
* ppc-dis.c (ppc_opts): Remove PPC_OPCODE_VSX3.
* ppc-opc.c (PPCVSX2): Define as PPC_OPCODE_POWER8.
(PPCVSX3): Define as PPC_OPCODE_POWER9.
This bit is worse than useless. Using it prevents the assembler and
disassembler distinguishing between opcodes added for power8 and those
added for power9.
include/
* opcode/ppc.h (PPC_OPCODE_ALTIVEC2): Delete.
opcodes/
* ppc-dis.c (ppc_opts): Remove PPC_OPCODE_ALTIVEC2.
* ppc-opc.c (PPCVEC2): Define as PPC_OPCODE_POWER8|PPC_OPCODE_E6500.
(PPCVEC3): Define as PPC_OPCODE_POWER9.
include * dis-asm.h: Add prototypes for wasm32 disassembler.
opcodes * Makefile.am: Add wasm32-dis.c.
* configure.ac: Add wasm32-dis.c to wasm32 target.
* disassemble.c: Add wasm32 disassembler code.
* wasm32-dis.c: New file.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
* po/opcodes.pot: Regenerate.
gas * testsuite/gas/wasm32/allinsn.d: Adjust test for disassembler
changes.
* testsuite/gas/wasm32/disass.d: New test.
* testsuite/gas/wasm32/disass.s: New test.
* testsuite/gas/wasm32/disass-2.d: New test.
* testsuite/gas/wasm32/disass-2.s: New test.
* testsuite/gas/wasm32/reloc.d: Adjust test for changed reloc
names.
* testsuite/gas/wasm32/reloc.s: Update test for changed assembler
syntax.
* testsuite/gas/wasm32/wasm32.exp: Run new tests. Expect allinsn
test to succeed.
The memory disassemble_info::disassembler_options points to is always
owned by the client. I.e., that field is an non-owning, observing
pointer. Thus const makes sense.
Are the include/ and opcodes/ bits OK?
Tested on x86_64 Fedora 23, built with --enable-targets=all.
include/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* dis-asm.h (disassemble_info) <disassembler_options>: Now a
"const char *".
(next_disassembler_option): Constify.
opcodes/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* arc-dis.c (parse_option, parse_disassembler_options): Constify.
* arm-dis.c (parse_arm_disassembler_options): Constify.
* ppc-dis.c (powerpc_init_dialect): Constify local.
* vax-dis.c (parse_disassembler_options): Constify.
gdb/ChangeLog:
2017-04-05 Pedro Alves <palves@redhat.com>
* arm-tdep.c (show_disassembly_style_sfunc): Constify local.
* disasm.c (set_disassembler_options): Constify local.
* i386-tdep.c (i386_print_insn): Remove cast and FIXME comment.
Mark an ALLOC section, which should be placed in special memory area,
with SHF_GNU_MBIND. Its sh_info field indicates the special memory
type. GNU_MBIND section names start with ".mbind" so that they are
placed as orphan sections by linker. All input GNU_MBIND sections
with the same sh_type, sh_flags and sh_info are placed in one output
GNU_MBIND section. In executable and shared object, create a
GNU_MBIND segment for each GNU_MBIND section and its segment type is
PT_GNU_MBIND_LO plus the sh_info value. Each GNU_MBIND segment is
aligned at page boundary.
The assembler syntax:
.section .mbind.foo,"adx",%progbits
^ 0: Special memory type.
|
'd' for SHF_GNU_MBIND.
.section .mbind.foo,"adx",%progbits,0x1
^ 1: Special memory type.
|
'd' for SHF_GNU_MBIND.
.section .mbind.bar,"adG",%progbits,.foo_group,comdat,0x2
^ 2: Special memory type.
|
'd' for SHF_GNU_MBIND.
bfd/
* elf.c (get_program_header_size): Add a GNU_MBIND segment for
each GNU_MBIND section and align GNU_MBIND section to page size.
(_bfd_elf_map_sections_to_segments): Create a GNU_MBIND
segment for each GNU_MBIND section.
(_bfd_elf_init_private_section_data): Copy sh_info from input
for GNU_MBIND section.
binutils/
* NEWS: Mention support for ELF SHF_GNU_MBIND and
PT_GNU_MBIND_XXX.
* readelf.c (get_segment_type): Handle PT_GNU_MBIND_XXX.
(get_elf_section_flags): Handle SHF_GNU_MBIND.
(process_section_headers): Likewise.
* testsuite/binutils-all/mbind1.s: New file.
* testsuite/binutils-all/objcopy.exp: Run readelf test on
mbind1.s.
gas/
* NEWS: Mention support for ELF SHF_GNU_MBIND.
* config/obj-elf.c (section_match): New.
(get_section): Match both sh_info and group name.
(obj_elf_change_section): Add argument for sh_info. Pass both
sh_info and group name to get_section. Issue an error for
SHF_GNU_MBIND section without SHF_ALLOC. Set sh_info.
(obj_elf_parse_section_letters): Set SHF_GNU_MBIND for 'd'.
(obj_elf_section): Support SHF_GNU_MBIND section info.
* config/obj-elf.h (obj_elf_change_section): Add argument for
sh_info.
* config/tc-arm.c (start_unwind_section): Pass 0 as sh_info to
obj_elf_change_section.
* config/tc-ia64.c (obj_elf_vms_common): Likewise.
* config/tc-microblaze.c (microblaze_s_data): Likewise.
(microblaze_s_sdata): Likewise.
(microblaze_s_rdata): Likewise.
(microblaze_s_bss): Likewise.
* config/tc-mips.c (s_change_section): Likewise.
* config/tc-msp430.c (msp430_profiler): Likewise.
* config/tc-rx.c (parse_rx_section): Likewise.
* config/tc-tic6x.c (tic6x_start_unwind_section): Likewise.
* doc/as.texinfo: Document 'd' for SHF_GNU_MBIND.
* testsuite/gas/elf/elf.exp: Run section12a, section12b and
section13.
* testsuite/gas/elf/section10.d: Updated.
* testsuite/gas/elf/section10.s: Likewise.
* testsuite/gas/elf/section12.s: New file.
* testsuite/gas/elf/section12a.d: Likewise.
* testsuite/gas/elf/section12b.d: Likewise.
* testsuite/gas/elf/section13.l: Likewise.
* testsuite/gas/elf/section13.d: Likewise.
* testsuite/gas/elf/section13.s: Likewise.
include/
* elf/common.h (PT_GNU_MBIND_NUM): New.
(PT_GNU_MBIND_LO): Likewise.
(PT_GNU_MBIND_HI): Likewise.
(SHF_GNU_MBIND): Likewise.
ld/
* NEWS: Mention support for ELF SHF_GNU_MBIND and
PT_GNU_MBIND_XXX.
* emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Place
input GNU_MBIND sections with the same type, attributes and
sh_info field into a single output GNU_MBIND section.
* testsuite/ld-elf/elf.exp: Run mbind2a and mbind2b.
* testsuite/ld-elf/mbind1.s: New file.
* testsuite/ld-elf/mbind1a.d: Likewise.
* testsuite/ld-elf/mbind1b.d: Likewise.
* testsuite/ld-elf/mbind1c.d: Likewise.
* testsuite/ld-elf/mbind2a.s: Likewise.
* testsuite/ld-elf/mbind2b.c: Likewise.
We missed a "_gp" when changing the GP symbol. To make sure that
doesn't happen again, we now use the same definition everywhere (thanks,
Nick).
include/ChangeLog:
2017-04-03 Palmer Dabbelt <palmer@dabbelt.com>
* elf/riscv.h (RISCV_GP_SYMBOL): New define.
bfd/ChangeLog:
2017-04-03 Palmer Dabbelt <palmer@dabbelt.com>
* elfnn-riscv.c (GP_NAME): Delete.
(riscv_global_pointer_value): Change GP_NAME to RISCV_GP_SYMBOL.
(_bfd_riscv_relax_lui): Likewise.
opcodes/ChangeLog:
2017-04-03 Palmer Dabbelt <palmer@dabbelt.com>
* riscv-dis.c (riscv_disassemble_insn): Change "_gp" to
RISCV_GP_SYMBOL.
This adds -Mraw for PowerPC objdump, a disassembler option to display
the underlying machine instruction rather than aliases. For example,
"rlwinm" always rather than "rotlwi" when the instruction is
performing a simple rotate.
binutils/
* doc/binutils.texi (objdump): Document PowerPC -M options.
gas/
* config/tc-ppc.c (md_parse_option): Reject -mraw.
include/
* opcode/ppc.h (PPC_OPCODE_RAW): Define.
(PPC_OPCODE_*): Make them all unsigned long long constants.
opcodes/
* ppc-dis.c (ppc_opts): Set PPC_OPCODE_PPC for "any" flags. Add
"raw" option.
(lookup_powerpc): Don't special case -1 dialect. Handle
PPC_OPCODE_RAW.
(print_insn_powerpc): Mask out PPC_OPCODE_ANY on first
lookup_powerpc call, pass it on second.
include * elf/wasm32.h: New file to support wasm32 architecture.
bfd * cpu-wasm32.c: New file to support wasm32 architecture.
* elf32-wasm32.c: New file to support wasm32 architecture.
* Makefile.am: Add wasm32 architecture.
* archures.c: Likewise.
* config.bfd: Likewise.
* configure.ac: Likewise.
* targets.c: Likewise.
This patch removes the vx2 facility flag. It will not be used by GCC
and was a misnomer anyway.
Committed to mainline and 2.28 branch.
include/ChangeLog:
2017-03-21 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* opcode/s390.h (S390_INSTR_FLAG_VX2): Remove.
(S390_INSTR_FLAG_FACILITY_MASK): Adjust value.
gas/ChangeLog:
2017-03-21 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c (s390_parse_cpu): Remove S390_INSTR_FLAG_VX2
from cpu_table. Remove vx2, and novx2 from cpu_flags.
opcodes/ChangeLog:
2017-03-21 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-mkopc.c (main): Remove vx2 check.
* s390-opc.txt: Remove vx2 instruction flags.
Instructions for loading or storing 16/32B data from one address type to
another.
gas/ChangeLog
* testsuite/gas/arc/nps400-11.s: New file.
* testsuite/gas/arc/nps400-11.d: New file.
include/ChangeLog
* opcode/arc.h (insn_class_t): Add DMA class.
opcodes/ChangeLog
* arc-nps400-tbl.h: Add cp32/cp16 instructions format.
* arc-opc.c: Add F_NPS_NA, NPS_DMA_IMM_ENTRY, NPS_DMA_IMM_OFFSET.
(insert_nps_imm_offset): New function.
(extract_nps_imm_offset): New function.
(insert_nps_imm_entry): New function.
(extract_nps_imm_entry): New function.
include * elf/common.h (GNU_BUILD_ATTRIBUTE_SHORT_ENUM): New GNU BUILD
note type.
binutils * readelf.c (print_gnu_build_attribute_name): Add support for
GNU_BUILD_ATTRIBUTE_SHORT_ENUM.
Property type and datasz are always 4 bytes for both 32-bit and 64-bit
objects. Property values for GNU_PROPERTY_X86_ISA_1_USED and
GNU_PROPERTY_X86_ISA_1_NEEDED are 4 bytes for both i386 and x86-64
objects. We should also check GNU_PROPERTY_LOPROC and
GNU_PROPERTY_LOUSER.
binutils/
PR binutils/21231
* readelf.c (decode_x86_isa): Change argument to unsigned int.
(print_gnu_property_note): Retrieve property type and datasz as
4-byte integer. Consolidate property datasz check. Check
GNU_PROPERTY_LOPROC and GNU_PROPERTY_LOUSER.
* testsuite/binutils-all/i386/pr21231a.d: New file.
* testsuite/binutils-all/i386/pr21231a.s: Likewise.
* testsuite/binutils-all/i386/pr21231b.d: Likewise.
* testsuite/binutils-all/i386/pr21231b.s: Likewise.
* testsuite/binutils-all/x86-64/pr21231a.d: Likewise.
* testsuite/binutils-all/x86-64/pr21231a.s: Likewise.
* testsuite/binutils-all/x86-64/pr21231b.d: Likewise.
* testsuite/binutils-all/x86-64/pr21231b.s: Likewise.
include/
PR binutils/21231
* elf/common.h (GNU_PROPERTY_LOPROC): New.
(GNU_PROPERTY_HIPROC): Likewise.
(GNU_PROPERTY_LOUSER): Likewise.
(GNU_PROPERTY_HIUSER): Likewise.
This commit adds support to GDB so that it can modify the disassembler-options
value that is passed to the disassembler, similar to objdump's -M option.
Currently, the only supported targets are ARM, PowerPC and S/390, but
adding support for a new target(s) is not difficult.
include/
* dis-asm.h (disasm_options_t): New typedef.
(parse_arm_disassembler_option): Remove prototype.
(set_arm_regname_option): Likewise.
(get_arm_regnames): Likewise.
(get_arm_regname_num_options): Likewise.
(disassemble_init_s390): New prototype.
(disassembler_options_powerpc): Likewise.
(disassembler_options_arm): Likewise.
(disassembler_options_s390): Likewise.
(remove_whitespace_and_extra_commas): Likewise.
(disassembler_options_cmp): Likewise.
(next_disassembler_option): New inline function.
(FOR_EACH_DISASSEMBLER_OPTION): New macro.
opcodes/
* disassemble.c Include "safe-ctype.h".
(disassemble_init_for_target): Handle s390 init.
(remove_whitespace_and_extra_commas): New function.
(disassembler_options_cmp): Likewise.
* arm-dis.c: Include "libiberty.h".
(NUM_ELEM): Delete.
(regnames): Use long disassembler style names.
Add force-thumb and no-force-thumb options.
(NUM_ARM_REGNAMES): Rename from this...
(NUM_ARM_OPTIONS): ...to this. Use ARRAY_SIZE.
(get_arm_regname_num_options): Delete.
(set_arm_regname_option): Likewise.
(get_arm_regnames): Likewise.
(parse_disassembler_options): Likewise.
(parse_arm_disassembler_option): Rename from this...
(parse_arm_disassembler_options): ...to this. Make static.
Use new FOR_EACH_DISASSEMBLER_OPTION macro to scan over options.
(print_insn): Use parse_arm_disassembler_options.
(disassembler_options_arm): New function.
(print_arm_disassembler_options): Handle updated regnames.
* ppc-dis.c: Include "libiberty.h".
(ppc_opts): Add "32" and "64" entries.
(ppc_parse_cpu): Use ARRAY_SIZE and disassembler_options_cmp.
(powerpc_init_dialect): Add break to switch statement.
Use new FOR_EACH_DISASSEMBLER_OPTION macro.
(disassembler_options_powerpc): New function.
(print_ppc_disassembler_options): Use ARRAY_SIZE.
Remove printing of "32" and "64".
* s390-dis.c: Include "libiberty.h".
(init_flag): Remove unneeded variable.
(struct s390_options_t): New structure type.
(options): New structure.
(init_disasm): Rename from this...
(disassemble_init_s390): ...to this. Add initializations for
current_arch_mask and option_use_insn_len_bits_p. Remove init_flag.
(print_insn_s390): Delete call to init_disasm.
(disassembler_options_s390): New function.
(print_s390_disassembler_options): Print using information from
struct 'options'.
* po/opcodes.pot: Regenerate.
binutils/
* objdump.c (main): Use remove_whitespace_and_extra_commas.
gdb/
* NEWS: Mention new set/show disassembler-options commands.
* doc/gdb.texinfo: Document new set/show disassembler-options commands.
* disasm.c: Include "arch-utils.h", "gdbcmd.h" and "safe-ctype.h".
(prospective_options): New static variable.
(gdb_disassembler::gdb_disassembler): Initialize
m_di.disassembler_options.
(gdb_buffered_insn_length_init_dis): Initilize di->disassembler_options.
(get_disassembler_options): New function.
(set_disassembler_options): Likewise.
(set_disassembler_options_sfunc): Likewise.
(show_disassembler_options_sfunc): Likewise.
(disassembler_options_completer): Likewise.
(_initialize_disasm): Likewise.
* disasm.h (get_disassembler_options): New prototype.
(set_disassembler_options): Likewise.
* gdbarch.sh (gdbarch_disassembler_options): New variable.
(gdbarch_verify_disassembler_options): Likewise.
* gdbarch.c: Regenerate.
* gdbarch.h: Likewise.
* arm-tdep.c (num_disassembly_options): Delete.
(set_disassembly_style): Likewise.
(arm_disassembler_options): New static variable.
(set_disassembly_style_sfunc): Convert short style name into long
option name. Call set_disassembler_options.
(show_disassembly_style_sfunc): New function.
(arm_gdbarch_init): Call set_gdbarch_disassembler_options and
set_gdbarch_verify_disassembler_options.
(_initialize_arm_tdep): Delete regnames variable and update callers.
(arm_disassembler_options): Initialize.
(disasm_options): New variable.
(num_disassembly_options): Rename from this...
(num_disassembly_styles): ...to this. Compute by scanning through
disasm_options.
(valid_disassembly_styles): Initialize using disasm_options.
Remove calls to parse_arm_disassembler_option, get_arm_regnames and
set_arm_regname_option.
Pass show_disassembly_style_sfunc to the "disassembler" setshow command.
* rs6000-tdep.c (powerpc_disassembler_options): New static variable.
(rs6000_gdbarch_init): Call set_gdbarch_disassembler_options and
set_gdbarch_verify_disassembler_options.
* s390-tdep.c (s390_disassembler_options): New static variable.
(s390_gdbarch_init):all set_gdbarch_disassembler_options and
set_gdbarch_verify_disassembler_options.
gdb/testsuite/
* gdb.arch/powerpc-power.exp: Delete test.
* gdb.arch/powerpc-power.s: Likewise.
* gdb.disasm/disassembler-options.exp: New test.
* gdb.arch/powerpc-altivec.exp: Likewise.
* gdb.arch/powerpc-altivec.s: Likewise.
* gdb.arch/powerpc-altivec2.exp: Likewise.
* gdb.arch/powerpc-altivec2.s: Likewise.
* gdb.arch/powerpc-altivec3.exp: Likewise.
* gdb.arch/powerpc-altivec3.s: Likewise.
* gdb.arch/powerpc-power7.exp: Likewise.
* gdb.arch/powerpc-power7.s: Likewise.
* gdb.arch/powerpc-power8.exp: Likewise.
* gdb.arch/powerpc-power8.s: Likewise.
* gdb.arch/powerpc-power9.exp: Likewise.
* gdb.arch/powerpc-power9.s: Likewise.
* gdb.arch/powerpc-vsx.exp: Likewise.
* gdb.arch/powerpc-vsx.s: Likewise.
* gdb.arch/powerpc-vsx2.exp: Likewise.
* gdb.arch/powerpc-vsx2.s: Likewise.
* gdb.arch/powerpc-vsx3.exp: Likewise.
* gdb.arch/powerpc-vsx3.s: Likewise.
* gdb.arch/arm-disassembler-options.exp: Likewise.
* gdb.arch/powerpc-disassembler-options.exp: Likewise.
* gdb.arch/s390-disassembler-options.exp: Likewise.
This came up because I was looking at ld/tmpdir/addpcis.o and noticed
the odd addends on REL16DX_HA. They ought to both be -4. The error
crept in due REL16DX_HA howto being pc-relative (as indeed it should
be), and code at gas/write.c:1001 after this comment
/* Make it pc-relative. If the back-end code has not
selected a pc-relative reloc, cancel the adjustment
we do later on all pc-relative relocs. */
*not* cancelling the pc-relative adjustment. So I've made a dummy
non-relative split reloc so that the generic code handles this, rather
than attempting to add hacks later in md_apply_fix which would not be
very robust. Having the new internal reloc also makes it easy to
support
addpcis rx,sym@ha
as an equivalent to
addpcis rx,(sym-0f)@ha
0:
The patch also fixes overflow checking, which must test whether the
addi will overflow too since @l relocs don't have any overflow check.
Lastly, since I was poking at md_apply_fix, I arranged to have the
generic gas/write.c code emit errors for subtraction expressions where
we lack reloc support.
include/
* elf/ppc64.h (R_PPC64_16DX_HA): New. Expand fake reloc comment.
* elf/ppc.h (R_PPC_16DX_HA): Likewise.
bfd/
* reloc.c (BFD_RELOC_PPC_16DX_HA): New.
* elf64-ppc.c (ppc64_elf_howto_raw <R_PPC64_16DX_HA>): New howto.
(ppc64_elf_reloc_type_lookup): Translate new bfd reloc.
(ppc64_elf_ha_reloc): Correct overflow test on REL16DX_HA.
(ppc64_elf_relocate_section): Likewise.
* elf32-ppc.c (ppc_elf_howto_raw <R_PPC_16DX_HA>): New howto.
(ppc_elf_reloc_type_lookup): Translate new bfd reloc.
(ppc_elf_check_relocs): Handle R_PPC_16DX_HA to pacify gcc.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
gas/
* config/tc-ppc.c (md_assemble): Use BFD_RELOC_PPC_16DX_HA for addpcis.
(md_apply_fix): Remove fx_subsy check. Move code converting to
pcrel reloc earlier and handle BFD_RELOC_PPC_16DX_HA. Remove code
emiiting errors on seeing fx_pcrel set on unexpected relocs, as
that is done now by the generic code via..
* config/tc-ppc.h (TC_FORCE_RELOCATION_SUB_LOCAL): ..this. Define.
(TC_VALIDATE_FIX_SUB): Define.
ld/
* testsuite/ld-powerpc/addpcis.d: Define ext1 and ext2 at
limits of addpcis range.
This patch supports some additions to the SVE architecture prior to
its public release.
include/
* opcode/aarch64.h (AARCH64_OPND_SVE_ADDR_RI_S4x16)
(AARCH64_OPND_SVE_IMM_ROT1, AARCH64_OPND_SVE_IMM_ROT2)
(AARCH64_OPND_SVE_Zm3_INDEX, AARCH64_OPND_SVE_Zm3_22_INDEX)
(AARCH64_OPND_SVE_Zm4_INDEX): New aarch64_opnds.
opcodes/
* aarch64-tbl.h (OP_SVE_HMH, OP_SVE_VMU_HSD, OP_SVE_VMVU_HSD)
(OP_SVE_VMVV_HSD, OP_SVE_VMVVU_HSD, OP_SVE_VM_HSD, OP_SVE_VUVV_HSD)
(OP_SVE_VUV_HSD, OP_SVE_VU_HSD, OP_SVE_VVVU_H, OP_SVE_VVVU_S)
(OP_SVE_VVVU_HSD, OP_SVE_VVV_D, OP_SVE_VVV_D_H, OP_SVE_VVV_H)
(OP_SVE_VVV_HSD, OP_SVE_VVV_S, OP_SVE_VVV_S_B, OP_SVE_VVV_SD_BH)
(OP_SVE_VV_BHSDQ, OP_SVE_VV_HSD, OP_SVE_VZVV_HSD, OP_SVE_VZV_HSD)
(OP_SVE_V_HSD): New macros.
(OP_SVE_VMU_SD, OP_SVE_VMVU_SD, OP_SVE_VM_SD, OP_SVE_VUVV_SD)
(OP_SVE_VU_SD, OP_SVE_VVVU_SD, OP_SVE_VVV_SD, OP_SVE_VZVV_SD)
(OP_SVE_VZV_SD, OP_SVE_V_SD): Delete.
(aarch64_opcode_table): Add new SVE instructions.
(aarch64_opcode_table): Use imm_rotate{1,2} instead of imm_rotate
for rotation operands. Add new SVE operands.
* aarch64-asm.h (ins_sve_addr_ri_s4): New inserter.
(ins_sve_quad_index): Likewise.
(ins_imm_rotate): Split into...
(ins_imm_rotate1, ins_imm_rotate2): ...these two inserters.
* aarch64-asm.c (aarch64_ins_imm_rotate): Split into...
(aarch64_ins_imm_rotate1, aarch64_ins_imm_rotate2): ...these two
functions.
(aarch64_ins_sve_addr_ri_s4): New function.
(aarch64_ins_sve_quad_index): Likewise.
(do_misc_encoding): Handle "MOV Zn.Q, Qm".
* aarch64-asm-2.c: Regenerate.
* aarch64-dis.h (ext_sve_addr_ri_s4): New extractor.
(ext_sve_quad_index): Likewise.
(ext_imm_rotate): Split into...
(ext_imm_rotate1, ext_imm_rotate2): ...these two extractors.
* aarch64-dis.c (aarch64_ext_imm_rotate): Split into...
(aarch64_ext_imm_rotate1, aarch64_ext_imm_rotate2): ...these two
functions.
(aarch64_ext_sve_addr_ri_s4): New function.
(aarch64_ext_sve_quad_index): Likewise.
(aarch64_ext_sve_index): Allow quad indices.
(do_misc_decoding): Likewise.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc.h (FLD_SVE_i3h, FLD_SVE_rot1, FLD_SVE_rot2): New
aarch64_field_kinds.
(OPD_F_OD_MASK): Widen by one bit.
(OPD_F_NO_ZR): Bump accordingly.
(get_operand_field_width): New function.
* aarch64-opc.c (fields): Add new SVE fields.
(operand_general_constraint_met_p): Handle new SVE operands.
(aarch64_print_operand): Likewise.
* aarch64-opc-2.c: Regenerate.
gas/
* doc/c-aarch64.texi: Document that sve implies fp16, simd and compnum.
* config/tc-aarch64.c (parse_vector_type_for_operand): Allow .q
to be used with SVE registers.
(parse_operands): Handle new SVE operands.
(aarch64_features): Make "sve" require F16 rather than FP. Also
require COMPNUM.
* testsuite/gas/aarch64/sve.s: Add tests for new instructions.
Include compnum tests.
* testsuite/gas/aarch64/sve.d: Update accordingly.
* testsuite/gas/aarch64/sve-invalid.s: Add tests for new instructions.
* testsuite/gas/aarch64/sve-invalid.l: Update accordingly. Also
update expected output for new FMOV and MOV alternatives.
This patch adds a named "compnum" feature for the ARMv8.3-A FCADD
and FCMLA extensions.
include/
* opcode/aarch64.h (AARCH64_FEATURE_COMPNUM): New macro.
(AARCH64_ARCH_V8_3): Include AARCH64_FEATURE_COMPNUM.
opcodes/
* aarch64-tbl.h (aarch64_feature_simd_v8_3): Replace with...
(aarch64_feature_compnum): ...this.
(SIMD_V8_3): Replace with...
(COMPNUM): ...this.
(CNUM_INSN): New macro.
(aarch64_opcode_table): Use it for the complex number instructions.
gas/
* doc/c-aarch64.texi: Add a "compnum" entry.
* config/tc-aarch64.c (aarch64_features): Likewise,
* testsuite/gas/aarch64/advsimd-compnum.s: New test.
* testsuite/gas/aarch64/advsimd-compnum.d: Likewise.
This stops powerpc gas blithely accepting such nonsense as
"addi %f4,%cr3,%r31".
PR 21118
gas/
* NEWS: Mention powerpc register checks.
* config/tc-ppc.c (struct pd_reg): Make value a short. Add flags.
(pre_defined_registers): Delete fpscr and pmr entries. Set
register type in flags.
(cr_names): Set type in flags.
(reg_name_search): Return pointer to struct pd_reg rather than value.
(register_name): Adjust to suit. Set X_md from flags.
(ppc_parse_name): Likewise.
(ppc_optimize_expr): New function.
(md_assemble): Verify expresion reg flags match operand.
* config/tc-ppc.h (md_optimize_expr): Define.
(ppc_optimize_expr): Declare.
include/
* opcode/ppc.h (PPC_OPERAND_*): Reassign values, regs first.
(PPC_OPERAND_SPR, PPC_OPERAND_GQR): Define.
opcodes/
* ppc-opc.c (powerpc_operands): Flag SPR, SPRG and TBR entries
with PPC_OPERAND_SPR. Flag PSQ and PSQM with PPC_OPERAND_GQR.
The weaker release consistency support of ARMv8.3-A is allowed as an optional
extension for ARMv8.2-A, so separate command line option and feature flag is
added: -march=armv8.2-a+rcpc turns LDAPR, LDAPRB, LDAPRH instructions on.
opcodes/
* aarch64-tbl.h (RCPC, RCPC_INSN): Define.
(aarch64_opcode_table): Use RCPC_INSN.
include/
* opcode/aarch64.h (AARCH64_FEATURE_RCPC): Define.
(AARCH64_ARCH_V8_3): Update.
gas/
* config/tc-aarch64.c (aarch64_features): Add rcpc.
* doc/c-aarch64.texi (AArch64 Extensions): Document rcpc.
* testsuite/gas/aarch64/ldst-exclusive-armv8_3.d: Rename to ...
* testsuite/gas/aarch64/ldst-rcpc.d: This.
* testsuite/gas/aarch64/ldst-exclusive-armv8_3.s: Rename to ...
* testsuite/gas/aarch64/ldst-rcpc.s: This.
* testsuite/gas/aarch64/ldst-rcpc-armv8_2.d: New test.
gas * config/tc-riscv.c (riscv_set_arch): Whitelist the "q" ISA
extension.
(riscv_after_parse_args): Set FLOAT_ABI_QUAD when the Q ISA is
enabled and no other ABI is specified.
include * opcode/riscv-opc.h: Add support for the "q" ISA extension.
opcodes * riscv-opc.c (riscv-opcodes): Add support for the "q" ISA
extension.
* riscv-opcodes/all-opcodes: Likewise.
Add ASMACRO instruction support as per the MIPS16e ASE architecture
specifications [1][2], completing MIPS16e instruction set support.
[1] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS32 Architecture", MIPS
Technologies, Inc., Document Number: MD00076, Revision 2.63, July
16, 2013, Section 4.1 "MIPS16e Instruction Descriptions", p. 65
[2] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS64 Architecture", MIPS
Technologies, Inc., Document Number: MD00077, Revision 2.60, June
25, 2008, Section 1.1 "MIPS16e Instruction Descriptions", p. 66
include/
* opcode/mips.h: Document `0', `1', `2', `3', `4' and `s'
operand codes.
opcodes/
* mips16-opc.c (decode_mips16_operand): Add `0', `1', `2', `3',
`4' and `s' operand codes.
(mips16_opcodes): Add "asmacro" entry.
binutils/
* testsuite/binutils-all/mips/mips16-extend-insn.d: Update for
ASMACRO support.
gas/
* testsuite/gas/mips/mips16-asmacro.d: New test.
* testsuite/gas/mips/mips16-32@mips16-asmacro.d: New test.
* testsuite/gas/mips/mips16-64@mips16-asmacro.d: New test.
* testsuite/gas/mips/mips16-asmacro.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
Replace `0' and `4' operand codes with `.' and `F' respectively to free
up the `0'-`4' consecutive range. No functional change.
gas/
* config/tc-mips.c (mips16_macro_build): Replace `0' and `4'
operand codes with `.' and `F' respectively.
(mips16_macro): Likewise.
include/
* opcode/mips.h: Replace `0' and `4' operand codes with `.' and
`F' respectively.
opcodes/
* mips16-opc.c (decode_mips16_operand): Replace `0' and `4'
operand codes with `.' and `F' respectively.
(mips16_opcodes): Likewise.
Identify non-extensible instructions in the MIPS16 opcode table and
disallow their use with the `.e' instruction size suffix in assembly and
do not interpret any EXTEND prefix present as a part of the instruction
in disassembly.
According to all versions of the MIPS16 ASE specifications the following
instructions encodings are not extensible [1][2][3][4][5][6]: I8/MOV32R,
I8/MOVR32, all RRR minor opcodes, all RR minor opcodes except from DSRA
and DSRL, and EXTEND itself, and as from revision 2.50 of the MIPS16e
ASE specifications it has been further clarified what was previously
implied, that non-extesiable instructions when preceded with an EXTEND
prefix must cause a Reserved Instruction exception [3][5].
Therefore in the presence of an EXTEND prefix none of these instructions
are supposed to be handled as extended instructions and supporting these
forms in disassembly causes confusion, and in the case of the RRR major
opcode it also clashes with the ASMACRO encoding.
References:
[1] "Product Description, MIPS16 Application-Specific Extension",
Version 1.3, MIPS Technologies, Inc., 970130, Table 3. "MIPS16
Instruction Set Summary", p. 5
[2] same, Table 5 "RR Minor Opcodes (RR-type instructions)", p.10
[3] "MIPS32 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS32 Architecture", MIPS
Technologies, Inc., Document Number: MD00076, Revision 2.63, July
16, 2013, Section 3.9 "MIPS16e Instruction Summaries", pp. 37-39
[4] same, Section 3.15 "Instruction Bit Encoding", pp. 46-49
[5] "MIPS64 Architecture for Programmers, Volume IV-a: The MIPS16e
Application-Specific Extension to the MIPS64 Architecture", MIPS
Technologies, Inc., Document Number: MD00077, Revision 2.60, June
25, 2008, Section 1.9 "MIPS16e Instruction Summaries", pp. 38-41
[6] same, Section 1.15 "Instruction Bit Encoding", pp. 48-51
include/
* opcode/mips.h (INSN2_SHORT_ONLY): New macro.
gas/
* config/tc-mips.c (is_size_valid_16): Disallow a `.e' suffix
instruction size override for INSN2_SHORT_ONLY opcode table
entries.
* testsuite/gas/mips/mips16-extend-swap.d: Adjust output.
* testsuite/gas/mips/mips16-macro-e.l: Adjust error messages.
* testsuite/gas/mips/mips16-32@mips16-macro-e.l: Adjust error
messages.
* testsuite/gas/mips/mips16e-32@mips16-macro-e.l: Adjust error
messages.
* testsuite/gas/mips/mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16-32@mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16-64@mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-insn-e.d: New test.
* testsuite/gas/mips/mips16-32@mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16-64@mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16e-32@mips16-insn-t.d: New test.
* testsuite/gas/mips/mips16-insn-e.l: New stderr output.
* testsuite/gas/mips/mips16-insn-t.l: New stderr output.
* testsuite/gas/mips/mips16-32@mips16-insn-e.l: New stderr
output.
* testsuite/gas/mips/mips16-64@mips16-insn-e.l: New stderr
output.
* testsuite/gas/mips/mips16e-32@mips16-insn-e.l: New stderr
output.
* testsuite/gas/mips/mips16-32@mips16-insn-t.l: New stderr
output.
* testsuite/gas/mips/mips16-64@mips16-insn-t.l: New stderr
output.
* testsuite/gas/mips/mips16e-32@mips16-insn-t.l: New stderr
output.
* testsuite/gas/mips/mips16-insn-e.s: New test source.
* testsuite/gas/mips/mips16-insn-t.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
opcodes/
* mips-dis.c (print_insn_mips16): Disallow EXTEND prefix
matching for INSN2_SHORT_ONLY opcode table entries.
* mips16-opc.c (SH): New macro.
(mips16_opcodes): Set SH in `pinfo2' for non-extensible
instruction entries: "nop", "addu", "and", "break", "cmp",
"daddu", "ddiv", "ddivu", "div", "divu", "dmult", "dmultu",
"drem", "dremu", "dsllv", "dsll", "dsrav", "dsra", "dsrlv",
"dsrl", "dsubu", "exit", "entry", "jalr", "jal", "jr", "j",
"jalrc", "jrc", "mfhi", "mflo", "move", "mult", "multu", "neg",
"not", "or", "rem", "remu", "sllv", "sll", "slt", "sltu",
"srav", "sra", "srlv", "srl", "subu", "xor", "sdbbp", "seb",
"seh", "sew", "zeb", "zeh", "zew" and "extend".
binutils/
* testsuite/binutils-all/mips/mips16-extend-insn.d: New test.
* testsuite/binutils-all/mips/mips16-extend-insn.s: New test
source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
gas/
* doc/c-lm32.texi: Fix chars with high bit set.
* testsuite/gas/bfin/vector2.s: Likewise.
gold/
* arm.cc: Fix comment chars with high bit set.
include/
* coff/pe.h: Fix comment chars with high bit set.
* opcode/xgate.h: Likewise.
ld/
* testsuite/ld-scripts/sysroot-prefix.exp: Fix chars with high bit set.
Switch to 32-bit MIPS16 opcode table entry interpretation, similar to
how the microMIPS opcode table is handled, for both the `match' and
`mask' fields, removing special casing for JAL and JALX instructions and
their `a' and `i' operand codes throughout, while retaining automatic
processing of extendable opcodes in assembly and disassembly.
In assembly disallow size enforcement suffixes as appropriate: `.t' for
both 32-bit instructions and macros and `.e' for macros only, making
macro handling consistent with the microMIPS instruction set.
In disassembly fully decode EXTEND prefixes prepended to unsupported
instruction encodings (according to the ISA selection) rather than
dumping them as hexadecimal data along with the following instruction,
removing all special casing for the EXTEND prefix and making its
handling rely on its opcode table entry, except where it is considered a
part of an extendable instruction.
include/
* opcode/mips.h (mips_opcode_32bit_p): New inline function.
gas/
* config/tc-mips.c (micromips_insn_length): Use
`mips_opcode_32bit_p'.
(is_size_valid): Adjust description.
(is_size_valid_16): New function.
(validate_mips_insn): Use `mips_opcode_32bit_p' in MIPS16
operand decoding.
(validate_mips16_insn): Remove `a' and `i' operand code special
casing, use `mips_opcode_32bit_p' to determine instruction
width.
(append_insn): Adjust forced MIPS16 instruction size
determination.
(match_mips16_insn): Likewise. Don't shift the instruction's
opcode with the `a' and `i' operand codes. Use
`mips_opcode_32bit_p' in operand decoding.
(match_mips16_insns): Check for forced instruction size's
validity.
(mips16_ip): Don't force instruction size in the `noautoextend'
mode.
* testsuite/gas/mips/mips16-jal-e.d: New test.
* testsuite/gas/mips/mips16-jal-t.d: New test.
* testsuite/gas/mips/mips16-macro-e.d: New test.
* testsuite/gas/mips/mips16-macro-t.d: New test.
* testsuite/gas/mips/mips16-jal-t.l: New stderr output.
* testsuite/gas/mips/mips16-macro-e.l: New stderr output.
* testsuite/gas/mips/mips16-macro-t.l: New stderr output.
* testsuite/gas/mips/mips16-jal-e.s: New test source.
* testsuite/gas/mips/mips16-jal-t.s: New test source.
* testsuite/gas/mips/mips16-macro-e.s: New test source.
* testsuite/gas/mips/mips16-macro-t.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
opcodes/
* mips-dis.c (print_mips16_insn_arg): Always handle `extend' and
`insn' together, with `extend' as the high-order 16 bits.
(match_kind): New enum.
(print_insn_mips16): Rework for 32-bit instruction matching.
Do not dump EXTEND prefixes here.
* mips16-opc.c (mips16_opcodes): Move "extend" entry to the end.
Recode `match' and `mask' fields as 32-bit in absolute "jal" and
"jalx" entries.
binutils/
* testsuite/binutils-all/mips/mips16-extend-noinsn.d: Adjust
test for separate EXTEND prefix disassembly.
We've decided to standardize on two flags for RISC-V: "-march" sets the
target architecture (which determines which instructions can be
generated), and "-mabi" sets the target ABI. We needed to rework this
because the old flag set didn't support soft-float or single-float ABIs,
and didn't support an x32-style ABI on RISC-V.
Additionally, we've changed the behavior of the -march flag: it's now a
lot stricter and only parses things we can actually understand.
Additionally, it's now lowercase-only: the rationale is that while the
RISC-V ISA manual specifies that ISA strings are case-insensitive, in
Linux-land things are usually case-sensitive. Since this flag can be
used to determine library paths, we didn't want to bake some
case-insensitivity in there that would case trouble later.
This patch implements these two new flags and removes the old flags that
could conflict with these. There wasn't a RISC-V release before, so we
want to just support a clean flag set.
include/
* elf/riscv.h (EF_RISCV_SOFT_FLOAT): Don't define.
(EF_RISCV_FLOAT_ABI, EF_RISCV_FLOAT_ABI_SOFT): Define.
(EF_RISCV_FLOAT_ABI_SINGLE, EF_RISCV_FLOAT_ABI_DOUBLE): Define.
(EF_RISCV_FLOAT_ABI_QUAD): Define.
bfd/
* elfnn-riscv.c (_bfd_riscv_elf_merge_private_bfd_data): Use
EF_RISCV_FLOAT_ABI_SOFT instead of EF_RISCV_SOFT_FLOAT.
binutils/
* readelf.c (get_machine_flags): Use
EF_RISCV_FLOAT_ABI_{SOFT,SINGLE,DOBULE,QUAD) instead of
EF_RISCV_{SOFT,HARD}_FLOAT.
gas/
* config/tc-riscv.h (xlen): Delete.
* config/tc-riscv.c (xlen): Make static.
(abi_xlen): New variable.
(options): Replace OPTION_{M32,M64,MSOFT_FLOAT,MHARD_FLOAT,MRVC}
with OPTION_MABI.
(md_longopts): Likewise.
(md_parse_option): Likewise.
(riscv_elf_final_processing): Likewise.
* doc/as.texinfo (Target RISC-V options): Likewise.
* doc/c-riscv.texi (OPTIONS): Likewise.
* config/tc-riscv.c (float_mode): Removed.
(float_abi): New type, specifies the floating-point ABI.
(riscv_set_abi): New function.
(riscv_add_subset): Only allow lower-case ISA names and require
them to start with "rv".
(riscv_after_parse_args): Likewise.
opcodes/
* riscv-dis.c (riscv_disassemble_insn): Default to the ELF's
XLEN when none is provided.
Before this commit we didn't cleanly support CFI directives because the
internal offsets used to get relaxed which broke them. This patch
significantly reworks how we handle linker relaxations:
* DWARF is now properly supported
* There is a ".option norelax" to disable relaxations, for when users
write assembly that can't be relaxed (if it's to be later patched up,
for example).
* There is an additional _RELAX relocation that specifies when previous
relocations can be relaxed.
We're in the process of documenting the RISC-V ELF ABI, which will
include documentation of our relocations
https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md
but we expect that this relocation set will remain ABI compatible in the
future (ie, it's safe to release).
Thanks to Kuan-Lin Chen for figuring out how to correctly relax the
debug info!
include/
* elf/riscv.h: Add R_RISCV_TPREL_I through R_RISCV_SET32.
bfd/
* reloc.c (BFD_RELOC_RISCV_TPREL_I): New relocation.
(BFD_RELOC_RISCV_TPREL_S): Likewise.
(BFD_RELOC_RISCV_RELAX): Likewise.
(BFD_RELOC_RISCV_CFA): Likewise.
(BFD_RELOC_RISCV_SUB6): Likewise.
(BFD_RELOC_RISCV_SET8): Likewise.
(BFD_RELOC_RISCV_SET8): Likewise.
(BFD_RELOC_RISCV_SET16): Likewise.
(BFD_RELOC_RISCV_SET32): Likewise.
* elfnn-riscv.c (perform_relocation): Handle the new
relocations.
(_bfd_riscv_relax_tls_le): Likewise.
(_bfd_riscv_relax_align): Likewise.
(_bfd_riscv_relax_section): Likewise.
(howto_table): Likewise.
(riscv_reloc_map): Likewise.
(relax_func_t): New type.
(_bfd_riscv_relax_call): Add reserve_size argument, which
controls the maximal offset pessimism. Correct type of max_alignment.
(_bfd_riscv_relax_lui): Likewise.
(_bfd_riscv_relax_tls_le): Likewise.
(_bfd_riscv_relax_align): Likewise.
(_bfd_riscv_relax_section): Compute the required reserve size
when relocating and use it to when calling relax_func.
* bfd-in2.h: Regenerate.
* libbfd.h: Likewise.
gas/
* config/tc-riscv.c (riscv_set_options): Add relax.
(riscv_opts): Likewise.
(s_riscv_option): Add relax and norelax.
(riscv_apply_const_reloc): New function.
(append_insn): Move constant relocation handling to
riscv_apply_const_reloc.
(md_pcrel_from): Likewise.
(parse_relocation): Skip BFD_RELOC_UNUSED.
(md_pcrel_from): Handle BFD_RELOC_RISCV_SUB6,
BFD_RELOC_RISCV_RELAX, BFD_RELOC_RISCV_CFA.
(md_apply_fix): Likewise.
(riscv_pre_output_hook): New function.
* config/tc-riscv.h (md_pre_output_hook): Define.
(riscv_pre_output_hook): Declare.
(DWARF_CIE_DATA_ALIGNMENT): Always -4.
Respect any ASE flags recorded in ELF file structures for the purpose of
selecting instructions to be disassembled, preventing code from being
hex-dumped even though having been clearly indicated as valid at the
assembly time. Use date from the MIPS ABI flags structure if present,
and otherwise there may be an MDMX ASE flag set in the ELF file header.
For backwards compatibility only set extra flags and do not clear any,
preserving all previously set by the architecture selected to be
disassembled for.
include/
* elf/mips.h (Elf_Internal_ABIFlags_v0): Also declare struct
typedef as `elf_internal_abiflags_v0'.
bfd/
* bfd-in.h (elf_internal_abiflags_v0): New struct declaration.
(bfd_mips_elf_get_abiflags): New prototype.
* elfxx-mips.c (bfd_mips_elf_get_abiflags): New function.
* bfd-in2.h: Regenerate.
opcodes/
* mips-dis.c (mips_convert_abiflags_ases): New function.
(set_default_mips_dis_options): Also infer ASE flags from ELF
file structures.
binutils/
* testsuite/binutils-all/mips/mips-ase-1.d: New test.
* testsuite/binutils-all/mips/mips-ase-2.d: New test.
* testsuite/binutils-all/mips/mips-ase-3.d: New test.
* testsuite/binutils-all/mips/mips-ase-1.s: New test source.
* testsuite/binutils-all/mips/mips-ase-2.s: New test source.
* testsuite/binutils-all/mips/mips.exp: Run the new tests.
The internal CN register representation for coprocessor fields used in aarch64
sys, sysl instructions are removed in this patch.
After the change, those fields are represented as immediate. Related checks are
added as well.
opcodes/
* aarch64-opc.c (aarch64_opnd_qualifiers): New CR value range
qualifier.
(operand_general_constraint_met_p): Remove case for CP_REG.
(aarch64_print_operand): Print CRn, CRm operand using imm field.
* aarch64-tbl.h (QL_SYS): Use CR qualifier.
(QL_SYSL): Likewise.
(aarch64_opcode_table): Change CRn, CRm operand class and type.
* aarch64-opc-2.c : Regenerate.
* aarch64-asm-2.c : Likewise.
* aarch64-dis-2.c : Likewise.
include/
* opcode/aarch64.h (aarch64_operand_class): Remove
AARCH64_OPND_CLASS_CP_REG.
(enum aarch64_opnd): Change AARCH64_OPND_Cn to AARCH64_OPND_CRn,
AARCH64_OPND_Cm to AARCH64_OPND_CRm.
(aarch64_opnd_qualifier): Define AARCH64_OPND_QLF_CR qualifier.
gas/
* config/tc-aarch64.c (AARCH64_REG_TYPES): Remove CN register.
(get_reg_expected_msg): Remove CN register case.
(parse_operands): rewrite parser for CRn, CRm operand.
(reg_names): Remove CN register.
* testsuite/gas/aarch64/diagnostic.s: Add a new test case.
* testsuite/gas/aarch64/diagnostic.l: Adjust error message.
This code has never been used throughout the repository history, and
likely not before either, as due to the assymetry of MIPS16 instruction
set encoding there are no 32-bit shift operations having their immediate
shift count placed in the position of the usual `rx' instruction field.
gas/
* config/tc-mips.c (mips16_macro_build) <'>'>: Remove case.
include/
* opcode/mips.h: Remove references to `>' operand code.
opcodes/
* mips16-opc.c (decode_mips16_operand) <'>'>: Remove cases.
ARMv8.3 is an architectural extension of ARMv8. Add the
feature macro and -march=armv8.3-a gas command line option
for the ARM target.
https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions
gas/
* config/tc-arm.c (arm_archs): Add "armv8.3-a".
* doc/c-arm.texi (-march): Add "armv8.3-a".
include/
* opcode/arm.h (ARM_EXT2_V8_3A, ARM_AEXT2_V8_3A): New.
(ARM_ARCH_V8_3A): New.
When the assembler finds an instruction which is part of a higher
opcode architecture it bumps the current opcode architecture. For
example:
$ echo "mwait" | as -bump
{standard input}: Assembler messages:
{standard input}:1: Warning: architecture bumped from "v6" to "v9m" on "mwait"
However, when two instructions pertaining to the same opcode
architecture but associated to different SPARC hardware capabilities
are found in the input stream, and no GAS architecture is specified in
the command line, the assembler bangs:
$ echo "mwait; wr %g0,%g1,%mcdper" | as -bump
{standard input}: Assembler messages:
{standard input}:1: Warning: architecture bumped from "v6" to "v9m" on "mwait"
{standard input}:1: Error: Hardware capability "sparc5" not enabled for "wr".
... and it should'nt, as WRMCDPER pertains to the same architecture
level than MWAIT.
This patch fixes this by extending the definition of sparc opcode
architectures to contain a set of hardware capabilities and making the
assembler to take these capabilities into account when updating the
set of allowed hwcaps when an architecture bump is triggered by some
instruction.
This way, hwcaps associated to architecture levels are maintained in
opcodes, while the assembler keeps the flexibiity of defining GAS
architectures including additional hwcaps (like -Asparcfmaf or the
v8plus* variants).
A test covering this failure case is included.
gas/ChangeLog:
2016-11-22 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c: Move HWS_* and HWS2_* definitions to
opcodes/sparc-opc.c.
(sparc_arch): Clarify the new role of the hwcap_allowed and
hwcap2_allowed fields.
(sparc_arch_table): Remove HWS_* and HWS2_* instances from
hwcap_allowed and hwcap2_allowed respectively.
(md_parse_option): Include the opcode arch hwcaps when processing
-A.
(sparc_ip): Use the current opcode arch hwcaps to update
hwcap_allowed, as well of the hwcaps of the instruction triggering
the bump.
* testsuite/gas/sparc/hwcaps-bump.s: New file.
* testsuite/gas/sparc/hwcaps-bump.l: Likewise.
* testsuite/gas/sparc/sparc.exp (gas_64_check): Run tests in
hwcaps-bump.
include/ChangeLog:
2016-11-22 Jose E. Marchesi <jose.marchesi@oracle.com>
* opcode/sparc.h (sparc_opcode_arch): New fields hwcaps and
hwcaps2.
opcodes/ChangeLog:
2016-11-22 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-opc.c (HWS_V8): Definition moved from
gas/config/tc-sparc.c.
(HWS_V9): Likewise.
(HWS_VA): Likewise.
(HWS_VB): Likewise.
(HWS_VC): Likewise.
(HWS_VD): Likewise.
(HWS_VE): Likewise.
(HWS_VV): Likewise.
(HWS_VM): Likewise.
(HWS2_VM): Likewise.
(sparc_opcode_archs): Initialize hwcaps and hwcaps2 fields of
existing entries.
Adds Rust symbol demangler. Rust mangles symbols using GNU_V3 style,
adding a hash and various special character subtitutions. This adds
a new rust style to cplus_demangle and adds 3 helper functions
rust_demangle, rust_demangle_sym and rust_is_mangled.
rust-demangle.c was written by David. Mark did the code formatting to
GNU style and integration into the gcc/libiberty build system and
testsuite.
include/ChangeLog:
2016-11-03 David Tolnay <dtolnay@gmail.com>
Mark Wielaard <mark@klomp.org>
* demangle.h (DMGL_RUST): New macro.
(DMGL_STYLE_MASK): Add DMGL_RUST.
(demangling_styles): Add dlang_rust.
(RUST_DEMANGLING_STYLE_STRING): New macro.
(RUST_DEMANGLING): New macro.
(rust_demangle): New prototype.
(rust_is_mangled): Likewise.
(rust_demangle_sym): Likewise.
libiberty/ChangeLog:
2016-11-03 David Tolnay <dtolnay@gmail.com>
Mark Wielaard <mark@klomp.org>
* Makefile.in (CFILES): Add rust-demangle.c.
(REQUIRED_OFILES): Add rust-demangle.o.
* cplus-dem.c (libiberty_demanglers): Add rust_demangling case.
(cplus_demangle): Handle RUST_DEMANGLING.
(rust_demangle): New function.
* rust-demangle.c: New file.
* testsuite/Makefile.in (really-check): Add check-rust-demangle.
(check-rust-demangle): New rule.
* testsuite/rust-demangle-expected: New file.
Add support for FCMLA and FCADD complex arithmetic SIMD instructions.
FCMLA has an indexed element variant where the index range has to be
treated specially because a complex number takes two elements and the
indexed vector size depends on the other operands.
These complex number SIMD instructions are part of ARMv8.3
https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions
include/
2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com>
* opcode/aarch64.h (enum aarch64_opnd): Add AARCH64_OPND_IMM_ROT1,
AARCH64_OPND_IMM_ROT2, AARCH64_OPND_IMM_ROT3.
(enum aarch64_op): Add OP_FCMLA_ELEM.
opcodes/
2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com>
* aarch64-tbl.h (QL_V3SAMEHSD_ROT, QL_ELEMENT_ROT): Define.
(aarch64_feature_simd_v8_3, SIMD_V8_3): Define.
(aarch64_opcode_table): Add fcmla and fcadd.
(AARCH64_OPERANDS): Add IMM_ROT{1,2,3}.
* aarch64-asm.h (aarch64_ins_imm_rotate): Declare.
* aarch64-asm.c (aarch64_ins_imm_rotate): Define.
* aarch64-dis.h (aarch64_ext_imm_rotate): Declare.
* aarch64-dis.c (aarch64_ext_imm_rotate): Define.
* aarch64-opc.h (enum aarch64_field_kind): Add FLD_rotate{1,2,3}.
* aarch64-opc.c (fields): Add FLD_rotate{1,2,3}.
(operand_general_constraint_met_p): Rotate and index range check.
(aarch64_print_operand): Handle rotate operand.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
gas/
2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com>
* config/tc-aarch64.c (parse_operands): Handle AARCH64_OPND_IMM_ROT*.
* testsuite/gas/aarch64/advsimd-armv8_3.d: New.
* testsuite/gas/aarch64/advsimd-armv8_3.s: New.
* testsuite/gas/aarch64/illegal-fcmla.s: New.
* testsuite/gas/aarch64/illegal-fcmla.l: New.
* testsuite/gas/aarch64/illegal-fcmla.d: New.
ARMv8.3 can be selected with -march=armv8.3-a command line option.
An overview of the ARMv8.3 architecture extension is at
https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions
gas/
2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com>
* config/tc-aarch64.c (aarch64_archs): Add "armv8.3-a".
* doc/c-aarch64.texi (-march): Likewise.
include/
2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com>
* opcode/aarch64.h (AARCH64_FEATURE_V8_3): Define.
(AARCH64_ARCH_V8_3): Define.
(AARCH64_ARCH_V8_1, AARCH64_ARCH_V8_2): Simplify.
The current handling for arc instructions longer than 32-bits is all
handled as a special case in both the assembler and disassembler.
The problem with this approach is that it leads to code duplication,
selecting a long instruction is exactly the same process as selecting a
short instruction, except over more bits, in both cases we select based
on bit comparison, and initial operand insertion and extraction.
This commit unifies both the long and short instruction worlds,
converting the core opcodes library from being largely 32-bit focused,
to being largely 64-bit focused.
The changes are, on the whole, not too much. There's obviously a lot of
type changes but otherwise the bulk of the code just works. Most of the
actual functional changes are to code that previously handled the longer
48 or 64 bit instructions. The insert/extract handlers for these have
now been brought into line with the short instruction insert/extract
handlers.
All of the special case handling code that was previously added has now
been removed again. Overall, this commit reduces the amount of code in
the arc assembler and disassembler.
gas/ChangeLog:
* config/tc-arc.c (struct arc_insn): Change type of insn field.
(md_number_to_chars_midend): Support 6- and 8-byte values.
(emit_insn0): Update debug output.
(find_opcode_match): Likewise.
(build_fake_opcode_hash_entry): Delete.
(find_special_case_long_opcode): Delete.
(find_special_case): Remove long format special case handling.
(insert_operand): Change instruction type and update debug print
format.
(assemble_insn): Change instruction type, update debug print
formats, and remove unneeded assert.
include/ChangeLog:
* opcode/arc.h (struct arc_opcode): Change type of opcode and mask
fields.
(struct arc_long_opcode): Delete.
(struct arc_operand): Change types for insert and extract
handlers.
opcodes/ChangeLog:
* arc-dis.c (struct arc_operand_iterator): Remove all fields
relating to long instruction processing, add new limm field.
(OPCODE): Rename to...
(OPCODE_32BIT_INSN): ...this.
(OPCODE_AC): Delete.
(skip_this_opcode): Handle different instruction lengths, update
macro name.
(special_flag_p): Update parameter type.
(find_format_from_table): Update for more instruction lengths.
(find_format_long_instructions): Delete.
(find_format): Update for more instruction lengths.
(arc_insn_length): Likewise.
(extract_operand_value): Update for more instruction lengths.
(operand_iterator_next): Remove code relating to long
instructions.
(arc_opcode_to_insn_type): New function.
(print_insn_arc):Update for more instructions lengths.
* arc-ext.c (extInstruction_t): Change argument type.
* arc-ext.h (extInstruction_t): Change argument type.
* arc-fxi.h: Change type unsigned to unsigned long long
extensively throughout.
* arc-nps400-tbl.h: Add long instructions taken from
arc_long_opcodes table in arc-opc.c.
* arc-opc.c: Update parameter types on insert/extract handlers.
(arc_long_opcodes): Delete.
(arc_num_long_opcodes): Delete.
(arc_opcode_len): Update for more instruction lengths.
In preparation to moving to a world where arc instructions can be 2, 4,
6, or 8 bytes long, make some macros 64-bit safe.
There should be no functional change after this commit.
include/ChangeLog:
* opcode/arc.h: Make macros 64-bit safe.
In preparation for moving to a world where arc instructions can be 2, 4,
6, or 8 bytes in length, replace the ARC_SHORT macro (which is either
true of false) with an arc_opcode_len function that returns a length in
bytes.
There should be no functional change after this commit.
gas/ChangeLog:
* config/tc-arc.c (assemble_insn): Replace use of ARC_SHORT with
arc_opcode_len.
include/ChangeLog:
* opcode/arc.h (arc_opcode_len): Declare.
(ARC_SHORT): Delete.
opcodes/ChangeLog:
* arc-dis.c (find_format_from_table): Replace use of ARC_SHORT
with arc_opcode_len.
(find_format_long_instructions): Likewise.
* arc-opc.c (arc_opcode_len): New function.
So that GDB and other projects that share the top level can use them.
Bootstrapped with all default languages + jit on x86-64 Fedora 23.
gcc/ChangeLog:
2016-10-14 Pedro Alves <palves@redhat.com>
* coretypes.h (OVERRIDE, FINAL): Delete, moved to
include/ansidecl.h.
include/ChangeLog:
2016-10-14 Pedro Alves <palves@redhat.com>
* ansidecl.h (GCC_FINAL): Delete.
(OVERRIDE, FINAL): New, moved from gcc/coretypes.h.
The ARC (short) instructions are using a special register number to
indicate is the instruction uses a long immediate (LIMM). In the case
of short instruction, this LIMM indicator depends on the ISA version
used. Thus, for ARCv1 processors, the LIMM indicator is 0x3E, the same
value used in "long" instructions. However, for the ARCv2 processors,
this LIMM indicator is 0x1E.
This patch fixes the LIMM detection for ARCv1 ISA and adds two tests.
gas/
2016-10-13 Claudiu Zissulescu <claziss@synopsys.com>
* testsuite/gas/arc/shortlimm_a7.d: New file.
* testsuite/gas/arc/shortlimm_a7.s: Likewise.
* testsuite/gas/arc/shortlimm_hs.d: Likewise.
* testsuite/gas/arc/shortlimm_hs.s: Likewise.
include/
2016-10-13 Claudiu Zissulescu <claziss@synopsys.com>
* opcode/arc.h (ARC_OPCODE_ARCV2): New define.
opcodes/
2016-10-13 Claudiu Zissulescu <claziss@synopsys.com>
* arc-dis.c (find_format_from_table): Discriminate LIMM indicator
usage on ISA basis.
cmp[l][o] get an optional L field only when generating 32-bit code.
dcbf, tlbie and tlbiel keep their optional L field, ditto for R field
of tbegin. cmprb, tsr., wlcr[all] and mtsle all change to a
compulsory L field.
L field of dcbf and wclr is 2 bits.
PR 20641
include/
* opcode/ppc.h (PPC_OPERAND_OPTIONAL32): Define.
opcodes/
* ppc-opc.c (L): Make compulsory.
(LOPT): New, optional form of L.
(HTM_R): Define as LOPT.
(L0, L1): Delete.
(L32OPT): New, optional for 32-bit L.
(L2OPT): New, 2-bit L for dcbf.
(SVC_LEC): Update.
(L2): Define.
(insert_l0, extract_l0, insert_l1, extract_l2): Delete.
(powerpc_opcodes <cmpli, cmpi, cmpl, cmp>): Use L32OPT.
<dcbf>: Use L2OPT.
<tlbiel, tlbie>: Use LOPT.
<wclr, wclrall>: Use L2.
gas/
* config/tc-ppc.c (md_assemble): Handle PPC_OPERAND_OPTIONAL32.
* testsuite/gas/ppc/power8.s: Provide tbegin. operand.
* testsuite/gas/ppc/power9.d: Update cmprb disassembly.
This patch extends Tag_GNU_Power_ABI_FP to cover long double ABIs,
makes the assembler warn about undefined tag values, and removes
similar warnings from the linker. I think it is better to not
warn in the linker about undefined tag values as future extensions to
the tags then won't result in likely bogus warnings. This is
consistent with the fact that an older linker won't warn on an
entirely new tag.
include/
* elf/ppc.h (Tag_GNU_Power_ABI_FP): Comment.
bfd/
* elf-bfd.h (_bfd_elf_ppc_merge_fp_attributes): Declare.
* elf32-ppc.c (_bfd_elf_ppc_merge_fp_attributes): New function.
(ppc_elf_merge_obj_attributes): Use it. Don't copy first file
attributes, merge them. Don't warn about undefined tag bits,
or copy unknown values to output.
* elf64-ppc.c (ppc64_elf_merge_private_bfd_data): Call
_bfd_elf_ppc_merge_fp_attributes.
binutils/
* readelf.c (display_power_gnu_attribute): Catch truncated section
for all powerpc attributes. Display long double ABI. Don't
capitalize words, except for names. Show known bits of tag values
when some unknown bits are present. Whitespace fixes.
gas/
* config/tc-ppc.c (ppc_elf_gnu_attribute): New function.
(md_pseudo_table <ELF>): Handle "gnu_attribute".
ld/
* testsuite/ld-powerpc/attr-gnu-4-4.s: Delete.
* testsuite/ld-powerpc/attr-gnu-4-14.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-24.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-34.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-41.d: Delete.
* testsuite/ld-powerpc/attr-gnu-4-32.d: Adjust expected warning.
* testsuite/ld-powerpc/attr-gnu-8-23.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-01.d: Adjust expected output.
* testsuite/ld-powerpc/attr-gnu-4-02.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-03.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-10.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-11.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-20.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-22.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-4-33.d: Likewise.
* testsuite/ld-powerpc/attr-gnu-8-11.d: Likewise.
* testsuite/ld-powerpc/powerpc.exp: Don't run deleted tests.
SVE defines new names for existing NZCV conditions, to reflect the
result of instructions like PTEST. This patch adds support for these
names.
The patch also adds comments to the disassembly output to show the
alternative names of a condition code. For example:
cinv x0, x1, cc
becomes:
cinv x0, x1, cc // cc = lo, ul, last
and:
b.cc f0 <...>
becomes:
b.cc f0 <...> // b.lo, b.ul, b.last
Doing this for the SVE names follows the practice recommended by the
SVE specification and is definitely useful when reading SVE code.
If the feeling is that it's too distracting elsewhere, we could add
an option to turn it off.
include/
* opcode/aarch64.h (aarch64_cond): Bump array size to 4.
opcodes/
* aarch64-dis.c (remove_dot_suffix): New function, split out from...
(print_mnemonic_name): ...here.
(print_comment): New function.
(print_aarch64_insn): Call it.
* aarch64-opc.c (aarch64_conds): Add SVE names.
(aarch64_print_operand): Print alternative condition names in
a comment.
gas/
* config/tc-aarch64.c (opcode_lookup): Search for the end of
a condition name, rather than assuming that it will have exactly
2 characters.
(parse_operands): Likewise.
* testsuite/gas/aarch64/alias.d: Add new condition-code comments
to the expected output.
* testsuite/gas/aarch64/beq_1.d: Likewise.
* testsuite/gas/aarch64/float-fp16.d: Likewise.
* testsuite/gas/aarch64/int-insns.d: Likewise.
* testsuite/gas/aarch64/no-aliases.d: Likewise.
* testsuite/gas/aarch64/programmer-friendly.d: Likewise.
* testsuite/gas/aarch64/reloc-insn.d: Likewise.
* testsuite/gas/aarch64/b_c_1.d, testsuite/gas/aarch64/b_c_1.s:
New test.
ld/
* testsuite/ld-aarch64/emit-relocs-280.d: Match branch comments.
* testsuite/ld-aarch64/weak-undefined.d: Likewise.
The main purpose of the SVE aarch64_insn_classes is to describe how
an index into an aarch64_opnd_qualifier_seq_t is represented in the
instruction encoding. Other instructions usually use flags for this
information, but (a) we're running out of those and (b) the iclass
would otherwise be unused for SVE.
include/
* opcode/aarch64.h (sve_cpy, sve_index, sve_limm, sve_misc)
(sve_movprfx, sve_pred_zm, sve_shift_pred, sve_shift_unpred)
(sve_size_bhs, sve_size_bhsd, sve_size_hsd, sve_size_sd): New
aarch64_insn_classes.
opcodes/
* aarch64-opc.h (FLD_SVE_M_4, FLD_SVE_M_14, FLD_SVE_M_16)
(FLD_SVE_sz, FLD_SVE_tsz, FLD_SVE_tszl_8, FLD_SVE_tszl_19): New
aarch64_field_kinds.
* aarch64-opc.c (fields): Add corresponding entries.
* aarch64-asm.c (aarch64_get_variant): New function.
(aarch64_encode_variant_using_iclass): Likewise.
(aarch64_opcode_encode): Call it.
* aarch64-dis.c (aarch64_decode_variant_using_iclass): New function.
(aarch64_opcode_decode): Call it.
SVE uses some new fields to store W, X and scalar FP registers.
This patch adds corresponding operands.
include/
* opcode/aarch64.h (AARCH64_OPND_SVE_Rm): New aarch64_opnd.
(AARCH64_OPND_SVE_Rn_SP, AARCH64_OPND_SVE_VZn, AARCH64_OPND_SVE_Vd)
(AARCH64_OPND_SVE_Vm, AARCH64_OPND_SVE_Vn): Likewise.
opcodes/
* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE core
and FP register operands.
* aarch64-opc.h (FLD_SVE_Rm, FLD_SVE_Rn, FLD_SVE_Vd, FLD_SVE_Vm)
(FLD_SVE_Vn): New aarch64_field_kinds.
* aarch64-opc.c (fields): Add corresponding entries.
(aarch64_print_operand): Handle the new SVE core and FP register
operands.
* aarch64-opc-2.c: Regenerate.
* aarch64-asm-2.c: Likewise.
* aarch64-dis-2.c: Likewise.
gas/
* config/tc-aarch64.c (parse_operands): Handle the new SVE core
and FP register operands.
This patch adds support for the new SVE floating-point immediate
operands. One operand uses the same 8-bit encoding as base AArch64,
but in a different position. The others use a single bit to select
between two values.
One of the single-bit operands is a choice between 0 and 1, where 0
is not a valid 8-bit encoding. I think the cleanest way of handling
these single-bit immediates is therefore to use the IEEE float encoding
itself as the immediate value and select between the two possible values
when encoding and decoding.
As described in the covering note for the patch that added F_STRICT,
we get better error messages by accepting unsuffixed vector registers
and leaving the qualifier matching code to report an error. This means
that we carry on parsing the other operands, and so can try to parse FP
immediates for invalid instructions like:
fcpy z0, #2.5
In this case there is no suffix to tell us whether the immediate should
be treated as single or double precision. Again, we get better error
messages by picking one (arbitrary) immediate size and reporting an error
for the missing suffix later.
include/
* opcode/aarch64.h (AARCH64_OPND_SVE_FPIMM8): New aarch64_opnd.
(AARCH64_OPND_SVE_I1_HALF_ONE, AARCH64_OPND_SVE_I1_HALF_TWO)
(AARCH64_OPND_SVE_I1_ZERO_ONE): Likewise.
opcodes/
* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE FP
immediate operands.
* aarch64-opc.h (FLD_SVE_i1): New aarch64_field_kind.
* aarch64-opc.c (fields): Add corresponding entry.
(operand_general_constraint_met_p): Handle the new SVE FP immediate
operands.
(aarch64_print_operand): Likewise.
* aarch64-opc-2.c: Regenerate.
* aarch64-asm.h (ins_sve_float_half_one, ins_sve_float_half_two)
(ins_sve_float_zero_one): New inserters.
* aarch64-asm.c (aarch64_ins_sve_float_half_one): New function.
(aarch64_ins_sve_float_half_two): Likewise.
(aarch64_ins_sve_float_zero_one): Likewise.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis.h (ext_sve_float_half_one, ext_sve_float_half_two)
(ext_sve_float_zero_one): New extractors.
* aarch64-dis.c (aarch64_ext_sve_float_half_one): New function.
(aarch64_ext_sve_float_half_two): Likewise.
(aarch64_ext_sve_float_zero_one): Likewise.
* aarch64-dis-2.c: Regenerate.
gas/
* config/tc-aarch64.c (double_precision_operand_p): New function.
(parse_operands): Use it to calculate the dp_p input to
parse_aarch64_imm_float. Handle the new SVE FP immediate operands.
This patch adds the new SVE integer immediate operands. There are
three kinds:
- simple signed and unsigned ranges, but with new widths and positions.
- 13-bit logical immediates. These have the same form as in base AArch64,
but at a different bit position.
In the case of the "MOV Zn.<T>, #<limm>" alias of DUPM, the logical
immediate <limm> is not allowed to be a valid DUP immediate, since DUP
is preferred over DUPM for constants that both instructions can handle.
- a new 9-bit arithmetic immediate, of the form "<imm8>{, LSL #8}".
In some contexts the operand is signed and in others it's unsigned.
As an extension, we allow shifted immediates to be written as a single
integer, e.g. "#256" is equivalent to "#1, LSL #8". We also use the
shiftless form as the preferred disassembly, except for the special
case of "#0, LSL #8" (a redundant encoding of 0).
include/
* opcode/aarch64.h (AARCH64_OPND_SIMM5): New aarch64_opnd.
(AARCH64_OPND_SVE_AIMM, AARCH64_OPND_SVE_ASIMM)
(AARCH64_OPND_SVE_INV_LIMM, AARCH64_OPND_SVE_LIMM)
(AARCH64_OPND_SVE_LIMM_MOV, AARCH64_OPND_SVE_SHLIMM_PRED)
(AARCH64_OPND_SVE_SHLIMM_UNPRED, AARCH64_OPND_SVE_SHRIMM_PRED)
(AARCH64_OPND_SVE_SHRIMM_UNPRED, AARCH64_OPND_SVE_SIMM5)
(AARCH64_OPND_SVE_SIMM5B, AARCH64_OPND_SVE_SIMM6)
(AARCH64_OPND_SVE_SIMM8, AARCH64_OPND_SVE_UIMM3)
(AARCH64_OPND_SVE_UIMM7, AARCH64_OPND_SVE_UIMM8)
(AARCH64_OPND_SVE_UIMM8_53): Likewise.
(aarch64_sve_dupm_mov_immediate_p): Declare.
opcodes/
* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE
integer immediate operands.
* aarch64-opc.h (FLD_SVE_immN, FLD_SVE_imm3, FLD_SVE_imm5)
(FLD_SVE_imm5b, FLD_SVE_imm7, FLD_SVE_imm8, FLD_SVE_imm9)
(FLD_SVE_immr, FLD_SVE_imms, FLD_SVE_tszh): New aarch64_field_kinds.
* aarch64-opc.c (fields): Add corresponding entries.
(operand_general_constraint_met_p): Handle the new SVE integer
immediate operands.
(aarch64_print_operand): Likewise.
(aarch64_sve_dupm_mov_immediate_p): New function.
* aarch64-opc-2.c: Regenerate.
* aarch64-asm.h (ins_inv_limm, ins_sve_aimm, ins_sve_asimm)
(ins_sve_limm_mov, ins_sve_shlimm, ins_sve_shrimm): New inserters.
* aarch64-asm.c (aarch64_ins_limm_1): New function, split out from...
(aarch64_ins_limm): ...here.
(aarch64_ins_inv_limm): New function.
(aarch64_ins_sve_aimm): Likewise.
(aarch64_ins_sve_asimm): Likewise.
(aarch64_ins_sve_limm_mov): Likewise.
(aarch64_ins_sve_shlimm): Likewise.
(aarch64_ins_sve_shrimm): Likewise.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis.h (ext_inv_limm, ext_sve_aimm, ext_sve_asimm)
(ext_sve_limm_mov, ext_sve_shlimm, ext_sve_shrimm): New extractors.
* aarch64-dis.c (decode_limm): New function, split out from...
(aarch64_ext_limm): ...here.
(aarch64_ext_inv_limm): New function.
(decode_sve_aimm): Likewise.
(aarch64_ext_sve_aimm): Likewise.
(aarch64_ext_sve_asimm): Likewise.
(aarch64_ext_sve_limm_mov): Likewise.
(aarch64_top_bit): Likewise.
(aarch64_ext_sve_shlimm): Likewise.
(aarch64_ext_sve_shrimm): Likewise.
* aarch64-dis-2.c: Regenerate.
gas/
* config/tc-aarch64.c (parse_operands): Handle the new SVE integer
immediate operands.
This patch adds support for addresses of the form:
[<base>, #<offset>, MUL VL]
This involves adding a new AARCH64_MOD_MUL_VL modifier, which is
why I split it out from the other addressing modes.
For LD2, LD3 and LD4, the offset must be a multiple of the structure
size, so for LD3 the possible values are 0, 3, 6, .... The patch
therefore extends value_aligned_p to handle non-power-of-2 alignments.
include/
* opcode/aarch64.h (AARCH64_OPND_SVE_ADDR_RI_S4xVL): New aarch64_opnd.
(AARCH64_OPND_SVE_ADDR_RI_S4x2xVL, AARCH64_OPND_SVE_ADDR_RI_S4x3xVL)
(AARCH64_OPND_SVE_ADDR_RI_S4x4xVL, AARCH64_OPND_SVE_ADDR_RI_S6xVL)
(AARCH64_OPND_SVE_ADDR_RI_S9xVL): Likewise.
(AARCH64_MOD_MUL_VL): New aarch64_modifier_kind.
opcodes/
* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for new MUL VL
operands.
* aarch64-opc.c (aarch64_operand_modifiers): Initialize
the AARCH64_MOD_MUL_VL entry.
(value_aligned_p): Cope with non-power-of-two alignments.
(operand_general_constraint_met_p): Handle the new MUL VL addresses.
(print_immediate_offset_address): Likewise.
(aarch64_print_operand): Likewise.
* aarch64-opc-2.c: Regenerate.
* aarch64-asm.h (ins_sve_addr_ri_s4xvl, ins_sve_addr_ri_s6xvl)
(ins_sve_addr_ri_s9xvl): New inserters.
* aarch64-asm.c (aarch64_ins_sve_addr_ri_s4xvl): New function.
(aarch64_ins_sve_addr_ri_s6xvl): Likewise.
(aarch64_ins_sve_addr_ri_s9xvl): Likewise.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis.h (ext_sve_addr_ri_s4xvl, ext_sve_addr_ri_s6xvl)
(ext_sve_addr_ri_s9xvl): New extractors.
* aarch64-dis.c (aarch64_ext_sve_addr_reg_mul_vl): New function.
(aarch64_ext_sve_addr_ri_s4xvl): Likewise.
(aarch64_ext_sve_addr_ri_s6xvl): Likewise.
(aarch64_ext_sve_addr_ri_s9xvl): Likewise.
* aarch64-dis-2.c: Regenerate.
gas/
* config/tc-aarch64.c (SHIFTED_NONE, SHIFTED_MUL_VL): New
parse_shift_modes.
(parse_shift): Handle SHIFTED_MUL_VL.
(parse_address_main): Add an imm_shift_mode parameter.
(parse_address, parse_sve_address): Update accordingly.
(parse_operands): Handle MUL VL addressing modes.
This patch adds most of the new SVE addressing modes and associated
operands. A follow-on patch adds MUL VL, since handling it separately
makes the changes easier to read.
The patch also introduces a new "operand-dependent data" field to the
operand flags, based closely on the existing one for opcode flags.
For SVE this new field needs only 2 bits, but it could be widened
in future if necessary.
include/
* opcode/aarch64.h (AARCH64_OPND_SVE_ADDR_RI_U6): New aarch64_opnd.
(AARCH64_OPND_SVE_ADDR_RI_U6x2, AARCH64_OPND_SVE_ADDR_RI_U6x4)
(AARCH64_OPND_SVE_ADDR_RI_U6x8, AARCH64_OPND_SVE_ADDR_RR)
(AARCH64_OPND_SVE_ADDR_RR_LSL1, AARCH64_OPND_SVE_ADDR_RR_LSL2)
(AARCH64_OPND_SVE_ADDR_RR_LSL3, AARCH64_OPND_SVE_ADDR_RX)
(AARCH64_OPND_SVE_ADDR_RX_LSL1, AARCH64_OPND_SVE_ADDR_RX_LSL2)
(AARCH64_OPND_SVE_ADDR_RX_LSL3, AARCH64_OPND_SVE_ADDR_RZ)
(AARCH64_OPND_SVE_ADDR_RZ_LSL1, AARCH64_OPND_SVE_ADDR_RZ_LSL2)
(AARCH64_OPND_SVE_ADDR_RZ_LSL3, AARCH64_OPND_SVE_ADDR_RZ_XTW_14)
(AARCH64_OPND_SVE_ADDR_RZ_XTW_22, AARCH64_OPND_SVE_ADDR_RZ_XTW1_14)
(AARCH64_OPND_SVE_ADDR_RZ_XTW1_22, AARCH64_OPND_SVE_ADDR_RZ_XTW2_14)
(AARCH64_OPND_SVE_ADDR_RZ_XTW2_22, AARCH64_OPND_SVE_ADDR_RZ_XTW3_14)
(AARCH64_OPND_SVE_ADDR_RZ_XTW3_22, AARCH64_OPND_SVE_ADDR_ZI_U5)
(AARCH64_OPND_SVE_ADDR_ZI_U5x2, AARCH64_OPND_SVE_ADDR_ZI_U5x4)
(AARCH64_OPND_SVE_ADDR_ZI_U5x8, AARCH64_OPND_SVE_ADDR_ZZ_LSL)
(AARCH64_OPND_SVE_ADDR_ZZ_SXTW, AARCH64_OPND_SVE_ADDR_ZZ_UXTW):
Likewise.
opcodes/
* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE
address operands.
* aarch64-opc.h (FLD_SVE_imm6, FLD_SVE_msz, FLD_SVE_xs_14)
(FLD_SVE_xs_22): New aarch64_field_kinds.
(OPD_F_OD_MASK, OPD_F_OD_LSB, OPD_F_NO_ZR): New flags.
(get_operand_specific_data): New function.
* aarch64-opc.c (fields): Add entries for FLD_SVE_imm6, FLD_SVE_msz,
FLD_SVE_xs_14 and FLD_SVE_xs_22.
(operand_general_constraint_met_p): Handle the new SVE address
operands.
(sve_reg): New array.
(get_addr_sve_reg_name): New function.
(aarch64_print_operand): Handle the new SVE address operands.
* aarch64-opc-2.c: Regenerate.
* aarch64-asm.h (ins_sve_addr_ri_u6, ins_sve_addr_rr_lsl)
(ins_sve_addr_rz_xtw, ins_sve_addr_zi_u5, ins_sve_addr_zz_lsl)
(ins_sve_addr_zz_sxtw, ins_sve_addr_zz_uxtw): New inserters.
* aarch64-asm.c (aarch64_ins_sve_addr_ri_u6): New function.
(aarch64_ins_sve_addr_rr_lsl): Likewise.
(aarch64_ins_sve_addr_rz_xtw): Likewise.
(aarch64_ins_sve_addr_zi_u5): Likewise.
(aarch64_ins_sve_addr_zz): Likewise.
(aarch64_ins_sve_addr_zz_lsl): Likewise.
(aarch64_ins_sve_addr_zz_sxtw): Likewise.
(aarch64_ins_sve_addr_zz_uxtw): Likewise.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis.h (ext_sve_addr_ri_u6, ext_sve_addr_rr_lsl)
(ext_sve_addr_rz_xtw, ext_sve_addr_zi_u5, ext_sve_addr_zz_lsl)
(ext_sve_addr_zz_sxtw, ext_sve_addr_zz_uxtw): New extractors.
* aarch64-dis.c (aarch64_ext_sve_add_reg_imm): New function.
(aarch64_ext_sve_addr_ri_u6): Likewise.
(aarch64_ext_sve_addr_rr_lsl): Likewise.
(aarch64_ext_sve_addr_rz_xtw): Likewise.
(aarch64_ext_sve_addr_zi_u5): Likewise.
(aarch64_ext_sve_addr_zz): Likewise.
(aarch64_ext_sve_addr_zz_lsl): Likewise.
(aarch64_ext_sve_addr_zz_sxtw): Likewise.
(aarch64_ext_sve_addr_zz_uxtw): Likewise.
* aarch64-dis-2.c: Regenerate.
gas/
* config/tc-aarch64.c (REG_TYPE_SVE_BASE, REG_TYPE_SVE_OFFSET): New
register types.
(get_reg_expected_msg): Handle them.
(aarch64_addr_reg_parse): New function, split out from
aarch64_reg_parse_32_64. Handle Z registers too.
(aarch64_reg_parse_32_64): Call it.
(parse_address_main): Add base_qualifier, offset_qualifier,
base_type and offset_type parameters. Handle SVE base and offset
registers.
(parse_address): Update call to parse_address_main.
(parse_sve_address): New function.
(parse_operands): Parse the new SVE address operands.
Some SVE instructions count the number of elements in a given vector
pattern and allow a scale factor of [1, 16] to be applied to the result.
This scale factor is written ", MUL #n", where "MUL" is a new operator.
E.g.:
UQINCD X0, POW2, MUL #2
This patch adds support for this kind of operand.
All existing operators were shifts of some kind, so there was a natural
range of [0, 63] regardless of context. This was then narrowered further
by later checks (e.g. to [0, 31] when used for 32-bit values).
In contrast, MUL doesn't really have a natural context-independent range.
Rather than pick one arbitrarily, it seemed better to make the "shift"
amount a full 64-bit value and leave the range test to the usual
operand-checking code. I've rearranged the fields of aarch64_opnd_info
so that this doesn't increase the size of the structure (although I don't
think its size is critical anyway).
include/
* opcode/aarch64.h (AARCH64_OPND_SVE_PATTERN_SCALED): New
aarch64_opnd.
(AARCH64_MOD_MUL): New aarch64_modifier_kind.
(aarch64_opnd_info): Make shifter.amount an int64_t and
rearrange the fields.
opcodes/
* aarch64-tbl.h (AARCH64_OPERANDS): Add an entry for
AARCH64_OPND_SVE_PATTERN_SCALED.
* aarch64-opc.h (FLD_SVE_imm4): New aarch64_field_kind.
* aarch64-opc.c (fields): Add a corresponding entry.
(set_multiplier_out_of_range_error): New function.
(aarch64_operand_modifiers): Add entry for AARCH64_MOD_MUL.
(operand_general_constraint_met_p): Handle
AARCH64_OPND_SVE_PATTERN_SCALED.
(print_register_offset_address): Use PRIi64 to print the
shift amount.
(aarch64_print_operand): Likewise. Handle
AARCH64_OPND_SVE_PATTERN_SCALED.
* aarch64-opc-2.c: Regenerate.
* aarch64-asm.h (ins_sve_scale): New inserter.
* aarch64-asm.c (aarch64_ins_sve_scale): New function.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis.h (ext_sve_scale): New inserter.
* aarch64-dis.c (aarch64_ext_sve_scale): New function.
* aarch64-dis-2.c: Regenerate.
gas/
* config/tc-aarch64.c (SHIFTED_MUL): New parse_shift_mode.
(parse_shift): Handle it. Reject AARCH64_MOD_MUL for all other
shift modes. Skip range tests for AARCH64_MOD_MUL.
(process_omitted_operand): Handle AARCH64_OPND_SVE_PATTERN_SCALED.
(parse_operands): Likewise.
The SVE instructions have two enumerated operands: one to select a
vector pattern and another to select a prefetch operation. The latter
is a cut-down version of the base AArch64 prefetch operation.
Both types of operand can also be specified as raw enum values such as #31.
Reserved values can only be specified this way.
If it hadn't been for the pattern operand, I would have been tempted
to use the existing parsing for prefetch operations and add extra
checks for SVE. However, since the patterns needed new enum parsing
code anyway, it seeemed cleaner to reuse it for the prefetches too.
Because of the small number of enum values, I don't think we'd gain
anything by using hash tables.
include/
* opcode/aarch64.h (AARCH64_OPND_SVE_PATTERN): New aarch64_opnd.
(AARCH64_OPND_SVE_PRFOP): Likewise.
(aarch64_sve_pattern_array): Declare.
(aarch64_sve_prfop_array): Likewise.
opcodes/
* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for
AARCH64_OPND_SVE_PATTERN and AARCH64_OPND_SVE_PRFOP.
* aarch64-opc.h (FLD_SVE_pattern): New aarch64_field_kind.
(FLD_SVE_prfop): Likewise.
* aarch64-opc.c: Include libiberty.h.
(aarch64_sve_pattern_array): New variable.
(aarch64_sve_prfop_array): Likewise.
(fields): Add entries for FLD_SVE_pattern and FLD_SVE_prfop.
(aarch64_print_operand): Handle AARCH64_OPND_SVE_PATTERN and
AARCH64_OPND_SVE_PRFOP.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
gas/
* config/tc-aarch64.c (parse_enum_string): New function.
(po_enum_or_fail): New macro.
(parse_operands): Handle AARCH64_OPND_SVE_PATTERN and
AARCH64_OPND_SVE_PRFOP.
This patch adds qualifiers to represent /z and /m suffixes on
predicate registers.
include/
* opcode/aarch64.h (AARCH64_OPND_QLF_P_Z): New aarch64_opnd_qualifier.
(AARCH64_OPND_QLF_P_M): Likewise.
opcodes/
* aarch64-opc.c (aarch64_opnd_qualifiers): Add entries for
AARCH64_OPND_QLF_P_[ZM].
(aarch64_print_operand): Print /z and /m where appropriate.
gas/
* config/tc-aarch64.c (vector_el_type): Add NT_zero and NT_merge.
(parse_vector_type_for_operand): Assert that the skipped character
is a '.'.
(parse_predication_for_operand): New function.
(parse_typed_reg): Parse /z and /m suffixes for predicate registers.
(vectype_to_qualifier): Handle NT_zero and NT_merge.
This patch adds the Zn and Pn registers, and associated fields and
operands.
include/
* opcode/aarch64.h (AARCH64_OPND_CLASS_SVE_REG): New
aarch64_operand_class.
(AARCH64_OPND_CLASS_PRED_REG): Likewise.
(AARCH64_OPND_SVE_Pd, AARCH64_OPND_SVE_Pg3, AARCH64_OPND_SVE_Pg4_5)
(AARCH64_OPND_SVE_Pg4_10, AARCH64_OPND_SVE_Pg4_16)
(AARCH64_OPND_SVE_Pm, AARCH64_OPND_SVE_Pn, AARCH64_OPND_SVE_Pt)
(AARCH64_OPND_SVE_Za_5, AARCH64_OPND_SVE_Za_16, AARCH64_OPND_SVE_Zd)
(AARCH64_OPND_SVE_Zm_5, AARCH64_OPND_SVE_Zm_16, AARCH64_OPND_SVE_Zn)
(AARCH64_OPND_SVE_Zn_INDEX, AARCH64_OPND_SVE_ZnxN)
(AARCH64_OPND_SVE_Zt, AARCH64_OPND_SVE_ZtxN): New aarch64_opnds.
opcodes/
* aarch64-tbl.h (AARCH64_OPERANDS): Add entries for new SVE operands.
* aarch64-opc.h (FLD_SVE_Pd, FLD_SVE_Pg3, FLD_SVE_Pg4_5)
(FLD_SVE_Pg4_10, FLD_SVE_Pg4_16, FLD_SVE_Pm, FLD_SVE_Pn, FLD_SVE_Pt)
(FLD_SVE_Za_5, FLD_SVE_Za_16, FLD_SVE_Zd, FLD_SVE_Zm_5, FLD_SVE_Zm_16)
(FLD_SVE_Zn, FLD_SVE_Zt, FLD_SVE_tzsh): New aarch64_field_kinds.
* aarch64-opc.c (fields): Add corresponding entries here.
(operand_general_constraint_met_p): Check that SVE register lists
have the correct length. Check the ranges of SVE index registers.
Check for cases where p8-p15 are used in 3-bit predicate fields.
(aarch64_print_operand): Handle the new SVE operands.
* aarch64-opc-2.c: Regenerate.
* aarch64-asm.h (ins_sve_index, ins_sve_reglist): New inserters.
* aarch64-asm.c (aarch64_ins_sve_index): New function.
(aarch64_ins_sve_reglist): Likewise.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis.h (ext_sve_index, ext_sve_reglist): New extractors.
* aarch64-dis.c (aarch64_ext_sve_index): New function.
(aarch64_ext_sve_reglist): Likewise.
* aarch64-dis-2.c: Regenerate.
gas/
* config/tc-aarch64.c (NTA_HASVARWIDTH): New macro.
(AARCH64_REG_TYPES): Add ZN and PN.
(get_reg_expected_msg): Handle them.
(parse_vector_type_for_operand): Add a reg_type parameter.
Skip the width for Zn and Pn registers.
(parse_typed_reg): Extend vector handling to Zn and Pn. Update the
call to parse_vector_type_for_operand. Set HASVARTYPE for Zn and Pn,
expecting the width to be 0.
(parse_vector_reg_list): Restrict error about [BHSD]nn operands to
REG_TYPE_VN.
(vectype_to_qualifier): Use S_[BHSD] qualifiers for NTA_HASVARWIDTH.
(parse_operands): Handle the new Zn and Pn operands.
(REGSET16): New macro, split out from...
(REGSET31): ...here.
(reg_names): Add Zn and Pn entries.
SVE has some instructions in which the same register appears twice
in the assembly string, once as an input and once as an output.
This patch adds a general mechanism for that.
The patch needs to add new information to the instruction entries.
One option would have been to extend the flags field of the opcode
to 64 bits (since we already rely on 64-bit integers being available
on the host). However, the *_INSN macros mean that it's easy to add
new information as top-level fields without affecting the existing
table entries too much. Going for that option seemed to give slightly
neater code.
include/
* opcode/aarch64.h (aarch64_opcode): Add a tied_operand field.
(AARCH64_OPDE_UNTIED_OPERAND): New aarch64_operand_error_kind.
opcodes/
* aarch64-tbl.h (CORE_INSN, __FP_INSN, SIMD_INSN, CRYP_INSN)
(_CRC_INSN, _LSE_INSN, _LOR_INSN, RDMA_INSN, FP16_INSN, SF16_INSN)
(V8_2_INSN, aarch64_opcode_table): Initialize tied_operand field.
* aarch64-opc.c (aarch64_match_operands_constraint): Check for
tied operands.
gas/
* config/tc-aarch64.c (output_operand_error_record): Handle
AARCH64_OPDE_UNTIED_OPERAND.
SVE predicate operands can appear in three forms:
1. unsuffixed: "Pn"
2. with a predication type: "Pn/[ZM]"
3. with a size suffix: "Pn.[BHSD]"
No variation is allowed: unsuffixed operands cannot have a (redundant)
suffix, and the suffixes can never be dropped. Unsuffixed Pn are used
in LDR and STR, but they are also used for Pg operands in cases where
the result is scalar and where there is therefore no choice to be made
between "merging" and "zeroing". This means that some Pg operands have
suffixes and others don't.
It would be possible to use context-sensitive parsing to handle
this difference. The tc-aarch64.c code would then raise an error
if the wrong kind of suffix is used for a particular instruction.
However, we get much more user-friendly error messages if we parse
all three forms for all SVE instructions and record the suffix as a
qualifier. The normal qualifier matching code can then report cases
where the wrong kind of suffix is used. This is a slight extension
of existing usage, which really only checks for the wrong choice of
suffix within a particular kind of suffix.
The only catch is a that a "NIL" entry in the qualifier list
specifically means "no suffix should be present" (case 1 above).
NIL isn't a wildcard here. It also means that an instruction that
requires all-NIL qualifiers can fail to match (because a suffix was
supplied when it shouldn't have been); this requires a slight change
to find_best_match.
This patch adds an F_STRICT flag to select this behaviour.
The flag will be set for all SVE instructions. The behaviour
for other instructions doesn't change.
include/
* opcode/aarch64.h (F_STRICT): New flag.
opcodes/
* aarch64-opc.c (match_operands_qualifier): Handle F_STRICT.
gas/
* config/tc-aarch64.c (find_best_match): Simplify, allowing an
instruction with all-NIL qualifiers to fail to match.
2016-09-07 Richard Earnshaw <rearnsha@arm.com>
* opcode/arm.h (ARM_ARCH_V8A_CRC): New architecture.
2016-09-07 Richard Earnshaw <rearnsha@arm.com>
* config/tc-arm.c ((arm_cpus): Use ARM_ARCH_V8A_CRC for all
ARMv8-A CPUs except xgene1.
Added support for ARC_SDA_12 reloc.
Fixed ARC_N32_ME.
Added ME (middle-endian) to ARC_SDA_12 reloc.
bfd/ChangeLog:
Cupertino Miranda <cmiranda@synopsys.com>
* reloc.c: Fixed type in ARC_SECTOFF relocations. Added ARC_SDA_12
relocation.
* bfd-in2.h: Regenerated from the previous changes.
* libbfd.h: Regenerated from the previous changes.
include/ChangeLog:
Cupertino Miranda <cmiranda@synopsys.com>
* elf/arc-reloc.def: Fixed relocation formula for N*, SDA, SDA_12,
SDA_16_LD*, S13_PCREL, N32_ME, SECTOFF_* relocations.
* opcode/arc-func.h (replace_disp12s): Added. Used for SDA_12 relocation.
bfd/
* elf32-arm.c (CMSE_PREFIX): Define macro.
(elf32_arm_stub_cmse_branch_thumb_only): Define stub sequence.
(cmse_branch_thumb_only): Declare stub.
(struct elf32_arm_link_hash_table): Define cmse_stub_sec field.
(elf32_arm_get_plt_info): Add globals parameter. Use it to return
FALSE if there is no PLT.
(arm_type_of_stub): Adapt to new elf32_arm_get_plt_info signature.
(elf32_arm_final_link_relocate): Likewise.
(elf32_arm_gc_sweep_hook): Likewise.
(elf32_arm_gc_mark_extra_sections): Mark sections holding ARMv8-M
secure entry functions.
(arm_stub_is_thumb): Add case for arm_stub_cmse_branch_thumb_only.
(arm_dedicated_stub_output_section_required): Change to a switch case
and add a case for arm_stub_cmse_branch_thumb_only.
(arm_dedicated_stub_output_section_required_alignment): Likewise.
(arm_stub_dedicated_output_section_name): Likewise.
(arm_stub_dedicated_input_section_ptr): Likewise and remove
ATTRIBUTE_UNUSED for htab parameter.
(arm_stub_required_alignment): Likewise.
(arm_stub_sym_claimed): Likewise.
(arm_dedicated_stub_section_padding): Likewise.
(cmse_scan): New function.
(elf32_arm_size_stubs): Call cmse_scan for ARM M profile targets.
Set stub_changed to TRUE if such veneers were created.
(elf32_arm_swap_symbol_in): Add detection code for CMSE special
symbols.
include/
* arm.h (ARM_GET_SYM_CMSE_SPCL): Define macro.
(ARM_SET_SYM_CMSE_SPCL): Likewise.
ld/
* ld.texinfo (Placement of SG veneers): New concept entry.
* testsuite/ld-arm/arm-elf.exp
(Secure gateway veneers: no .gnu.sgstubs section): New test.
(Secure gateway veneers: wrong entry functions): Likewise.
(Secure gateway veneers (ARMv8-M Baseline)): Likewise.
(Secure gateway veneers (ARMv8-M Mainline)): Likewise.
* testsuite/ld-arm/cmse-veneers.s: New file.
* testsuite/ld-arm/cmse-veneers.d: Likewise.
* testsuite/ld-arm/cmse-veneers.rd: Likewise.
* testsuite/ld-arm/cmse-veneers.sd: Likewise.
* testsuite/ld-arm/cmse-veneers-no-gnu_sgstubs.out: Likewise.
* testsuite/ld-arm/cmse-veneers-wrong-entryfct.out: Likewise.
include * libiberty.h (MAX_ALLOCA_SIZE): New macro.
libiberty * make-relative-prefix.c (make_relative_prefix_1): Fall back to
malloc if alloca argument is greater than MAX_ALLOCA_SIZE.
* cp-demangle.c (cplus_demangle_operators): Add f[lrLR].
(d_expression_1): Handle them.
(d_maybe_print_fold_expression): New.
(d_print_comp_inner): Use it.
(d_index_template_argument): Handle negative index.
* cp-demangle.c (cplus_demangle_operators): Add sP and sZ.
(d_print_comp_inner): Handle them.
(d_template_args_1): Split out from d_template_args.
(d_args_length): New.
PR c++/70926
* cplus-dem.c: Handle large values and overflow when demangling
length variables.
(demangle_template_value_parm): Read only until end of mangled string.
(do_hpacc_template_literal): Likewise.
(do_type): Handle overflow when demangling array indices.
* cp-demangle.c (cplus_demangle_print_callback): Avoid zero-length
VLAs.
PR c++/70498
* cp-demangle.c (d_expression_1): Formatting fix.
* cplus-dem.c (enum type_kind_t): Add tk_rvalue_reference
constant.
(demangle_template_value_parm): Handle tk_rvalue_reference
type kind.
(do_type): Support 'O' type id (rvalue references).
* testsuite/demangle-expected: Add tests.
PR c++/70498
* cp-demangle.c: Parse numbers as integer instead of long to avoid
overflow after sanity checks. Include <limits.h> if available.
(INT_MAX): Define if necessary.
(d_make_template_param): Takes integer argument instead of long.
(d_make_function_param): Likewise.
(d_append_num): Likewise.
(d_identifier): Likewise.
(d_number): Parse as and return integer.
(d_compact_number): Handle overflow.
(d_source_name): Change variable type to integer for parsed number.
(d_java_resource): Likewise.
(d_special_name): Likewise.
(d_discriminator): Likewise.
(d_unnamed_type): Likewise.
* testsuite/demangle-expected: Add regression test cases.
* configure: Remove SH5 support.
PR c++/69687
* cplus-dem.c: Include <limits.h> if available.
(INT_MAX): Define if necessary.
(remember_type, remember_Ktype, register_Btype, string_need):
Abort if we detect cases where we the size of the allocation would
overflow.
PR c++/70492
* cplus-dem.c (gnu_special): Handle case where consume_count returns
-1.
PR c++/67394
PR c++/70481
* cplus-dem.c (squangle_mop_up): Zero bsize/ksize after freeing
btypevec/ktypevec.
* testsuite/demangle-expected: Add coverage tests.
opcodes * arc-nps400-tbl.h: Change block comments to GNU format.
* arc-dis.c: Add new globals addrtypenames,
addrtypenames_max, and addtypeunknown.
(get_addrtype): New function.
(print_insn_arc): Print colons and address types when
required.
* arc-opc.c: Add MAKE_INSERT_NPS_ADDRTYPE macro and use to
define insert and extract functions for all address types.
(arc_operands): Add operands for colon and all address
types.
* arc-nps-400-tbl.h: Add NPS-400 BMU instructions to opcode table.
* arc-opc.c: Add NPS_BD_TYPE and NPS_BMU_NUM operands,
insert_nps_bd_num_buff and extract_nps_bd_num_buff functions.
* arc-nps-400-tbl.h: Add NPS-400 PMU instructions to opcode table.
* arc-opc.c: Add NPS_PMU_NXT_DST and NPS_PMU_NUM_JOB operands,
insert_nps_pmu_num_job and extract_nps_pmu_num_job functions.
include * opcode/arc.h: Add ARC_OPERAND_ADDRTYPE,
ARC_OPERAND_COLON. Add the arc_nps_address_type enum and
ARC_NUM_ADDRTYPES.
* opcode/arc.h: Add BMU to insn_class_t enum.
* opcode/arc.h: Add PMU to insn_class_t enum.
gas * config/tc-arc.c: Add new global arc_addrtype_hash.
Define O_colon and O_addrtype.
(debug_exp): Add O_colon and O_addrtype.
(tokenize_arguments): Handle colon and address type
tokens.
(declare_addrtype): New function.
(md_begin): Initialise arc_addrtype_hash.
(arc_parse_name): Add lookup of address types.
(assemble_insn): Handle colons and address types by
ignoring them.
* testsuite/gas/arc/nps400-8.s: New file.
* testsuite/gas/arc/nps400-8.d: New file.
* testsuite/gas/arc/nps400-8.s: Add PMU instruction tests.
* testsuite/gas/arc/nps400-8.d: Add expected PMU
instruction output.
The R_ARC_SDA32 is wrongly described as a ME relocation, fix it. Offset the
__SDATA_BEGIN__ to take advantage of the signed 9-bit field of the
load/store instructions.
include/
2016-07-08 Claudiu Zissulescu <claziss@synopsys.com>
* elf/arc-reloc.def (ARC_SDA32): Don't use ME transformation.
ld/
2016-07-08 Claudiu Zissulescu <claziss@synopsys.com>
* emulparams/arcelf.sh (SDATA_START_SYMBOLS): Add offset.
* testsuite/ld-arc/sda-relocs.dd: New file.
* testsuite/ld-arc/sda-relocs.ld: Likewise.
* testsuite/ld-arc/sda-relocs.rd: Likewise.
* testsuite/ld-arc/sda-relocs.s: Likewise.
* testsuite/ld-arc/arc.exp: Add SDA tests.
Feature flag handling was not perfect, +nofp16 disabled fp
instructions too.
New feature flag macros were added to check features with multiple
bits set (matters for FP_F16 and SIMD_F16 opcode feature tests).
The unused AARCH64_OPCODE_HAS_FEATURE was removed, all checks should
use one of the AARCH64_CPU_HAS_* macros. AARCH64_CPU_HAS_FEATURE
now checks all feature bits.
The aarch64_features table now contains the dependencies as
a separate field (so when the feature is enabled all dependencies
are enabled and when it is disabled everything that depends on it
is disabled).
Note that armv8-a+foo+nofoo is not equivalent to armv8-a if
+foo turns on dependent features that nofoo does not turn off.
gas/
* config/tc-aarch64.c (struct aarch64_option_cpu_value_table): Add
require field.
(aarch64_features): Initialize require fields.
(aarch64_parse_features): Handle dependencies.
(aarch64_feature_enable_set, aarch64_feature_disable_set): New.
(md_assemble): Use AARCH64_CPU_HAS_ALL_FEATURES.
* testsuite/gas/aarch64/illegal-nofp16.s: New.
* testsuite/gas/aarch64/illegal-nofp16.l: New.
* testsuite/gas/aarch64/illegal-nofp16.d: New.
include/
* opcode/aarch64.h (AARCH64_CPU_HAS_ALL_FEATURES): New.
(AARCH64_CPU_HAS_ANY_FEATURES): New.
(AARCH64_CPU_HAS_FEATURE): Define as AARCH64_CPU_HAS_ALL_FEATURES.
(AARCH64_OPCODE_HAS_FEATURE): Remove.
GAS fails to recognize march=armv8.2-a as a superset of march=armv8.1-a
when assembling NEON instructions. The patch corrects this, making
-march=armv8.2-a -mfpu=neon-fp-armv8 enable the NEON intructions
introduced with ARMv8.1-A.
include/
2016-06-30 Matthew Wahab <matthew.wahab@arm.com>
* opcode/arm.h (ARM_ARCH_V8_2a): Add FPU_NEON_EXT_RDMA to the set
of enabled FPU features.
gas/
2016-06-30 Matthew Wahab <matthew.wahab@arm.com>
* testsuite/gas/arm/armv8_2+rdma.d: New.
aarch64_opnd_info used bitfields to hold vector element indices,
but values were stored into those bitfields before their ranges had
been checked. This meant large invalid indices could be silently
truncated to smaller valid indices.
The two obvious fixes were to do the range checking earlier or use
a full 64-bit field for the index. I went for the latter for two
reasons:
- Doing the range checking in operand_general_constraint_met_p
seems structurally cleaner than doing it while parsing.
- The bitfields didn't really buy us anything. The imm field
of the union is already 128 bits, so we can use a full int64_t
index without growing the structure.
The patch also adds missing range checks for the elements in a register
list index.
include/
* opcode/aarch64.h (aarch64_opnd_info): Change index fields to int64_t.
opcodes/
* aarch64-opc.c (operand_general_constraint_met_p): Check the
range of ldst_elemlist operands.
(print_register_list): Use PRIi64 to print the index.
(aarch64_print_operand): Likewise.
gas/
* testsuite/gas/aarch64/diagnostic.s,
testsuite/gas/aarch64/diagnostic.l: Add tests for out-of-range indices.
The code supporting -mspfp, -mdpfp, and -mfpuda options are in
sections of code that are commented as being for backward
compatibility only, and having no effect. However, they do have an
effect, enabling the SPX, DPX, and DPA instruction subclasses
respectively. This commit moves the code supporting these options
away from the comments indicating that they are dummy options, and
also fixes a small issue where -mnps400 had the additional effect
of enabling SPX instructions.
A couple of other minor edits (that make no functional change) are
also included.
gas/ChangeLog:
* config/tc-arc.c (options, md_longopts, md_parse_option):
Move -mspfp, -mdpfp and -mfpuda out of the sections for
dummy options. Correct erroneous enabling of SPFP
instructions when using -mnps400.
include/ChangeLog:
* opcode/arc.h: Make insn_class_t alphabetical again.
opcodes/ChangeLog:
* arc-opc.c: Correct description of availability of NPS400
features.
Its closely related to what the encodings are, more than a set of random
constants, so it seems to make sense to put it here.
include/ChangeLog:
2016-06-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* opcode/tilegx.h: Move TILEGX_NUM_PIPELINE_ENCODINGS into
tilegx_pipeline.
This patch adds support for the opcode architectures
SPARC_OPCODE_ARCH_V9{C,D,E,V,M} and its associated BFD machine numbers
bfd_mach_sparc_v9{c,d,e,v,m} and bfd_mach_sparc_v8plus{c,d,e,v,m}.
Note that for arches up to v9b (UltraSPARC III), the detection of the
BFD machine type was based on the bits in the e_machine field of the ELF
header. However, there are no more available bits in that field, so
this patch takes the approach of using the hardware capabilities stored
in the object attributes HWCAPS/HWCAPS2 in order to characterize the
machine the object was built for.
bfd/ChangeLog:
2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* archures.c (bfd_mach_sparc_v8plusc): Define.
(bfd_mach_sparc_v9c): Likewise.
(bfd_mach_sparc_v8plusd): Likewise.
(bfd_mach_sparc_v9d): Likewise.
(bfd_mach_sparc_v8pluse): Likewise.
(bfd_mach_sparc_v9e): Likewise.
(bfd_mach_sparc_v8plusv): Likewise
(bfd_mach_sparc_v9v): Likewise.
(bfd_mach_sparc_v8plusm): Likewise.
(bfd_mach_sparc_v9m): Likewise.
(bfd_mach_sparc_v9_p): Adapt to v8plusm and v9m.
(bfd_mach_sparc_64bit_p): Likewise.
* bfd-in2.h: Regenerate.
* cpu-sparc.c (arch_info_struct): Add entries for
bfd_mach_sparc_v8plus{c,d,e,v,m} and bfd_mach_sparc_v9{c,d,e,v,m}.
* aoutx.h (machine_type): Handle bfd_mach_sparc_v8plus{c,d,e,v,m}
and bfd_mach_sparc_v9{c,d,e,v,m}.
* elf32-sparc.c (elf32_sparc_final_write_processing): Likewise.
* elfxx-sparc.c (_bfd_sparc_elf_object_p): Likewise.
include/ChangeLog:
2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* opcode/sparc.h (enum sparc_opcode_arch_val): Add
SPARC_OPCODE_ARCH_V9C, SPARC_OPCODE_ARCH_V9D,
SPARC_OPCODE_ARCH_V9E, SPARC_OPCODE_ARCH_V9V and
SPARC_OPCODE_ARCH_V9M.
opcodes/ChangeLog:
2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-dis.c (MASK_V9): Add SPARC_OPCODE_ARCH_V9{C,D,E,V,M}.
(compute_arch_mask): Handle bfd_mach_sparc_v8plus{c,d,e,v,m} and
bfd_mach_sparc_v9{c,d,e,v,m}.
* sparc-opc.c (MASK_V9C): Define.
(MASK_V9D): Likewise.
(MASK_V9E): Likewise.
(MASK_V9V): Likewise.
(MASK_V9M): Likewise.
(v6): Add MASK_V9{C,D,E,V,M}.
(v6notlet): Likewise.
(v7): Likewise.
(v8): Likewise.
(v9): Likewise.
(v9andleon): Likewise.
(v9a): Likewise.
(v9b): Likewise.
(v9c): Define.
(v9d): Likewise.
(v9e): Likewise.
(v9v): Likewise.
(v9m): Likewise.
(sparc_opcode_archs): Add entry for v9{c,d,e,v,m}.
The size field was defined as an instance of an enum, but existing code
treats the size field as a plain integer containing a bit count.
include/ChangeLog:
* opcode/msp430-decode.h (MSP430_Size): Remove.
(Msp430_Opcode_Decoded): Change type of size to int.
sparc-coff has a 20 byte symbol entry with an extra field, but neglects
to initialize the field. Fix that.
* coff/sparc.h (COFF_ADJUST_SYM_OUT_POST): Define.
include/ChangeLog:
2016-06-08 Jose E. Marchesi <jose.marchesi@oracle.com>
* opcode/sparc.h: Add missing documentation for hyperprivileged
registers in rd (%) and rs1 ($).
VLE is an encoding, not a particular processor architecture, so it
isn't really proper to select insns based on PPC_OPCODE_VLE. For
example
{"evaddw", VX (4, 512), VX_MASK, PPCSPE|PPCVLE, PPCNONE, {RS, RA, RB}},
{"vaddubs", VX (4, 512), VX_MASK, PPCVEC|PPCVLE, PPCNONE, {VD, VA, VB}},
shows two insns that have the same encoding, both available with VLE.
Enabling both with VLE means we can't disassemble the second variant
even if -Maltivec is given rather than -Mspe. Also, we don't check
user assembly against the processor type as well as we could.
Another problem is that when using the VLE encoding, insns from the
main ppc opcode table are not available, except those using opcode 4
and 31. Correcting this revealed two errors in the ld testsuite,
use of "nop" and "rfmci" when -mvle.
This patch fixes those problems in the opcode table, and removes
PPCNONE. I find a plain 0 distracts less from other values.
In addition, I've implemented code to recognize some machine values
from the apuinfo note present in ppc32 objects. It's not a complete
disambiguation since we're lacking info to detect newer chips, but
what we have should help with disassembly.
include/
* elf/ppc.h (APUINFO_SECTION_NAME, APUINFO_LABEL, PPC_APUINFO_ISEL,
PPC_APUINFO_PMR, PPC_APUINFO_RFMCI, PPC_APUINFO_CACHELCK,
PPC_APUINFO_SPE, PPC_APUINFO_EFS, PPC_APUINFO_BRLOCK,
PPC_APUINFO_VLE: Define.
opcodes/
* ppc-dis.c (ppc_opts): Delete extraneous parentheses. Default
cpu for "vle" to e500.
* ppc-opc.c (ALLOW8_SPRG): Remove PPC_OPCODE_VLE.
(NO371, PPCSPE, PPCISEL, PPCEFS, MULHW, DCBT_EO): Likewise.
(PPCNONE): Delete, substitute throughout.
(powerpc_opcodes): Remove PPCVLE from "flags". Add to "deprecated"
except for major opcode 4 and 31.
(vle_opcodes <se_rfmci>): Add PPCRFMCI to flags.
bfd/
* cpu-powerpc.c (powerpc_compatible): Allow bfd_mach_ppc_vle entry
to match other 32-bit archs.
* elf32-ppc.c (_bfd_elf_ppc_set_arch): New function.
(ppc_elf_object_p): Call it.
(ppc_elf_special_sections): Use APUINFO_SECTION_NAME. Fix
overlong line.
(APUINFO_SECTION_NAME, APUINFO_LABEL): Don't define here.
* elf64-ppc.c (ppc64_elf_object_p): Call _bfd_elf_ppc_set_arch.
* bfd-in.h (_bfd_elf_ppc_at_tls_transform,
_bfd_elf_ppc_at_tprel_transform): Move to..
* elf-bfd.h: ..here.
(_bfd_elf_ppc_set_arch): Declare.
* bfd-in2.h: Regenerate.
gas/
* config/tc-ppc.c (PPC_APUINFO_ISEL, PPC_APUINFO_PMR,
PPC_APUINFO_RFMCI, PPC_APUINFO_CACHELCK, PPC_APUINFO_SPE,
PPC_APUINFO_EFS, PPC_APUINFO_BRLOCK, PPC_APUINFO_VLE): Don't define.
(ppc_setup_opcodes): Check vle disables powerpc_opcodes overridden
by vle_opcodes, and that vle flag doesn't enable opcodes. Don't
add vle_opcodes twice.
(ppc_cleanup): Use APUINFO_SECTION_NAME and APUINFO_LABEL.
ld/
* testsuite/ld-powerpc/apuinfo1.s: Delete nop.
* testsuite/ld-powerpc/apuinfo-vle2.s: New.
* testsuite/ld-powerpc/powerpc.exp: Use apuinfo-vle2.s.
This patch adds the architecture extension "+ras" to enable RAS
support. It is enabled by default for -march=armv8.2-a and available but
disabled by default for armv8-a and armv8.1-a.
gas/
* config/tc-arm.c (arm_ext_v8_2): Rename to arm_ext_ras.
(arm_ext_ras): Renamed from arm_ext_v8_2.
(insns): Update for arm_ext_v8_2 renaming.
(arm_extensions): Add "ras".
* doc/c-arm.texi (ARM Options): Add an entry for "ras".
* testsuite/gas/arm/armv8-a+ras.d: New.
* testsuite/gas/arm/armv8_2-a.d: Add explicit command line
options.
include/
* opcode/arm.h (ARM_EXT2_RAS): New. Also align preceding
entries.
(ARM_AEXT_V8_2A): Add ARM_EXT2_RAS.
opcodes/
* arm-dis.c (arm_opcodes): Replace ARM_EXT_V8_2A with
ARM_EXT_RAS in relevant entries.
gas * config/tc-arc.c (parse_opcode_flags): New function.
(find_opcode_match): Move flag parsing code out to new function.
Ignore operands marked IGNORE.
(build_fake_opcode_hash_entry): New function.
(find_special_case_long_opcode): New function.
(find_special_case): Lookup long opcodes.
* testsuite/gas/arc/nps400-7.d: New file.
* testsuite/gas/arc/nps400-7.s: New file.
include * opcode/arc.h (MAX_INSN_ARGS): Increase to 16.
(struct arc_long_opcode): New structure.
(arc_long_opcodes): Declare.
(arc_num_long_opcodes): Declare.
opcodes * arc-dis.c (struct arc_operand_iterator): New structure.
(find_format_from_table): All the old content from find_format,
with some minor adjustments, and parameter renaming.
(find_format_long_instructions): New function.
(find_format): Rewritten.
(arc_insn_length): Add LSB parameter.
(extract_operand_value): New function.
(operand_iterator_next): New function.
(print_insn_arc): Use new functions to find opcode, and iterator
over operands.
* arc-opc.c (insert_nps_3bit_dst_short): New function.
(extract_nps_3bit_dst_short): New function.
(insert_nps_3bit_src2_short): New function.
(extract_nps_3bit_src2_short): New function.
(insert_nps_bitop1_size): New function.
(extract_nps_bitop1_size): New function.
(insert_nps_bitop2_size): New function.
(extract_nps_bitop2_size): New function.
(insert_nps_bitop_mod4_msb): New function.
(extract_nps_bitop_mod4_msb): New function.
(insert_nps_bitop_mod4_lsb): New function.
(extract_nps_bitop_mod4_lsb): New function.
(insert_nps_bitop_dst_pos3_pos4): New function.
(extract_nps_bitop_dst_pos3_pos4): New function.
(insert_nps_bitop_ins_ext): New function.
(extract_nps_bitop_ins_ext): New function.
(arc_operands): Add new operands.
(arc_long_opcodes): New global array.
(arc_num_long_opcodes): New global.
* arc-nps400-tbl.h: Add comments referencing arc_long_opcodes.
generic gas code has a struct symbol, and tic54x typedefs a struct to symbol.
This seems at least rather confusing, and it seems like target specific headers
shouldn't put such generic names in the global namespace preventing other
generic code from using them.
opcodes/ChangeLog:
2016-05-23 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* tic54x-dis.c (sprint_mmr): Adjust.
* tic54x-opc.c: Likewise.
gas/ChangeLog:
2016-05-23 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* config/tc-tic54x.c (tic54x_mmregs): Adjust.
(md_begin): Likewise.
(encode_condition): Likewise.
(encode_cc3): Likewise.
(encode_cc2): Likewise.
(encode_operand): Likewise.
(tic54x_undefined_symbol): Likewise.
include/ChangeLog:
2016-05-23 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
* opcode/tic54x.h (struct symbol_): typedef to tic54x_symbol instead of
plain symbol.
2016-05-10 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* elf32-arm.c (elf32_arm_size_stubs): Use new macros
ARM_GET_SYM_BRANCH_TYPE and ARM_SET_SYM_BRANCH_TYPE to respectively get
and set branch type of a symbol.
(bfd_elf32_arm_process_before_allocation): Likewise.
(elf32_arm_relocate_section): Likewise and fix identation along the
way.
(allocate_dynrelocs_for_symbol): Likewise.
(elf32_arm_finish_dynamic_symbol): Likewise.
(elf32_arm_swap_symbol_in): Likewise.
(elf32_arm_swap_symbol_out): Likewise.
gas/
* config/tc-arm.c (arm_adjust_symtab): Use ARM_SET_SYM_BRANCH_TYPE to
set branch type of a symbol.
gdb/
* arm-tdep.c (arm_elf_make_msymbol_special): Use
ARM_GET_SYM_BRANCH_TYPE to get branch type of a symbol.
include/
* arm.h (enum arm_st_branch_type): Add new ST_BRANCH_ENUM_SIZE
enumerator.
(NUM_ENUM_ARM_ST_BRANCH_TYPE_BITS): New macro.
(ENUM_ARM_ST_BRANCH_TYPE_BITMASK): Likewise.
(ARM_SYM_BRANCH_TYPE): Replace by ...
(ARM_GET_SYM_BRANCH_TYPE): This and ...
(ARM_SET_SYM_BRANCH_TYPE): This in two versions depending on whether
BFD_ASSERT is defined or not.
ld/
* emultempl/armelf.em (gld${EMULATION_NAME}_finish): Use
ARM_GET_SYM_BRANCH_TYPE to get branch type of a symbol.
opcodes/
* arm-dis.c (get_sym_code_type): Use ARM_GET_SYM_BRANCH_TYPE to get
branch type of a symbol.
(print_insn): Likewise.
2016-05-10 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (struct arm_option_extension_value_table): Make
allowed_archs an array with 2 entries.
(ARM_EXT_OPT): Adapt to only fill the first entry of allowed_archs.
(ARM_EXT_OPT2): New macro filling the two entries of allowed_archs.
(arm_extensions): Use separate entries in allowed_archs when several
archs are allowed to use an extension and change ARCH_ANY in
ARM_ARCH_NONE in allowed_archs.
(arm_parse_extension): Check that, for each allowed_archs entry, all
bits are set in the current architecture, ignoring ARM_ANY entries.
(s_arm_arch_extension): Likewise.
include/
* arm.h (ARM_FSET_CPU_SUBSET): Define macro.
2016-05-10 Thomas Preud'homme <thomas.preudhomme@arm.com>
gas/
* config/tc-arm.c (arm_ext_m): Add feature bit ARM_EXT2_V8M_MAIN.
(arm_ext_v8m_main): New feature set for bit ARM_EXT2_V8M_MAIN.
(arm_ext_v8m_m_only): New feature set for instructions in ARMv8-M not
shared with a non M profile architecture.
(do_rn): New function.
(known_t32_only_insn): Check opcode against arm_ext_v8m_m_only rather
than arm_ext_v8m.
(v7m_psrs): Add ARMv8-M security extensions new special registers.
(insns): Add ARMv8-M Security Extensions instructions.
(aeabi_set_public_attributes): Use arm_ext_v8m_m_only instead of
arm_ext_v8m_m to decide the profile and the Thumb ISA.
* testsuite/gas/arm/archv8m-cmse.s: New file.
* testsuite/gas/arm/archv8m-cmse-main.s: Likewise..
* testsuite/gas/arm/archv8m-cmse-msr.s: Likewise.
* testsuite/gas/arm/any-cmse.d: Likewise.
* testsuite/gas/arm/any-cmse-main.d: Likewise.
* testsuite/gas/arm/archv8m-cmse-base.d: Likewise.
* testsuite/gas/arm/archv8m-cmse-msr-base.d: Likewise.
* testsuite/gas/arm/archv8m-cmse-main-1.d: Likewise.
* testsuite/gas/arm/archv8m-cmse-main-2.d: Likewise.
* testsuite/gas/arm/archv8m-cmse-msr-main.d: Likewise.
include/
* opcode/arm.h (ARM_EXT2_V8M_MAIN): new feature bit.
(ARM_AEXT2_V8M_MAIN): New architecture extension feature set.
(ARM_ARCH_V8M_MAIN): Use ARM_AEXT2_V8M_MAIN instead of ARM_AEXT2_V8M
for the high core bits.
opcodes/
* arm-dis.c (coprocessor_opcodes): Add entries for VFP ARMv8-M
Mainline Security Extensions instructions.
(thumb_opcodes): Add entries for narrow ARMv8-M Security
Extensions instructions.
(thumb32_opcodes): Add entries for wide ARMv8-M Security Extensions
instructions.
(psr_name): Add new MSP_NS and PSP_NS ARMv8-M Security Extensions
special registers.
PR target/19722
opcodes * aarch64-dis.c (aarch64_opcode_decode): Run verifier if present.
* aarch64-opc.c (verify_ldpsw): New function.
* aarch64-opc.h (verify_ldpsw): New prototype.
* aarch64-tbl.h: Add initialiser for verifier field.
(LDPSW): Set verifier to verify_ldpsw.
binutils* testsuite/binutils-all/aarch64/illegal.s: New test.
* testsuite/binutils-all/aarch64/illegal.d: New test driver.
include * opcode/aarch64.h (struct aarch64_opcode): Add verifier field.
include/
* bfdlink.h (struct bfd_link_hash_entry): Add "section" field to
undef. Formatting.
bfd/
* elflink.c (_bfd_elf_is_start_stop): New function.
(_bfd_elf_gc_mark_rsec): Use it.
* elf-bfd.h (_bfd_elf_is_start_stop): Declare.
Delaying checking ELF relocations until opening all input files so
that symbol information is final when relocations are checked. This
is only enabled for x86 targets.
bfd/
* elf-bfd.h (_bfd_elf_link_check_relocs): New.
* elflink.c (_bfd_elf_link_check_relocs): New function.
(elf_link_add_object_symbols): Call _bfd_elf_link_check_relocs
if check_relocs_after_open_input is FALSE.
include/
* bfdlink.h (bfd_link_info): Add check_relocs_after_open_input.
ld/
* emulparams/elf32_x86_64.sh (CHECK_RELOCS_AFTER_OPEN_INPUT):
New.
* emulparams/elf_i386.sh (CHECK_RELOCS_AFTER_OPEN_INPUT):
Likewise.
* emulparams/elf_i386_be.sh (CHECK_RELOCS_AFTER_OPEN_INPUT):
Likewise.
* emulparams/elf_i386_chaos.sh (CHECK_RELOCS_AFTER_OPEN_INPUT):
Likewise.
* emulparams/elf_i386_ldso.sh (CHECK_RELOCS_AFTER_OPEN_INPUT):
Likewise.
* emulparams/elf_i386_vxworks.sh (CHECK_RELOCS_AFTER_OPEN_INPUT):
Likewise.
* emulparams/elf_x86_64.sh (CHECK_RELOCS_AFTER_OPEN_INPUT):
Likewise.
* emulparams/i386nto.sh (CHECK_RELOCS_AFTER_OPEN_INPUT):
Likewise.
* emultempl/elf32.em (gld${EMULATION_NAME}_before_parse):
Set check_relocs_after_open_input to TRUE if
CHECK_RELOCS_AFTER_OPEN_INPUT is yes.
(gld${EMULATION_NAME}_after_open): Call
_bfd_elf_link_check_relocs on all inputs if
check_relocs_after_open_input is TRUE.
The ME modifier was missing from the relocation formula for the
ARC_NPS_CMEM16 relocation, and as such the relocation would not patch
correctly on little endian targets.
include/ChangeLog:
* elf/arc-reloc.def (ARC_NPS_CMEM16): Add ME modifier to formula.
